journal article·2016-06

Effect of Austenite Stability on Microstructural Evolution and Tensile Properties in Intercritically Annealed Medium-Mn Lightweight Steels

Hyejin Song, Seok Su Sohn, Jai-Hyun Kwak, Byeong-Joo Lee, Sunghak Lee

Publisher page

Abstract

The microstructural evolution with varying intercritical-annealing temperatures of medium-Mn (α + γ) duplex lightweight steels and its effects on tensile properties were investigated in relation to the stability of austenite. The size and volume fraction of austenite grains increased as the annealing temperature increased from 1123 K to 1173 K (850 °C to 900 °C), which corresponded with the thermodynamic calculation data. When the annealing temperature increased further to 1223 K (950 °C), the size and volume fraction were reduced by the formation of athermal α′-martensite during the cooling because the thermal stability of austenite deteriorated as a result of the decrease in C and Mn contents. In order to obtain the best combination of strength and ductility by a transformation-induced plasticity (TRIP) mechanism, an appropriate mechanical stability of austenite was needed and could be achieved when fine austenite grains (size: 1.4 μm, volume fraction: 0.26) were homogenously distributed in the ferrite matrix, as in the 1123 K (850 °C)—annealed steel. This best combination was attributed to the requirement of sufficient deformation for TRIP and the formation of many deformation bands at ferrite grains in both austenite and ferrite bands. Since this medium-Mn lightweight steel has excellent tensile properties as well as reduced alloying costs and weight savings, it holds promise for new automotive applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. A. Mayyas, A. Qattawi, M. Omar, and D. Shan: Renewable Sustainable Energy Rev., 2012, vol. 16, pp. 1845–62.10.1016/j.rser.2012.01.012 ↗
2. R. Kuziak, R. Kawalla, and S. Waengler: Arch. Civ. Mech. Eng., 2008, vol. 8, pp. 103–17.10.1016/S1644-9665(12)60197-6 ↗
3. S.W. Hwang, J.H. Ji, E.G. Lee, and K.-T. Park: Mater. Sci. Eng., 2011, vol. A528, pp. 5196–5203.10.1016/j.msea.2011.03.045 ↗
4. C.-H. Seo, K.H. Kwon, K. Choi, K.-H. Kim, J.H. Kwak, S. Lee, and N.J. Kim: Scripta Mater., 2012, vol. 66, pp. 519–22.10.1016/j.scriptamat.2011.12.026 ↗
5. S.-J. Park, B. Hwang, K.H. Lee, T.-H. Lee, D.-W. Suh, and H.N. Han: Scripta Mater., 2013, vol. 68, pp. 365–69.10.1016/j.scriptamat.2012.09.030 ↗
6. D.-W. Suh, S.-J. Park, T.-H. Lee, C.-S. Oh, and S.-J. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 397–408.10.1007/s11661-009-0124-7 ↗
7. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99–107.10.1016/0025-5416(77)90093-3 ↗
8. H.W. Zhang, Z.K. Hei, G. Liu, J. Lu, and K. Lu: Acta Mater., 2013, vol. 51, pp. 1871–81.10.1016/S1359-6454(02)00594-3 ↗
9. A. Dumay, J.-P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng., 2008, vol. A483–A484, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
10. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
11. T. Sahraoui, M. Hadji, and M. Yahi: Mater. Sci. Eng., 2009, vol. A523, pp. 271–76.10.1016/j.msea.2009.06.022 ↗
12. J.E. Jung, J. Park, J.-S. Kim, J.B. Jeon, S.K. Kim, and Y.W. Chang: Metall. Mater. Int., 2014, vol. 20, pp. 27–34.10.1007/s12540-014-1008-y ↗
13. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗
14. R. Rana, C. Liu, and R.K, Ray: Scripta Mater., 2013, vol. 68, pp. 354–59.10.1016/j.scriptamat.2012.10.004 ↗
15. S.S. Sohn, H. Song, B.-C. Suh, J.-H. Kwak, B.-J. Lee, N.J. Kim, and S. Lee: Acta Mater., 2015, vol. 96, pp. 301–10.10.1016/j.actamat.2015.06.024 ↗
16. H. Huang, D. Gan, and P.W. Kao: Scripta Metall. Mater., 1994, vol. 30, pp. 499–504.10.1016/0956-716X(94)90610-6 ↗
17. W.K. Choo, J.H. Kim, and J.C. Yoon: Acta Mater., 1997, vol. 45, pp. 4877–85.10.1016/S1359-6454(97)00201-2 ↗
18. K. Sato, K. Tagawa, and Y. Inoue: Metall. Trans. A, 1990, vol. 21A, pp. 5–11.10.1007/BF02656419 ↗
19. C.L. Lin, C.G. Chao, H.Y. Bor, and T.F. Liu: Mater. Trans., 2010, vol. 51, pp. 1084–88.10.2320/matertrans.M2010013 ↗
20. K.T. Luo, P.-W. Kao, and D. Gan: Mater. Sci. Eng., 1992, vol. A151, pp. L15–L18.10.1016/0921-5093(92)90195-7 ↗
21. S.Y. Han, S.Y. Shin, H.-J. Lee, B.-J. Lee, S. Lee, N.J. Kim, and J.-H. Kwak: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 843–53.10.1007/s11661-011-0942-2 ↗
22. G. Frommeyer, E.J. Drewes, and B. Engl: Rev. Metall. Cah. Inf. Technol., 2000, vol. 97, pp. 1245–53.
23. L. Falat, A. Schneider, G. Sauthoff, and G. Frommeyer: Intermetallics, 2005, vol. 13, pp. 1256–62.10.1016/j.intermet.2004.05.010 ↗
24. Y. Sutou, N. Kamiya, R. Umino, I. Ohnuma, and K. Ishida: ISIJ Int., 2010, vol. 50, pp. 893–99.10.2355/isijinternational.50.893 ↗
25. K. Choi, C.-H. Seo, H. Lee, S.K. Kim, J.H. Kwak, K.G. Chin, K.-T. Park, and N.J. Kim: Scripta Mater., 2010, vol. 63, pp. 1028–31.10.1016/j.scriptamat.2010.07.036 ↗
26. K.-T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi, and C.S. Lee: Mater. Sci. Eng., 2010, vol. A527, pp. 3651–61.10.1016/j.msea.2010.02.058 ↗
27. B. Kim, T.T.T. Trang, and N.J. Kim: Met. Mater. Int., 2014, vol. 20, pp. 35–39.10.1007/s12540-014-1009-x ↗
28. H. Kim, D.-W. Suh, and N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 1–11.10.1088/1468-6996/14/1/014205 ↗
29. S.S. Sohn, B.-J. Lee, S. Lee, and J.-H. Kwak: Met. Mater. Int., 2015, vol. 21, pp. 43–53.10.1007/s12540-015-1006-8 ↗
30. K.-G Chin, C.-Y. Kang, S.Y. Shin, S. Hong, S. Lee, H.S. Kim, K.-H. Kim, and N.J. Kim: Mater. Sci. Eng., 2011, vol. A528, pp. 2922–28.10.1016/j.msea.2010.12.085 ↗
31. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
32. J.H. Ryu, D.-I. Kim, H.S. Kim, H.K.D.H. Bhadeshia, and D.-W. Suh: Scripta Mater., 2010, vol. 63, pp. 297–99.10.1016/j.scriptamat.2010.04.020 ↗
33. A. Zargaran, H.S. Kim, J.H. Kwak, and N.J. Kim: Met. Mater. Int., 2015, vol. 21, pp. 79–84.10.1007/s12540-015-1009-5 ↗
34. S.S. Sohn, B.-J. Lee, J.-H. Kwak, and S. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3844–56.10.1007/s11661-014-2332-z ↗
35. S.S. Babu, E.D. Specht, S.A. David, E. Karapetrova, P. Zschack, M. Peet, and H.K.D.K. Bhadeshia: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3281–89.10.1007/s11661-005-0002-x ↗
36. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
37. B.D. Cullity: in Elements of X-Ray Diffraction, 2nd ed., M. Cohen, ed., Addison-Wesley, Reading, MA, 1978, pp. 517–18.
38. B. Sundman, B. Jansson, and J.-O. Andersson: Calphad, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
39. “TCFE2000: The Thermo-Calc Steels Database, upgraded by B.-J. Lee, B. Sundman at KTH,” KTH, Stockholm, 1999.
40. K.-G. Chin, H.-J. Lee, J.-H. Kwak, J.-Y. Kang, and B.-J. Lee: J. Alloys Compd., 2010, vol. 505, pp. 217–23.10.1016/j.jallcom.2010.06.032 ↗
41. A. Piñol-Juez, A. Iza-mendia, and I. Gutiérrez: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1671–77.10.1007/s11661-000-0177-0 ↗
42. N. Suutala, T. Takalo, and T. Moisio: Metall. Trans. A, 1980, vol. 11A, pp. 717–25.10.1007/BF02661201 ↗
43. S. Atamert and J.E. King: Acta Metall. Mater., 1991, vol. 39, pp. 273–85.10.1016/0956-7151(91)90306-L ↗
44. C. Herrera, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 4653–64.10.1016/j.actamat.2011.04.011 ↗
45. F.J. Humphreys, P.S. Bate, and P.J. Hurley: J. Microsc., 2001, vol. 201, pp. 50–58.10.1046/j.1365-2818.2001.00777.x ↗
46. D. Yan, C.C. Tasan, and D. Raabe: Acta Mater., 2015, vol. 96, pp. 399–409.10.1016/j.actamat.2015.05.038 ↗
47. S. Takaki, K. Fukunaga, J. Syarif, and T. Tsuchiyama: Mater. Trans., 2004, vol. 45, pp. 2245–51.10.2320/matertrans.45.2245 ↗
48. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, and S. van der Zwaag: Scripta Mater., 2007, vol. 56, pp. 421–24.10.1016/j.scriptamat.2006.10.041 ↗
49. M. Mazinani and W.J. Poole: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 328–39.10.1007/s11661-006-9023-3 ↗
50. G. Krauss: Steels: Processing, Structure, and Performance, 2nd ed., ASM INTERNATIONAL, Ohio, 2015, p. 234.10.31399/asm.tb.spsp2.9781627082655 ↗