journal article·2015-10Open access

Microstructural Effects on Damage Nucleation in Shock-Loaded Polycrystalline Copper

Andrew David Brown, Leda Wayne, Quan Pham, Kapil Krishnan, Pedro Peralta, Sheng-Nian Luo, Brian M. Patterson, Scott Greenfield, Darrin Byler, Kenneth J. McClellan, Aaron Koskelo, Rob Dickerson, Xianghui Xiao

Abstract

Polycrystalline copper samples with varying thermomechanical histories were shock loaded to induce spall via laser-driven plate impacts at low shock stress (<6 GPa). Electron backscattering diffraction was used to obtain statistics on grain boundary (GB) misorientations within the spall plane and at all GBs that contained damage. Specimens with pre-existing plastic deformation showed dominant intergranular damage at boundaries in the 25 to 50 deg misorientation range, while heat-treated samples had mixed trans- and intergranular damage with a lessened misorientation influence at damaged GBs. 3-D X-ray tomography data were used to analyze global volume statistics and qualitatively inspect the shape of voids present in samples of varying thermomechanical histories. It was found that annealed samples had a mixed mode of spherical- and sheet-like voids, indicative of trans- and intergranular damage, respectively, and the microstructure with the highest number of Σ3 twin boundaries had the highest concentration of spherical voids. Data from a plastically pre-strained sample showed a dominance of needle- and sheet-like voids, indicating primarily intergranular damage due to the higher strength of the bulk material forcing the damage to nucleate at weaker defects, in this case GBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. D.R. Curran, L. Seaman, D.A. Shockey, Phys. Rep. 147 (1897), pp. 253–388.10.1016/0370-1573(87)90049-4 ↗
2. D.E. Grady, J. Mech. Phys. Sol. 36 (1988), pp. 353–84.10.1016/0022-5096(88)90015-4 ↗
3. M.A. Meyers, Dynamic Behavior of Materials, John Wiley & Sons, New York, 1994.10.1002/9780470172278 ↗
4. R. Vignjevic, N.K. Bourne, J.C.F. Millet, T. De Vuyst, J. Appl. Phys. 92 (2002), pp. 4342–48.10.1063/1.1505996 ↗
5. R.W. Minich, J.U. Cazamias, M. Kumar, A.J. Schwartz, Metall. Mater. Trans. A 35A (2004), pp. 2663–73.10.1007/s11661-004-0212-7 ↗
6. B.L. Henrie, T.A. Mason, and J.F. Bingert: in Shock Compression of Condensed Matter 2005, M.D. Furnish, M. Elert, T.P. Russell, and C.T. White, eds., American Institute of Physics, Melville, NT, 2005.
7. C. Czarnota, N. Jacques, S. Mercier, A. Molinari, J. Mech. Phys. Sols. 56 (2008), pp. 1624–50.10.1016/j.jmps.2007.07.017 ↗
8. P. Peralta, S. DiGiacomo, S. Hashemian, S.N. Luo, D. Paisley, R. Dickerson, E. Loomis, D. Byler, K.J. McClellan, and H.D’Armas: Int. J. Damage, 2009, vol. 18, pp. 393–413.10.1177/1056789508097550 ↗
9. L. Wayne, K. Krishnan, S. DiGiacomo, N. Kovvali, P. Peralta, S.N. Luo, S. Greenfield, D. Byler, D. Paisley, K.J. McClellan, A. Koskelo, and R. Dickerson: Scr. Mater., 2010, vol. 63, pp. 1065–68.10.1016/j.scriptamat.2010.08.003 ↗
10. J.P. Escobedo, D. Dennis-Koller, E.K. Cerreta, B.M Patterson, C.A. Bronkhorst, B.L. Hansen, D. Tonks, and R.A. Lebensohn: J. Appl. Phys., 2011, vol. 110, p. 033513.10.1063/1.3607294 ↗
11. J.P. Escobedo, E.K. Cerreta, D. Dennis-Koller, JOM 66 (2014), pp. 156–64.10.1007/s11837-013-0798-6 ↗
12. A. Brown, K. Krishnan, L. Wayne, P. Peralta, S.N. Luo, D. Byler, and B. Patterson: ASME IMECE, San Diego, CA, 2013, p. 65642.
13. W. Han, Q. An, S.N. Luo, T. Germann, D. Tonks, W. Goddard, Phys. Rev. B 85 (2012), pp. 024107.10.1103/PhysRevB.85.024107 ↗
14. E.Q. Lin, H.J. Shi, L.S. Niu, E.Z. Jin, Comput. Mater. Sci. 59 (2012), pp. 94–100.10.1016/j.commatsci.2012.02.025 ↗
15. S.J. Fensin, J.P. Escobedo, C. Brandl, E.K. Cerreta, G.T. Gray III, T.C. Germann, S.M. Valone, Acta Mater. 64 (2014), pp. 113–22.10.1016/j.actamat.2013.11.026 ↗
16. J.F. Bingert, B.L. Henrie, D.L. Worthington, Metall. Mater. Trans. A 38A (2007), pp. 1712–21.10.1007/s11661-007-9216-4 ↗
17. A.P. Sutton, R.W. Ballufi, Interfaces in Crystalline Materials, Oxford University Press, New York, 1995.
18. N.L. Johnson, Biometrika 36 (1949), pp. 149–76.10.1093/biomet/36.1-2.149 ↗
19. H.H. Ku, J. Res. Nat. Bur. Stand. 70C (1966), pp. 263–73.
20. B.M Patterson, J.P. Escobedo, D. Dennis-Koller, E. Cerreta, Microsc. Microanal. 18 (2012), pp. 390–98.10.1017/S1431927611012554 ↗
21. A.L. Stevens, L. Davidson, and W.E. Warren: J. Appl. Phys., 1972, vol. 43, pp. 4922–27.10.1063/1.1661046 ↗
22. V. Randle, Interf. Sci. 10 (2002), pp. 271–77.10.1023/A:1020877528820 ↗
23. J.K. MacKenzie, Biometrika 45 (1958), pp. 229–40.10.1093/biomet/45.1-2.229 ↗
24. D.G. Brandon, Acta Metall. 14 (1966), pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗