journal article·2006-06

Correlation of microstructure and wear resistance of Al2O3-TiO2 coatings plasma sprayed with nanopowders

Jeehoon Ahn, Byoungchul Hwang, Eun Pil Song, Sunghak Lee, Nack J. Kim

Publisher page

Abstract

Correlation of microstructure and wear resistance of Al2O3-TiO2 coatings plasma sprayed with nanopowders was investigated in this study. Four kinds of nanostructured Al2O3-13 wt pct TiO2 coatings were fabricated by varying plasma-spraying parameters and were compared with an Al2O3-13 wt pct TiO2 coating fabricated with conventional powders. The nanostructured coatings showed a bimodal microstructure composed of fully melted regions of γ-Al2O3 and partially melted regions, while the conventional coating mostly consisted of fully melted γ-Al2O3, together with some TiO2-rich regions and unmelted Al2O3 powders. The wear test results revealed that the wear resistance of the nanostructured coatings was 3 or 4 times better than that of the conventional coating, because the preferential delamination seriously occurred along TiO2-rich regions in the conventional coating. In the nanostructured coatings, TiO2 was homogeneously dispersed inside splats and around, thereby leading to higher splat bonding strength and to better wear resistance over the conventional coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. T. Bernecki: Thermal Spray Technology, ASM INTERNATIONAL, Metals Park, OH, 1992, pp. 3–57.
2. L. Pawlowsky: The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons, New York, NY, 1995.
3. Th. Lampe, S. Eisenberg, and E.R. Cabeo: Surf. Coating Technol., 2003, vol. 174–175, pp. 1–7.10.1016/S0257-8972(03)00473-0 ↗
4. J.H. Ko, J.H. Lee, and D.B. Lee: Met. Mater. Int., 2004, vol. 10, pp. 263–68.
5. Y. Wang, S. Jiang, M. Wang, S. Wang, T.D. Xiao, and R. Strutt: Wear, 2000, vol. 237, pp. 176–85.10.1016/S0043-1648(99)00323-3 ↗
6. H.K. Kang: Met. Mater. Int., 2004, vol. 10, pp. 479–83.10.1007/BF03027352 ↗
7. L.L. Shaw, D. Goberman, R. Ren, M. Gell, S. Jing, Y. Wang, T.D. Xiao, and P.R. Strutt: Surf. Coating Technol., 2000, vol. 130, pp. 1–8.10.1016/S0257-8972(00)00673-3 ↗
8. E.H. Jordan, M. Gell, Y.H. Sohn, D. Geberman, L. Shaw, S. Jiang, M. Wang, T.D. Xiao, Y. Wang, and P. Strutt: Mater. Sci. Eng., A, 2001, vol. 301A, pp. 80–89.10.1016/S0921-5093(00)01382-4 ↗
9. M. Gell, E.H. Jordan, Y.H. Sohn, D. Goberman, L. Shaw, and T.D. Xiao: Surf. Coating Technol., 2001, vols. 146–147, pp. 48–54.10.1016/S0257-8972(01)01470-0 ↗
10. G.G. Lee and W.Y. Kim: Met. Mater. Int., 2005, vol. 11, pp. 177–81.10.1007/BF03027463 ↗
11. D. Goberman, Y.H. Shon, L. Shaw, E. Jordan, and M. Gell: Acta Mater., 2002, vol. 50, pp. 1141–52.10.1016/S1359-6454(01)00414-1 ↗
12. H. Luo, D. Goberman, L. Shaw, and M. Gell: Mater. Sci. Eng., A, 2003, vol. 346A, pp. 237–45.10.1016/S0921-5093(02)00523-3 ↗
13. P. Bansal, N.P. Padture, and A. Vasilev: Acta Mater., 2003, vol. 51, pp. 2959–70.10.1016/S1359-6454(03)00109-5 ↗
14. J. Ahn: Ph.D. Thesis, POSTECH, Pohang, Korea, 2005, pp. 1–26.
15. J. He, M. Iee, and E.J. Lavernia: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 555–64.10.1007/s11661-000-0290-0 ↗
16. M.L. Lau, H.G. Jiang, W. Nuchter, and E.J. Lavernia: Phys. Status Solidi, 1998, vol. 166, pp. 257–67.10.1002/(SICI)1521-396X(199803)166:1<257::AID-PSSA257>3.0.CO;2-J ↗
17. K. Jia and T.E. Fischer: Wear, 1996, vol. 200, pp. 206–14.10.1016/S0043-1648(96)07277-8 ↗
18. D.J. Branagan, W.D. Swank, D.C. Haggard, and J.R. Fincke: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2615–21.10.1007/s11661-001-0051-8 ↗
19. ASTM Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM G99-95a, ASTM, Philadelphia, PA, 1995.
20. R. McPherson: J. Mater. Sci. 1980, vol. 15, pp. 3141–49.10.1007/BF00550387 ↗
21. R. McPherson: Thin Solid Films, 1981, vol. 83, pp. 297–310.10.1016/0040-6090(81)90633-7 ↗
22. K. Ramachandran, V. Selvarajan, P.V. Ananthapadmanabhan, and K.P. Sreekumar: Thin Solid Films, 1998, vol. 315, pp. 144–52.10.1016/S0040-6090(97)00738-4 ↗
23. X. Wu, D. Weng, L. Xu, and H. Li: Surf. Coating Technol., 2001, vol. 145, pp. 226–32.10.1016/S0257-8972(01)01301-9 ↗
24. D.A. Rigney: Fundamentals of Friction and Wear of Materials, ASM Materials Science Seminar, ASM, Pittsburgh, PA, 1981.
25. ASM Handbook, Friction, Lubrication, and Wear Technology, ASM INTERNATIONAL, Metals Park, OH, vol. 18, 1992.
26. H.W. Jin, C.G. Park, and M.C. Kim: Scripta Mater., 1999, vol. 41, pp. 589–95.10.1016/S1359-6462(99)00201-8 ↗
27. B. Hwang, J. Ahn, and S. Lee: Metall. Mater. Trans. A, 2001, vol. 33A, pp. 2933–45.
28. I.-H. Jung and A. Pelton: “Research Report for Inco,” Teck Cominco and Dupont, Ecole Politechnique, Vancouver, Canada, 2004.
29. J. Madejski: Int. J. Heat Mass Transfer, 1976, vol. 19, pp. 1009–13.10.1016/0017-9310(76)90183-6 ↗