journal article·2018-04

Influence of Annealing on Microstructure and Mechanical Properties of Refractory CoCrMoNbTi0.4 High-Entropy Alloy

Mina Zhang, Xianglin Zhou, Wuzhi Zhu, Jinghao Li

Publisher page

Abstract

A novel refractory CoCrMoNbTi0.4 high-entropy alloy (HEA) was prepared via vacuum arc melting. After annealing treatment at different temperatures, the microstructure evolution, phase stability, and mechanical properties of the alloy were investigated. The alloy was composed of two primary body-centered cubic structures (BCC1 and BCC2) and a small amount of (Co, Cr)2Nb-type Laves phase under different annealing conditions. The microhardness and compressive strength of the heat-treated alloy was significantly enhanced by the solid-solution strengthening of the BCC phase matrix and newborn Laves phase. Especially, the alloy annealed at 1473 K (1200 °C) achieved the maximum hardness and compressive strength values of 959 ± 2 HV0.5 and 1790 MPa, respectively, owing to the enhanced volume fraction of the dispersed Laves phase. In particular, the HEAs exhibited promising high-temperature mechanical performance, when heated to an elevated temperature of 1473 K (1200 °C), with a compressive fracture strength higher than 580 MPa without fracture at a strain of more than 20 pct. This study suggests that the present refractory HEAs have immense potential for engineering applications as a new class of high-temperature structural materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299-303.10.1002/adem.200300567 ↗
2. Y. Dong, K.Y. Zhou, Y.P. Lu, X.X. Gao, T.M. Wang, and T.J. Li: Mater. Des., 2014, vol. 57, pp. 67-72.10.1016/j.matdes.2013.12.048 ↗
3. L. Jiang, Z.Q. Cao, J.C. Jie, J.J. Zhang, Y.P. Lu, T.M. Wang, and T.J. Li: J. Alloy. Compd., 2015, vol. 649, pp. 585-590.10.1016/j.jallcom.2015.07.185 ↗
4. C. Li, Y.F. Xue, M.T. Hua, T.Q. Cao, L.L. Ma, and L. Wang: Mater. Des., 2016, vol. 90, pp. 601-609.10.1016/j.matdes.2015.11.013 ↗
5. D.C. Ma, M.J. Yao, K.G. Pradeep, C.C. Tasan, H. Springer, and D. Raabe: Acta. Mater., 2015, vol. 98, pp. 288-296.10.1016/j.actamat.2015.07.030 ↗
6. M.R. Chen, S.J. Lin, J.W. Yeh, S. Chen, Y.S. Huang, and M.H. Chuang: Metall. Mater. Trans., 2006, vol. 37, pp. 1363-1369.10.1007/s11661-006-0081-3 ↗
7. M.H. Chuang, M.H. Tsai, W.R. Wang, S.J. Lin, and J.W. Yeh: Acta. Mater., 2011, vol. 59, pp. 6308-6317.10.1016/j.actamat.2011.06.041 ↗
8. Z.T. Zhang, Eugen Axinte, W.J. Ge, C.Y. Shang, and Y. Wang: Mater. Des., 2016, vol. 108, pp. 106-113.10.1016/j.matdes.2016.06.100 ↗
9. O.N. Senkov and C.F. Woodward: Mater. Sci. Eng. A., 2011, vol. 529, pp. 311-320.10.1016/j.msea.2011.09.033 ↗
10. A. Poulia, E. Georgatis, A. Lekatou, and A.E. Karantzalis: Int. J. Refract. Met. Hard. Mater., 2016, vol. 57, pp. 50-63.10.1016/j.ijrmhm.2016.02.006 ↗
11. Mitsuharu Todai, Takeshi Nagase, Takao Hori, Aira Matsugaki, Aiko Sekita, and Takayoshi Nakano: Scripta. Mater., 2017, vol. 129, pp. 65-68.10.1016/j.scriptamat.2016.10.028 ↗
12. O.N. Senkov, G.B. Wilks, J.M. Scott, and D.B. Miracle: Intermetallics., 2011, vol. 19, pp. 698-706.10.1016/j.intermet.2011.01.004 ↗
13. O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, and P.K. Liaw: Intermetallics., 2010, vol. 18, pp. 1758-1765.10.1016/j.intermet.2010.05.014 ↗
14. O. N. Senkov, J. M. Scott, S. V. Senkova, F. Meisenkothen, D. B. Miracle, and C. F. Woodward: J. Mater. Sci., 2012, vol. 47, pp. 4062-4074.10.1007/s10853-012-6260-2 ↗
15. C.C. Juan, K.K. Tseng, W.L. Hsu, M.H. Tsai, C.W. Tsai, C.M. Lin, S.K. Chen, S.J. Lin, and J.W. Yeh: Mater. Lett., 2016, vol. 175, pp. 284-287.10.1016/j.matlet.2016.03.133 ↗
16. Z.D. Han, N. Chen, S.F. Zhao, L.W. Fan, G.N. Yang, Y. Shao, and K.F. Yao: Intermetallics., 2017, vol. 84, pp. 153-157.10.1016/j.intermet.2017.01.007 ↗
17. Y.D. Wu, Y.H. Cai, X.H. Chen, T. Wang, J.J. Si, L. Wang, Y.D. Wang, and X.D. Hui: Mater. Des., 2015, vol. 83, pp. 651-660.10.1016/j.matdes.2015.06.072 ↗
18. H. Chen, A. Kauffmann, B. Gorr, D. Schliephake, C. Seemüller, J.N. Wagner, H.-J. Christ, and M. Heilmaier: J. Alloy. Compd., 2016, vol. 661, pp. 206-215.10.1016/j.jallcom.2015.11.050 ↗
19. A.E. Karantzalis, A. Poulia, E. Georgatis, and D. Petroglou: Scripta. Mater., 2017, vol. 131, pp. 51-54.10.1016/j.scriptamat.2017.01.004 ↗
20. N.D. Stepanov, N.Yu. Yurchenko, E.S. Panina, M.A. Tikhonovsky. and S.V. Zherebtsov: Mater. Lett., 2017, vol. 188, pp. 162-164.10.1016/j.matlet.2016.11.030 ↗
21. O.N. Senkov, S.V. Senkova, D.B. Miracle, and C. Woodward: Mater. Sci. Eng. A., 2013, vol. 565, pp. 51-62.10.1016/j.msea.2012.12.018 ↗
22. O.N. Senkov, S.V. Senkova, C. Woodward, and D.B. Miracle: Acta. Mater., 2013, vol. 61, pp. 1545-1557.10.1016/j.actamat.2012.11.032 ↗
23. N.Yu. Yurchenko, N.D. Stepanov, D.G. Shaysultanov, M.A. Tikhonovsky, and G.A. Salishchev: Mater. Charact., 2016, vol. 121, pp. 125-134.10.1016/j.matchar.2016.09.039 ↗
24. N.D. Stepanov, N. Yu Yurchenko, D.V. Skibin, M.A. Tikhonovsky, and G.A. Salishchev: J. Alloy. Compd., 2015, vol. 652, pp. 266-280.10.1016/j.jallcom.2015.08.224 ↗
25. M.N. Zhang, X.L. Zhou, and J.H. Li: J. Mater. Eng. Perform., 2017, vol. 26, pp. 3657-3665.10.1007/s11665-017-2799-z ↗
26. H. Zhang, Y. Pan, and Y.Z. He: Acta. Metall. Sin., 2011, vol. 47, pp. 1075-1079.
27. X Yang, Y Zhang (2012) Mater. Chem. Phys. 132:233-238.10.1016/j.matchemphys.2011.11.021 ↗
28. S. Guo, and C. T. Liu: Prog. Nat. Sci-Mater., 2011, vol. 21, pp. 433-436.10.1016/S1002-0071(12)60080-X ↗
29. Akira Takeuchi, and Akihisa Inoue: Mater. Trans., 2005, vol. 46, pp. 2817-2829.10.2320/matertrans.46.2817 ↗
30. J.H. Pi, Y. Pan, L. Zhang, and H. Zhang: J. Alloy. Compd., 2011, vol. 509, pp. 5641-5645.10.1016/j.jallcom.2011.02.108 ↗
31. Z.J. Wang and S. Guo, C.T. Liu: JOM., 2014, vol. 66, pp. 1966-1972.10.1007/s11837-014-0953-8 ↗
32. Y. Dong, Y.P. Lu, L. Jiang, T.M. Wang, and T.J. Li: Intermetallics., 2014, vol. 52, pp. 105-109.10.1016/j.intermet.2014.04.001 ↗
33. N. Yurchenko, N. Stepanov, and G. Salishchev: Maters. Sci. Tech-lond., 2017, vol. 33, pp. 17-22.10.1080/02670836.2016.1153277 ↗
34. F. He, Z.J. Wang, P. Cheng, Q. Wang, J.J. Li, Y.Y. Dang, J.C. Wang, and C.T. Liu: J. Alloy. Compd., 2016, vol. 656, pp. 284-289.10.1016/j.jallcom.2015.09.153 ↗
35. W.H. Liu, J.Y. He, H.L. Huang, and H. Wang, Z.P. Lu, C.T. Liu: Intermetallics., 2015, vol. 60, pp. 1-8.10.1016/j.intermet.2015.01.004 ↗
36. L. Jiang, Y.P. Lu, W. Wu, Z.Q. Cao, and T.J. Li: J. Mater. Sci. Technol., 2016, vol. 32, pp. 245-250.10.1016/j.jmst.2015.08.006 ↗
37. M.N. Zhang, X.L. Zhou, X.N. Yu, and J.H. Li: Surf. Coat. Tech., 2017, vol. 311, pp. 321-329.10.1016/j.surfcoat.2017.01.012 ↗
38. T.T. Shun, L.Y. Chang, and M.H. Shiu: Mater. Sci. Eng. A., 2012, vol. 556, pp. 170-174.10.1016/j.msea.2012.06.075 ↗
39. Y. Dong, Y.P. Lu, J.R. Kong, J.J. Zhang, and T.J. Li: J. Alloy. Compd., 2013, vol. 573, pp. 96-101.10.1016/j.jallcom.2013.03.253 ↗
40. N.N. Guo, L. Wang n, L.S. Luo, X.Z. Li, R.R. Chen, Y.Q. Su n, J.J. Guo, and H.Z. Fu: Mater. Sci. Eng. A., 2016, vol. 651, pp. 698-707.10.1016/j.msea.2015.10.113 ↗
41. Y. Liu, Y. Zhang, H. Zhang, N.J. Wang, X. Chen, H.W. Zhang, and Y.X. Li: J. Alloy. Compd., 2017, vol. 694, pp. 869-876.10.1016/j.jallcom.2016.10.014 ↗
42. C.C. Juan, M.H. Tsai, C.W. Tsai, C.M. Lin, W.R. Wang, C.C. Yang, S.K. Chen, S.J. Lin, and J.W. Yeh: Intermetallics., 2015, vol. 62, pp. 76-83.10.1016/j.intermet.2015.03.013 ↗
43. D.B. Miracle, and O.N. Senkov: Acta. Mater., 2017, vol. 122, pp. 448-511.10.1016/j.actamat.2016.08.081 ↗