Texture Development and Material Flow Behavior During Refill Friction Stir Spot Welding of AlMgSc
Source abstract
Abstract
The microstructural evolution during refill friction stir spot welding of an AlMgSc alloy was studied. The primary texture that developed in all regions, with the exception of the weld center, was determined to be 〈110〉 fibers and interpreted as a simple shear texture with the 〈110〉 direction aligned with the shear direction. The material flow is mainly driven by two components: the simple shear acting on the horizontal plane causing an inward-directed spiral flow and the extrusion acting on the vertical plane causing an upward-directed or downward-directed flow. Under such a complex material flow, the weld center, which is subjected to minimal local strain, is the least recrystallized. In addition to the geometric effects of strain and grain subdivision, thermally activated high-angle grain boundary migration, particularly continuous dynamic recrystallization, drives the formation of refined grains in the stirred zone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. S. Fukumoto, I. Lum, E. Biro, D. R. Boomer, and Y. Zhou: Weld. J., 2003, vol. 82, pp. 307S–312S.
2. S. Lathabai, M. J. Painter, G. M. D. Cantin, and V. K. Tyagi: Scr. Mater., 2006, vol. 55, pp. 899-902.10.1016/j.scriptamat.2006.07.046 ↗
3. Q. Yang, S. Mironov, Y. S. Sato, and K. Okamoto: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4389-4398.10.1016/j.msea.2010.03.082 ↗
4. H. Badarinarayan, F. Hunt, and K. Okamoto: Friction stir spot welding, in: R.S. Mishra, M.W. Mahoney (Eds.), Friction Stir Welding and Processing, ASM International, Ohio, 2007, pp. 235-272.
5. C. Schilling, and J. dos Santos: European patent EP 1230062 B1 (WO 2001/036144), May 17, 2006.
6. T. Rosendo, B. Parra, M. A. D. Tier, A. A. M. da Silva, J. F. dos Santos, T. R. Strohaecker, and N. G. Alcantara: Mater. Des., 2011, vol. 32, pp. 1094-1100.10.1016/j.matdes.2010.11.017 ↗
7. G. Pieta, J. dos Santos, T. R. Strohaecker, and T. Clarke: Mater. Manuf. Processes, 2013, vol. 29, pp. 934-940.10.1080/10426914.2013.811727 ↗
8. L. C. Campanelli, U. F. H. Suhuddin, A. I. S. Antonialli, J. F. dos Santos, N. G. Alcantara, and C. Bolfarini: J. Mater. Process. Technol., 2013, vol. 213, pp. 515-521.10.1016/j.jmatprotec.2012.11.002 ↗
9. M. D. Tier, T. S. Rosendo, J. F. dos Santos, N. Huber, J. A. Mazzaferro, C. P. Mazzaferro, and T. R. Strohaecker: J. Mater. Process. Technol., 2013, vol. 213, pp. 997-1005.10.1016/j.jmatprotec.2012.12.009 ↗
10. Y. Q. Zhao, H. J. Liu, Z. Lin, S. X. Chen, and J. C. Hou: Sci. Technol. Weld. Joining, 2014, vol. 19, pp. 617-622.10.1179/1362171814Y.0000000235 ↗
11. U. F. H. Suhuddin, V. Fischer, and J. F. dos Santos: Scr. Mater., 2013, vol. 68, pp. 87-90.10.1016/j.scriptamat.2012.09.008 ↗
12. J. Shen, U. F. H. Suhuddin, M. E. B. Cardillo, and J. F. dos Santos: Appl. Phys. Lett., 2014, vol. 104, p. 4.
13. J. Shen, M.E.B. Cardillo, and J.F.d. Santos: In 10th International Symposium on Friction Stir Welding, 2014 CD-ROM Beijing, P.R. China.
14. A. H. Plaine, A. R. Gonzalez, U. F. H. Suhuddin, J. F. dos Santos, and N. G. Alcantara: Mater. Des., 2015, vol. 83, pp. 36-41.10.1016/j.matdes.2015.05.082 ↗
15. R. W. Fonda and K. E. Knipling: Sci. Technol. Weld. Joining, 2011, vol. 16, pp. 288-294.10.1179/1362171811Y.0000000010 ↗
16. R. W. Fonda, J. F. Bingert, and K. J. Colligan: Scr. Mater., 2004, vol. 51, pp. 243-248.10.1016/j.scriptamat.2004.04.017 ↗
17. D. P. Field, T. W. Nelson, Y. Hovanski, and K. V. Jata: Metall. Trans. A, 2001, vol. 32, pp. 2869-2877.10.1007/s11661-001-1037-2 ↗
18. S. H. C. Park, Y. S. Sato, and H. Kokawa: Metall. Metall. Trans. A, 2003, vol. 34A, pp. 987-994.10.1007/s11661-003-0228-4 ↗
19. J. Shen, F. F. Wang, U. F. H. Suhuddin, S. Y. Hu, W. Y. Li, and J. F. Dos Santos: Metall. Trans. A, 2015, vol. 46A, pp. 2809-2813.10.1007/s11661-015-2948-7 ↗
20. R. S. Mishra and Z. Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
21. Y. S. Sato, F. Yamashita, Y. Sugiura, S. H. C. Park, and H. Kokawa: Scr. Mater., 2004, vol. 50, pp. 365-369.10.1016/j.scriptamat.2003.10.008 ↗
22. K. Okayasu, H. Takekoshi, and H. Fukutomi: Mater. Trans., 2007, vol. 48, pp. 2002-07.10.2320/matertrans.L-MRA2007869 ↗
23. S. Li, I. J. Beyerlein, and M. A. M. Bourke: Mater. Sci. Eng. A, 2005, vol. 394, pp. 66-77.10.1016/j.msea.2004.11.032 ↗
24. G. R. Canova, U. F. Kocks, and J. J. Jonas: Acta Metall., 1984, vol. 32, pp. 211-226.10.1016/0001-6160(84)90050-6 ↗
25. L. S. Toth, K. W. Neale, and J. J. Jonas: Acta Metall., 1989, vol. 37, pp. 2197-2210.10.1016/0001-6160(89)90145-4 ↗
26. R. W. Fonda and J. F. Bingert: Scr. Mater., 2007, vol. 57, pp. 1052-1055.10.1016/j.scriptamat.2007.06.068 ↗
27. V. I. Elagin, V. V. Zakharov, and T. D. Rostova: Met Sci Heat Treat+ 1992, vol. 34, pp. 37-45.10.1007/BF00768707 ↗
28. V. G. Davydov, T. D. Rostova, V. V. Zakharov, Y. A. Filatov, and V. I. Yelagin: Mater. Sci. Eng. A, 2000, vol. 280, pp. 30-36.10.1016/S0921-5093(99)00652-8 ↗
29. V. V. Zakharov: Met. Sci. Heat Treat., 2012, vol. 53, pp. 414-419.10.1007/s11041-012-9408-4 ↗
30. P. B. Prangnell and C. P. Heason: Acta Metall., 2005, vol. 53, pp. 3179-3192.
31. H. F. Huang, F. Jiang, J. Zhou, L. L. Wei, J. P. Qu, and L. L. Liu: J. Mater. Eng. Perform., 2015, vol. 24, pp. 4244-4252.10.1007/s11665-015-1748-y ↗
32. P. Wagner, O. Engler, and K. Lucke: Textures Microstruct., 1991, vol. 14, pp. 927-932.10.1155/TSM.14-18.927 ↗
33. Y. Nakayama and K. Morii: Acta Metall., 1987, vol. 35, pp. 1747-1755.10.1016/0001-6160(87)90120-9 ↗
34. A. Duckham, R. D. Knutsen, and O. Engler: Acta Metall., 2001, vol. 49, pp. 2739-2749.
35. F. Zhao, L. Wang, D. Fan, B. X. Bie, X. M. Zhou, T. Suo, Y. L. Li, M. W. Chen, C. L. Liu, M. L. Qi, M. H. Zhu, and S. N. Luo: Phys. Rev. Lett., 2016, vol. 116:075501.10.1103/PhysRevLett.116.075501 ↗
36. S. J. Lillywhite, P. B. Prangnell, and F. J. Humphreys: Mater. Sci. Technol., 2000, vol. 16, pp. 1112-1120.10.1179/026708300101507037 ↗
37. M. R. Drury and F. J. Humphreys: Acta Metall., 1986, vol. 34, pp. 2259-2271.10.1016/0001-6160(86)90171-9 ↗