journal article·2001-05

Dependency of fracture toughness on the inhomogeneity of coarse TiN particle distribution in a low alloy steel

L. P. Zhang, C. L. Davis, M. Strangwood

Publisher page

Abstract

An investigation of the effect of the coarse TiN particle distribution on the fracture toughness of a steel, as determined by crack-tip opening displacement (CTOD), was carried out using a range of samples from a Ti-treated steel that had been thermally cycled to simulate a coarse grained heat-affected zone (CG HAZ) microstructure. Experimental results from tests carried out at room temperature showed that the inhomogeneous spatial distribution of the coarse TiN particles in the microstructure ahead of the fatigue precrack caused the samples to fail with significantly different CTOD values. Detailed fractographic investigation showed that, with an increased number of overall fracture initiation sites (FISs) and number density of local cleavage initiation sites (CISs) caused by coarse TiN particles, the fracture toughness CTOD values generally decreased. The increase in FIS number and CIS number density has been related to the inhomogeneous coarse TiN distribution ahead of the fatigue precrack and so the sampling of microstructural areas with a high number density of coarse TiN particles. The mechanism by which the coarse TiN particles cause cleavage fracture initiation is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. D.C. Houghton: Thermomechanical Processing of Microalloyed Austenite, TMS-AIME, Warrendale, PA, 1982, pp. 267–92.
2. D.B. McCutcheon: Rev. Metall., 1976, Feb., pp. 143–74.10.1051/metal/197673020143 ↗
3. L.P. Zhang: Ph.D. Thesis, The University of Birmingham, Birmingham, 2000.
4. J.F. Knott: Proc. ECF9, S. Sedmak, A. Sedmak, and D. Ruzic, eds., EMAS, Walsall, U.K., 1992, vol. 2, pp. 1375–1400.
5. K. Ohya, J. Kim, K. Yokoyama, and M. Nagumo: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2574–82.10.1007/BF02652351 ↗
6. L.P. Zhang, C.L. Davis, and M. Strangwood: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2089–96.10.1007/s11661-999-0019-7 ↗
7. P.L. Harrison and P.H. Bateson: Titanium Technology in Microalloyed Steels, T.N. Baker, ed., Institute of Materials, London, 1997, pp. 180–96.
8. J.Y. Li and W.Y. Zhang: Iron Steel Inst. Jpn., 1989, vol. 29(2), pp. 158–64.10.2355/isijinternational.29.158 ↗
9. Ø. Grong: Metallurgical Modelling of Welding, Institute of Materials, London, 1992, pp. 485–95.
10. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibaba, and J.J. Urcola: Scripta Metall., 1993, vol. 29, pp. 451–56.10.1016/0956-716X(93)90146-J ↗
11. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibaba, and J.J. Urcola: 36th MWSP Conf. Proc., ISS-AIME, Warrendale, PA, 1995, vol. XXXII, pp. 483–94.
12. Fracture Mechanics Toughness Test (Draft), British Standard BS 7448, 1991, part 1.
13. H.L. Ewalds and R.J.H. Wanhill: Fracture Mechanics, Edward Arnold, London, 1989, pp. 55–66.
14. J.F. Knott: Fundamentals of Fracture Mechanics, Butterworth and Co., London, 1973.
15. D. Broek: Elementary Engineering Fracture Mechanics, 4th ed., Kluwer Academic Publishers, Hingham, MA, 1991, pp. 99–116.
16. J.E. Berry, J.Z. Morris, C.L. Davis, and M. Strangwood: Proc. 32nd Annual IMS Convention, Cincinnati, OH, Oct. 31–Nov. 4, 1999, ASM INTERNATIONAL, Materials Park, OH, 1999.
17. B. Lawn: Fracture of Brittle Solids, Cambridge University Press, Cambridge, United Kingdom, 1993, pp. 328–29.10.1017/CBO9780511623127 ↗
18. D. Brooksbank and K.W. Andrews: J. Iron Steel Inst., 1968, vol. 206, pp. 595–99.
19. D. Brooksbank and K.W. Andrews: J. Iron Steel Inst., 1969, vol. 207, pp. 474–86.
20. J.B. Moss: Properties of Engineering Materials, Butterworth and Co., London, 1971, pp. 285–586.
21. R. Morrell: Handbook of Properties of Technical and Engineering Ceramics, Her Majesty’s Stationery Office, London, 1985, pp. 73–92.
22. I.M. Low: Advanced Ceramic Tools for Machining Applications—III, Trans Tech Publications, Aedermannsdorf, Switzerland, 1998, pp. 522–26.