Methods for Designing Concurrently Strengthened Severely Deformed Age-Hardenable Aluminum Alloys by Ultrafine-Grained and Precipitation Hardenings
Source abstract
Abstract
The age-hardenings behavior and precipitate microstructures with high dislocation density and/or ultrafine grains have been studied for 6022Al-Mg-Si and 2091Al-Li-Cu alloys. The high-pressure torsion (HPT) specimen of the former alloy exhibited either suppressed age hardenings or even age softening, unlike in the cases of the undeformed and cold-rolled specimens, at room temperature (RT) to 443 K (170 °C). On the other hand, the HPT specimen of the latter alloy successfully increased the hardness up to >HV290 at 373 K (100 °C), suggesting that concurrent strengthening by ultrafine-grained and precipitation hardenings can be activated if both alloy system and aging temperature are optimally selected. The corresponding transmission electron microscopy (TEM) microstructures attributed such a high level of hardness to the transgranular precipitation of the nanometer-scale particles within ultrafine grains. From the results of in situ small-angle X-ray scattering (SAXS) measurements, methods to maximize the effect of the combined processing of severe plastic deformation (SPD) and the age-hardenings technique are proposed based on the underlying phase transformation mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski and A. Yanagida: Manufacturing Technology, 2008, vol. 57, pp. 716-735.10.1016/j.cirp.2008.09.005 ↗
2. S. Takaki: Bull. Iron Steel Inst. Jpn., 2008, vol. 13, pp. 44–49.
3. N. Tsuji, T. Iwata, M. Sato, S. Fujimoto and Y. Minamino: Science and Technology of Advanced Materials, 2004, vol. 5, pp. 173-180.10.1016/j.stam.2003.10.019 ↗
4. W.J. Kim, C.S. Chung, D.S. Ma, S.I. Hong and H.K. Kim: Scripta Mater., 2003, vol.49, pp. 333-338.10.1016/S1359-6462(03)00260-4 ↗
5. S. Cheng, Y.H. Zhao, Y.T. Zhu and E. Ma: Acta Mater., 2007, vol. 55, pp. 5822-5832.10.1016/j.actamat.2007.06.043 ↗
6. W.J. Kim, J.K. Kim, T.Y. Park, S.I. Hong, D.I. Kim, Y.S. Kim and J.D. Lee: Metall. Mater. Trans., 2002, vol. 33A, pp. 3155-3164.10.1007/s11661-002-0301-4 ↗
7. M.S. Tsai, P.L. Sun, P.W. Kao and C.P. Chang: Mater. Trans. JIM, 2009, vol. 50, pp. 771-775.10.2320/matertrans.MRA2008468 ↗
8. M.R. Rezaei, M.R. Toroghinejad and F. Ashrafizadeh: J. Materials Processing Technology, 2011, vol. 211, pp. 1184-1190.10.1016/j.jmatprotec.2011.01.023 ↗
9. S. Hirosawa: Yokohama National University, Yokohama, Japan, Unpublished Research, 2013.
10. T. Masuda, S. Hirosawa, Z. Horita and K. Matsuda: J. Japan Inst. Metals, 2011, vol. 75, pp. 283-290.10.2320/jinstmet.75.283 ↗
11. T. Masuda, S. Hirosawa, Z. Horita and K. Matsuda: Mater. Sci. Forum, 2012, vol. 706-709, pp. 1787-1792.10.4028/www.scientific.net/MSF.706-709.1787 ↗
12. M. Vaseghi and H.S. Kim: Materials and Design, 2012, vol. 36, pp. 735-740.10.1016/j.matdes.2011.12.014 ↗
13. Z. Horita: Mater. Sci. Forum, 2006, vol. 519-521, pp. 1485-1492.10.4028/www.scientific.net/MSF.519-521.1485 ↗
14. K. Nakagawa, N. Tsuji, D. Terada, T. Nakano, K. Nizam and T. Kanadani: J. Japan Inst. Light Metals, 2012, vol. 62, pp. 442-447.10.2464/jilm.62.442 ↗
15. Y.H. Zhao, X.Z. Liao, S. Cheng, E. Ma and Y.T. Zhu: Adv. Mater., 2006, vol. 18, pp. 2280-2283.10.1002/adma.200600310 ↗
16. Z. Horita: J. Japan Inst. Light Metals, 2010, vol. 60, pp. 134-141.10.2464/jilm.60.134 ↗
17. Z. Horita, K. Ohashi, T. Fujita, K. Kaneko and T.G. Langdon: Adv. Mater., 2005, vol. 17, pp. 1599-1602.10.1002/adma.200500069 ↗
18. K. Ohashi, T. Fujita, K. Kaneko, Z. Horita and T.G. Langdon: Mater. Sci. Eng. A, 2006, vol. 437, pp. 240-247.10.1016/j.msea.2006.08.024 ↗
19. S. Lee, Z. Horita, S. Hirosawa and K. Matsuda: Mater. Sci. Eng. A, 2012, vol. 546, pp. 82-89.10.1016/j.msea.2012.03.029 ↗
20. H. Motoshima, S. Hirosawa, S. Lee, Z. Horita, K. Matsuda and D. Terada: Proc. 13th Int. Conf. Aluminum Alloys, 2012, pp. 939–44.10.1007/978-3-319-48761-8_141 ↗
21. G. Sakai, Z. Horita and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 393, pp. 344-351.10.1016/j.msea.2004.11.007 ↗
22. Y. Ito and Z. Horita: Mater. Sci. Eng. A, 2009, vol. 503, pp. 32-36.10.1016/j.msea.2008.03.055 ↗
23. A.G. Khachaturyan, T.F. Lindsey and J.W. Morris Jr.: Metall. Trans. A, 1988, vol. 19A, pp. 249–58.10.1007/BF02652533 ↗
24. P. Gomiero, F. Livet, Y. Brechet and F. Louchet: Acta metal. mater., 1992, vol. 40, pp. 847-855.10.1016/0956-7151(92)90027-C ↗
25. T. Sato and A. Kanio: Mater. Trans. JIM, 1990, vol. 31, pp. 25-30.10.2320/matertrans1989.31.25 ↗
26. S. Spooner, D.B. Williams and C.M. Sung: Aluminum-Lithium Alloys III, Inst. Metals, London, 1986, pp. 329-36.
27. K. Kaneko, T. Hata, T. Tokunaga and Z. Horita, Mater. Trans. JIM, 2009, vol. 50, pp. 76–81.10.2320/matertrans.MD200813 ↗
28. W. Goto, T. Hamaoka, S. Hirosawa, Z. Horita, S. Lee, K. Matsuda and D. Terada: Proc. 124th Conf. Japan Inst. Light Metals, 2013, in press.