journal article·2012-07

Quantitative Analysis of Variant Selection for Displacive Transformations Under Stress

Saurabh Kundu, Anil Kumar Verma, Vikram Sharma

Publisher page

Abstract

The existing variant selection models for displacive transformations are mostly qualitative in nature and attempt to predict the bulk texture using several fitting parameters. Many of these models use Kurdjumov-Sach (K-S) type orientation relationships (ORs) and ignore the phenomenological theory of martensite crystallography. So far there has not been any attempt to assess variant selection in the level of individual variants within one austenite grain. In this work, new kinds of experiments and innovative mathematical models have been developed to critically assess the variant selection phenomenon during bainite transformation under externally applied stress. Volume fractions of individual variants in a austenite grain have been calculated for the first time. Patel and Cohen’s theory on variant selection has been used in a new mathematical framework. Hitherto unknown aspects of variant selection have been found, which is exciting and provides new insight into the subject.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
2. J.C. Bokros and E.R. Parker: Acta Metall., 1963, vol. 11, pp. 1291–1301.10.1016/0001-6160(63)90024-5 ↗
3. T.N. Durlu and J.W. Christian: Acta Metall., 1979, vol 11, pp. 663–66.10.1016/0001-6160(79)90017-8 ↗
4. Y. Higo, F. Leeroisey, and T. Mori: Acta Metall., 1974, vol. 22, pp. 313–23.10.1016/0001-6160(74)90170-9 ↗
5. H. Miyaji, M. Nobuki, N. Sakuma, T. Mitsui, H. Nakajima, and E. Furubayashi: Proc. Int. Conf. on “Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals”, Thermec, Tokyo, Japan, 1988, vol. 2, pp. 815–22.
6. P. Bate and B. Hutchinson: Acta Mater., 2000, vol. 48, pp. 3183–92.10.1016/S1359-6454(00)00106-3 ↗
7. V. Pancholi, M. Krishnan, I.S. Samajdar, V. Yadav, and N.B. Ballal: Acta Mater., 2008, vol. 56, pp. 2037–50.10.1016/j.actamat.2007.12.057 ↗
8. N.J. Wittridge, J.J. Jonas, and J.H. Root: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 889–901.10.1007/s11661-001-0346-9 ↗
9. S. Kundu and H.K.D.H. Bhadeshia: Scripta Mater., 2006, vol. 55, pp. 779–81.10.1016/j.scriptamat.2006.07.021 ↗
10. S. Kundu and H.K.D.H. Bhadeshia: Scripta Mater., 2007, vol. 57, pp. 869–72.10.1016/j.scriptamat.2007.06.056 ↗
11. N. Gey, B. Petit, and M. Humbert: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3291–99.10.1007/s11661-005-0003-9 ↗
12. M.P. Butron-Guillen, C.S. Da Costa Viana, and J.J. Jonas: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1755–68.10.1007/s11661-997-0107-5 ↗
13. L. Kestens, R. Petrov, and Y. Houbeart: ISIJ Int., 2003, vol. 43, pp. 1444–52.10.2355/isijinternational.43.1444 ↗
14. L. Kestens, R. Docker, and R. Petrov: Mater. Sci. Forum, 2002, vols. 408–412, pp. 1173–78.10.4028/www.scientific.net/MSF.408-412.1173 ↗
15. S. Kundu: Scripta Mater., 2008, vol. 58, pp. 934–36.10.1016/j.scriptamat.2007.11.047 ↗
16. S. Kundu, K. Hase, and H.K.D.H. Bhadeshia: Proc. R. Soc. Lond. A, 2007, vol. 463, pp. 2309–28.10.1098/rspa.2007.1881 ↗
17. S. Kundu: Ph.D. Thesis, University of Cambridge, Cambridge, United Kingdom, 2007.
18. J.S. Bowles and J.K. MacKenzie: Acta Metall., 1954, vol. 2, pp. 129–37.10.1016/0001-6160(54)90102-9 ↗
19. J.K. MacKenzie and J.S. Bowles: Acta Metall., 1954, vol. 2, pp. 138–47.10.1016/0001-6160(54)90103-0 ↗
20. M.S. Wechsler, D.S. Lieberman, and T.A. Read: Trans. AIME, 1953, vol. 197, pp. 1503–15.
21. G. Kurdjumov and G. Sachs: Z. Physik., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
22. Z. Nishiyama: Technical Report No. 23, Science Report, Tohoku Imperial University, Tokyo, 1934, pp. 637–61.
23. G. Wassermannn: Mitt. K.-With.-Inst. Eisenforsch, 1935, vol. 17, pp. 149–55.
24. G. Nolze: Cryst. Res. Technol., 2008, vol. 43, pp. 61–73.10.1002/crat.200711058 ↗
25. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
26. N. Stanford and P.S. Bate: Acta Mater., 2005, vol. 53, pp. 859–67.10.1016/j.actamat.2004.10.043 ↗
27. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215–24.10.1016/j.actamat.2004.07.034 ↗
28. M. Humbert and N. Gey: Acta Mater., 2003, vol. 51, pp. 4783–90.10.1016/S1359-6454(03)00318-5 ↗
29. J. Romero, M. Preuss, and J.Q. Fonseca: Acta Mater., 2009, vol. 57, pp. 5501–11.10.1016/j.actamat.2009.07.046 ↗
30. N.R. Barton, D.J. Benson, and R. Becker: Model. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 707–31.10.1088/0965-0393/13/5/006 ↗
31. K. Hase, C.G. Mateo, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2004, vol. 20, pp. 1499–1505.10.1179/026708304X6130 ↗
32. J.H. Cho, A.D. Rollett, and K.H. Oh: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3427–38.10.1007/s11661-005-0016-4 ↗
33. H.K.D.H. Bhadeshia: Bainite in Steel, 2nd ed., Institute of Materials, London, 2001.
34. H.J. Stone, M.J. Peet, and H.K.D.H. Bhadeshia: Proc. Roy. Soc. London A, 2008, vol. 436, pp. 1009–27.
35. S.P. Timoshenko and J.N. Goodier: Theory of Elasticity, McGraw-Hill International Book Company, London, 1982.
36. H.K.D.H. Bhadeshia: Geometry of Crystals, 2nd ed., Institute of Materials, London, 2001.
37. Z. Guo, C.S. Lee, and J.W. Morris, Jr.: Acta Mater., 2004, vol. 52, pp. 5511–18.10.1016/j.actamat.2004.08.011 ↗
38. Y. He, S. Godet, P.J. Jacques, and J.J. Jonas: Acta Mater., 2006, vol. 54, pp. 1323–34.10.1016/j.actamat.2005.11.008 ↗
39. M.M. Desu and D. Raghavarao: Nonparametric Statistical Methods for Complete and Censored Data, Chapman & Hall/CRC Press, Boca Raton, FL, 2004.
40. J.W. Christian: Proc. Int. Conf. on Martensitic Transformations ICOMAT, 1979, pp. 220–34.
41. A. Lambert-Perlade, A.F. Gourgues, and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337–48.10.1016/j.actamat.2004.01.025 ↗