Different Effects of Ni and Mn on Thermodynamic and Mechanical Stabilities in Cr-Ni-Mn Austenitic Steels
Source abstract
Abstract
Thermodynamic and mechanical stabilities of austenite were investigated in Cr-Ni-Mn austenitic steels by varying the contents of Ni and Mn. Mn was more beneficial to increasing thermodynamic stability against martensitic transformation than the equivalent amount of Ni. However, the tendency for strain-induced martensite transformation was governed not by the thermodynamic stability but by stacking fault energy (SFE) which was increased more effectively by Ni than by the equivalent amount of Mn. A modified SFE equation and experimentally determined Ni equivalents may suggest a criterion for austenite stability throughout tensile deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. 1.T. Michler and J. Naumann: Int. J. Hydrogen Energy, 2010, vol. 35, pp. 1485-92.10.1016/j.ijhydene.2009.10.050 ↗
2. 2.T. Oshima, Y. Habara and K. Kuroda: ISIJ Int., 2007, vol. 47, pp. 359-64.10.2355/isijinternational.47.359 ↗
3. 3.M.P. Phaniraj, H.J. Kim, J.Y. Suh, J.H. Shim, S.J. Park and T.H. Lee: Int. J. Hydrogen Energy, 2015, vol. 40, pp. 13635-42.10.1016/j.ijhydene.2015.07.163 ↗
4. 4.T.H. Lee, E.J. Shin, C.S. Oh, H.Y. Ha and S.J. Kim: Acta Mater., 2010, vol. 58, pp. 3173-86.10.1016/j.actamat.2010.01.056 ↗
5. 5.R. Ayer, C.F. Klein and C.N. Marzinsky: Metall. Trans. A, 1992, vol. 23, pp. 2455-67.10.1007/BF02658049 ↗
6. 6.B.C. Hwang, T.H. Lee, S.J. Park, C.S. Oh and S.J. Kim: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7257-66.10.1016/j.msea.2011.06.025 ↗
7. 7.T. Hirayama and M. Ogirima: J. Jpn. Inst. Met., 1970, vol. 34, pp. 507-10.10.2320/jinstmet1952.34.5_507 ↗
8. 8.L. Zhang, M. Wen, M. Imade, S. Fukuyama and K. Yokogawa: Acta Mater., 2008, vol. 56, pp. 3414-21.10.1016/j.actamat.2008.03.022 ↗
9. 9.C. Zhou, Y. Hong, L. Zhang, B. An, J. Zheng and X. Chen: Int. J. Hydrogen Energy, 2016, vol. 41, pp. 13777-85.10.1016/j.ijhydene.2016.06.100 ↗
10. 10.J.H. Kang, H.S. Noh, K.M. Kim, S.C. Lee and S.J. Kim: J. Alloys Compd., 2017, vol. 696, pp. 869-74.10.1016/j.jallcom.2016.12.061 ↗
11. 11.M. Sanga, N. Yukawa and T. Ishikawa: J. Jpn. Soc. Technol. Plast., 2000, vol. 41, pp. 64-68.
12. 12.T. Oshima, Y. Habara and K. Kuroda: Tetsu-to-Hagane, 2007, vol. 93, pp. 544-51.10.2355/tetsutohagane.93.544 ↗
13. 13.T. Takemoto, Y. Murata and T. Tanaka: ISIJ Int., 1990, vol. 30, pp. 608-14.10.2355/isijinternational.30.608 ↗
14. 14.Y. Tian, O.I. Gorbatov, A. Borgenstam, A.V. Ruban and P. Hedström: Metall. Mater. Trans. A, 2017, vol. 48, pp. 1-7.10.1007/s11661-016-3839-2 ↗
15. 15.A. Saeed-Akbari, J. Imlau, U. Prahl and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40, pp. 3076-90.10.1007/s11661-009-0050-8 ↗
16. 16.T. Michler, K. Berreth, J. Naumann and E. Sattler: Int. J. Hydrogen Energy, 2012, vol. 37, pp. 3567-72.10.1016/j.ijhydene.2011.11.080 ↗
17. 17.G.B. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107-18.10.1016/0022-5088(72)90173-7 ↗
18. 18.D. Fahr: Metall. Trans., 1971, vol. 2, pp. 1883-92.10.1007/BF02913420 ↗
19. 19.T. Angel: J. Iron Steel Inst., 1954, vol. 177, pp. 165-74.
20. 20.I. Tamura: Met. Sci., 1982, vol. 16, pp. 245-53.10.1179/030634582790427316 ↗
21. 21.M. Martín, S. Weber and W. Theisen: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 14887-95.10.1016/j.ijhydene.2013.08.133 ↗
22. 22.T. Masumura, N. Nakada, T. Tsuchiyama, S. Takaki, T. Koyano and K. Adachi: Acta Mater., 2015, vol. 84, pp. 330-38.10.1016/j.actamat.2014.10.041 ↗
23. 23.K. Nohara, Y. Ono and N. Ohashi: Tetsu-to-Hagane, 1977, vol. 63, pp. 772-82.10.2355/tetsutohagane1955.63.5_772 ↗
24. 24.H. Fujita and S. Ueda: Acta Metall., 1972, vol. 20, pp. 759-67.10.1016/0001-6160(72)90104-6 ↗
25. 25.E.H. Lee, M.H. Yoo, T.S. Byun, J.D. Hunn, K. Farrell and L.K. Mansur: Acta Mater., 2001, vol. 49, pp. 3277-87.10.1016/S1359-6454(01)00194-X ↗
26. 26.F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 391-400.10.1007/BF02642042 ↗
27. 27.G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1897-904.
28. 28.C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 8, pp. 1901-06.10.1007/BF02646563 ↗
29. 29.J.C. Li, W. Zheng and Q. Jiang: Mater. Lett., 1999, vol. 38, pp. 275-77.10.1016/S0167-577X(98)00172-4 ↗
30. 30.R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6, pp. 1345-51.10.1007/BF02641927 ↗
31. 31.M. Ojima, Y. Adachi, Y. Tomota, Y. Katada, Y. Kaneko, K. Kuroda and H. Saka: Steel Res. Int., 2009, vol. 80, pp. 477-81.
32. 32.L. Mosecker and A. Saeed-Akbari: Sci. Technol. Adv. Mater., 2013, vol. 14, p. 033001.10.1088/1468-6996/14/3/033001 ↗
33. 33.L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99-107.10.1016/0025-5416(77)90093-3 ↗
34. 34.M. Martin, S. Weber, W. Theisen, T. Michler and J. Naumann: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 15888-98.10.1016/j.ijhydene.2011.09.013 ↗
35. 35.S. Allain, J.P. Chateau, O. Bouaziz, S. Migot and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 158-62.10.1016/j.msea.2004.01.059 ↗