Microstructure, Texture, and Superplasticity of a Fine-Grained Mg-Gd-Zr Alloy Processed by Equal-Channel Angular Pressing
Source abstract
Abstract
There are limited reports to date on the microstructure and superplasticity of the Mg-Gd alloys after processing by equal-channel angular pressing (ECAP). Accordingly, the effects of ECAP temperature from 473 K to 723 K (200 °C to 450 °C) and number of passes (2, 4, and 8) on the microstructure and texture of an extruded Mg-5Gd-0.4Zr (GW50) alloy were investigated by scanning electron microscope, transmission electron microscope, and electron backscattered diffraction. The results show that the optimum ECAP temperature is 623 K (350 °C). Higher temperatures give extensive grain growth and the material has insufficient formability at lower temperatures. The results show also that the alloy exhibits no further grain refinement after four ECAP passes and there is slight grain growth at 8 ECAP passes. Samples were processed by four passes at 623 K (350 °C) and then subjected to shear punch testing. The results confirm the occurrence of superplastic behavior at 723 K (450 °C) with a maximum strain rate sensitivity index of ~0.47 and an activation energy of ~110 kJ mol−1. The results are consistent with the occurrence of flow by grain boundary sliding in the superplastic region.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng., 2001, vol. 302A, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. M. Kawasaki and T.G. Langdon: J. Mater. Sci., 2016, vol. 51, pp. 19–33.10.1007/s10853-015-9176-9 ↗
3. J. Cizek, I. Prochazka, B. Smola, I. Stulikova, R. Kuzel, Z. Matej, V. Cherkaska, R.K. Islamgaliev and O. Kulyasova: Mater. Sci. Eng., 2007, vol. 462A, pp. 121–26.10.1016/j.msea.2006.01.177 ↗
4. R. Alizadeh, R. Mahmudi, A. H. W. Ngan and T. G. Langdon: J. Mater. Sci., 2015, 50, pp. 4940–51.10.1007/s10853-015-9041-x ↗
5. X. Zhang, L. Li, Y. Deng, and N. Zhou: J. Alloys Compd., 2009, vol. 481, pp. 296–300.10.1016/j.jallcom.2009.03.166 ↗
6. L. Li, X. Zhang, Y. Deng and C. Tang: J. Alloys Compd., 2009, vol. 485, pp. 295–99.10.1016/j.jallcom.2009.06.113 ↗
7. D.J. Li, Q.D. Wang, J.J. Blandin, M. Suery, J. Dong and X.Q. Zeng: Mater. Sci. Eng., 2009, vol. 526A, pp. 150–55.10.1016/j.msea.2009.07.015 ↗
8. L. Li, X. Zhang, C. Tang, Y. Deng and N. Zhou: Mater. Sci. Eng., 2010, vol. 527A, pp. 1266–74.10.1016/j.msea.2009.11.012 ↗
9. Q. Yang, B.L. Xiao and Z.Y. Ma: J. Alloys Compd., 2013, vol. 551, pp. 61–66.10.1016/j.jallcom.2012.10.002 ↗
10. Q. Yang, B.L. Xiao, Q. Zhang, M.Y. Zheng and Z.Y. Ma: Scr. Mater., 2013, vol. 69, pp. 801–04.10.1016/j.scriptamat.2013.09.001 ↗
11. R. Alizadeh, R. Mahmudi and T.G. Langdon: J. Mater. Res. Technol., 2014, 3, pp. 228–32.10.1016/j.jmrt.2014.04.004 ↗
12. A. Movahedi-Rad, R. Mahmudi, G.H. Wu and H.R. Jafari-Nodooshan: J. Alloys Compd., 2015, vol. 626, pp. 309–13.10.1016/j.jallcom.2014.12.036 ↗
13. M. Sarebanzadeh, R. Roumina, R. Mahmudi, G.H. Wu and H.R. Jafari-Nodooshan: Mater. Sci. Eng., 2015, vol. 646A, pp. 249–53.10.1016/j.msea.2015.08.074 ↗
14. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, Y. Huang and T.G. Langdon: Mater. Sci. Eng., 2016, vol. 651A, pp. 786–94.10.1016/j.msea.2015.10.094 ↗
15. T.G. Langdon: J. Mater. Sci., 2009, vol. 44, pp. 5998–6010.10.1007/s10853-009-3780-5 ↗
16. F. Zhang, K. Zhang, C. Tan, X. Yu, H. Ma, F. Wang and H. Cai: Trans. Nonferrous Met. China, 2011, vol. 21, pp. 2140–46.10.1016/S1003-6326(11)60986-2 ↗
17. J. Zhang, Z. Kang and L. Zhou: Mater. Sci. Eng., 2015, vol. 647A, pp. 184–90.10.1016/j.msea.2015.09.005 ↗
18. R. Mahmudi, R. Alizadeh and A.R. Geranmayeh: Scr. Mater., 2011, vol. 64, pp. 521–24.10.1016/j.scriptamat.2010.11.030 ↗
19. R. Mahmudi, H. Mahjoubi and P. Mehraram: Int. J. Mod. Phys. B, 2008, 22, pp. 2823–32.10.1142/S021797920804764X ↗
20. R. Mahmudi, R. Alizadeh and S. Azhari: Mater. Lett., 2013, vol. 97, pp. 44–46.10.1016/j.matlet.2013.01.078 ↗
21. M. Karami and R. Mahmudi: Mater. Sci. Eng., 2013, vol. 576A, pp. 156–59.10.1016/j.msea.2013.03.080 ↗
22. N. Fakhar, F. Fereshteh-Saniee and R. Mahmudi: Mater. Des., 2015, vol. 85, pp. 342–48.10.1016/j.matdes.2015.06.158 ↗
23. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto and T.G. Langdon: Mater. Sci. Eng., 1998, vol. 257A, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
24. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto and T.G. Langdon: Scr. Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
25. R. Alizadeh and R. Mahmudi: Mater. Sci. Eng., 2010, vol. 527A, pp. 3975–83.10.1016/j.msea.2010.03.007 ↗
26. G.L. Hankin, M.B. Toloczko, K.I. Johnson, M.A. Khaleel, M.L. Hamilton, F.A. Garner, R.W. Davies and R.G. Faulkner: ASTM STP 1366, 2000, pp. 1018–28.
27. W.J. Park, H. Park, D.H. Kim and N.J. Kim: Mater. Sci. Eng., 1994, 179, pp. 637–40.10.1016/0921-5093(94)90283-6 ↗
28. P. Vostry, B. Smola, I. Stulikova, F. Von Buch and B.L. Mordike: Phys. Status Solidi, 1999, 175A, pp. 491–500.10.1002/(SICI)1521-396X(199910)175:2<491::AID-PSSA491>3.0.CO;2-F ↗
29. D. Li, Q. Wang and W. Ding: Mater. Sci. Eng., 2006, 428A, pp. 295–300.10.1016/j.msea.2006.05.011 ↗
30. S.M. He, X.Q. Zeng, L.M. Peng, X. Gao, J.F. Nie and W.J. Ding: J. Alloy Compd., 2007, vol. 427, pp. 316–23.10.1016/j.jallcom.2006.03.015 ↗
31. Z. Yang, Z.H. Wang, H.B. Duan, Y.C. Guo, P.H. Gao and J.P. Li: Mater. Sci. Eng., 2015, vol. 631A, pp. 160–65.10.1016/j.msea.2015.02.041 ↗
32. K.Y. Zheng, J. Dong, X.Q. Zeng and W.J. Ding: Mater. Sci. Technol., 2008, vol. 24, pp. 320–26.10.1179/174328408X275991 ↗
33. Y. Yang, L. Peng, P. Fu, B. Hu and W. Ding: J. Alloys Compd., 2009, vol. 485, pp. 245–48.10.1016/j.jallcom.2009.06.040 ↗
34. Q. Peng, Y. Huang, J. Meng, Y. Li and K.U. Kainer: Intermetallics, 2011, vol. 19, pp. 382–89.10.1016/j.intermet.2010.11.001 ↗
35. S.M. Zhu, J.F. Nie, M.A. Gibson and M.A. Easton: Scri. Mater., 2014, vol. 77, 21–24.10.1016/j.scriptamat.2014.01.007 ↗
36. ASM Handbook, Alloy Phase Diagrams, vol. 3, ASM International, Materials Park, 1992.
37. R.B. Figueiredo and T.G. Langdon: J. Mater. Sci., 2008, vol. 43, pp. 7366–71.10.1007/s10853-008-2846-0 ↗
38. Y. Radi and R. Mahmudi: Mater. Sci. Eng., 2010, vol. 527A, pp. 2764–71.10.1016/j.msea.2010.01.029 ↗
39. C. Xu, M.Y. Zheng, S.W. Xu, K. Wu, E.D. Wang, S. Kamado, G.J. Wang and X.Y. Lu, Mater. Sci. Eng., 2012, vol. 547A, pp. 93–98.10.1016/j.msea.2012.03.087 ↗
40. S.K. Das, Y.B. Kang, T. Ha and I.H. Jung: Acta Mater., 2014, vol. 71, pp. 164–75.10.1016/j.actamat.2014.02.029 ↗
41. R. Alizadeh, R. Mahmudi, A.H.W. Ngan and T.G. Langdon: Adv. Eng. Mater., 2016, vol. 18, pp. 1044–49.10.1002/adem.201500516 ↗
42. S.S. Vagarali and T.G. Langdon: Acta Met., 1981, vol. 29, pp. 1969–82.10.1016/0001-6160(81)90034-1 ↗
43. N. Stanford: Mater. Sci. Eng., 2013, vol. 565A, pp. 469–75.10.1016/j.msea.2012.10.084 ↗
44. T. Mukai, M. Yamanoi, H. Watanabe and K. Higashi: Scr. Mater., 2001, vol. 45, pp. 89–94.10.1016/S1359-6462(01)00996-4 ↗
45. S.M. Masoudpanah and R. Mahmudi: Mater. Sci. Eng., 2010, vol. 527A, pp. 3685–89.10.1016/j.msea.2010.02.065 ↗
46. J.P. Hadorn, K. Hantzsche, S. Yi, J. Bohlen, D. Letzig and S.R. Agnew: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1363–75.10.1007/s11661-011-1018-z ↗
47. R.E. Smallman and A.H.W. Ngan: Modern Physical Metallurgy, Elsevier, New York 2014, p. 437.
48. T.G. Langdon: Mater. Sci. Eng., 1994, vol. 174A, pp. 225–30.10.1016/0921-5093(94)91092-8 ↗
49. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
50. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, U.K., 1982.