The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite
Source abstract
Abstract
This work was carried out to investigate the effect of different Ti concentrations as a modifying agent on the microstructure and tensile properties of an in-situ Al-15 pctMg2Si composite. Cast, modified, and homogenized small ingots were extruded at 753 K (480 °C) at the extrusion ratio of 18:1 and ram speed of 1 mm/s. Various techniques including metallography, tensile testing, and scanning electron microscopy were used to characterize the mechanical behavior, microstructural observations, and fracture mechanisms of this composite. The results showed that 0.5 pctTi addition and homogenizing treatment were highly effective in modifying Mg2Si particles. The results also exhibited that the addition of Ti up to 0.5 pct increases both ultimate tensile strength (UTS) and tensile elongation values. The highest UTS and elongation values were found to be 245 MPa and 9.5 pct for homogenized and extruded Al-15 pctMg2Si-0.5 pctTi composite, respectively. Fracture surface examinations revealed a transition from brittle fracture mode in the as-cast composite to ductile fracture in homogenized and extruded specimens. This can be attributed to the changes in size and morphology of Mg2Si intermetallic and porosity content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. J. Zhang, Z. Fan, Y.Q. Wang, and BL Zhou, Materials Science and Engineering: A 2000, vol. 281, pp. 104-112.10.1016/S0921-5093(99)00732-7 ↗
2. QD Qin, YG Zhao, W. Zhou and PJ Cong, Materials Science and Engineering: A 2007, vol. 447, pp. 186-191.10.1016/j.msea.2006.10.076 ↗
3. YG Zhao, QD Qin, W. Zhou and YH Liang, Journal of alloys and compounds 2005, vol. 389, pp. L1-L4.10.1016/j.jallcom.2004.08.003 ↗
4. N Soltani, A Bahrami, FM Moghimi, MI Pech-Canul and A Hajaghasi, HTM HTM J. Heat Treat. Mater. 2012, vol. 67, pp. 378-385.10.3139/105.110158 ↗
5. A. Bahrami, A. Razaghian, M. Emamy, HR Jafari Nodooshan and GS Mousavi, Key Engineering Materials 2011, vol. 471, pp. 1171-1176.10.4028/www.scientific.net/KEM.471-472.1171 ↗
6. A Razaghian, A Bahrami and M Emamy, Materials Science and Engineering: A 2012, vol. 532, pp. 346-353.10.1016/j.msea.2011.10.101 ↗
7. A. Bahrami, A. Razaghian, M. Emamy and R. Khorshidi, Materials and Design 2012, vol. 36, p. 323-330.10.1016/j.matdes.2011.11.045 ↗
8. AM Bunn, P Schumacher, MA Kearns, CB Boothroyd and AL Greer, Materials science and technology 1999, vol. 15, pp. 1115-1123.10.1179/026708399101505158 ↗
9. L Arnberg, L Backerud and H Klang, Metals Technology 1982, vol. 9, pp. 1-6.10.1179/030716982803286205 ↗
10. C.-T. Lee and S.-W. Chen: Mater. Sci. Eng. A, 2002, vol. 325, pp. 242–48.
11. G.K. Sigworth and T.A. Kuhn: Am. Foundr.Soc. 2007, pp. 1–12.10.1007/BF03355416 ↗
12. TE Quested and AL Greer, Acta materialia 2004, vol. 52, pp. 3859-3868.10.1016/j.actamat.2004.04.035 ↗
13. S. Li, S. Zhao, D. Zhao, M. Pan, and X. Chen: J. Mater. Sci. Technol., 1997, vol. 13, pp. 487–90.
14. C. Li, X. Liu, and G. Zhang: Mater. Sci. Eng. A, 2008, vol. 497, pp. 432–37.10.1016/j.msea.2008.07.034 ↗
15. KT Kashyap and T Chandrashekar, Bulletin of Materials Science 2001, vol. 24, pp. 345-353.10.1007/BF02708630 ↗
16. P. Schumacher and A.L. Greer: LIGHT METALS-WARRENDALE, 1996, pp. 745-54.
17. ER Wang, XD Hui, SS Wang, YF Zhao and GL Chen, Materials Science and Engineering: A 2010, vol. 527, pp. 7878-7884.10.1016/j.msea.2010.08.058 ↗
18. N. Chawla and Y.L. Shen, Advanced engineering materials 2001, vol. 3, pp. 357-370.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
19. L. Babout, Y. Brechet, E. Maire and R. Fougeres, Acta materialia 2004, vol. 52, pp. 4517-4525.10.1016/j.actamat.2004.06.009 ↗
20. R. Rahmani Fard and F. Akhlaghi, Journal of materials processing technology 2007, vol. 187, pp. 433-436.10.1016/j.jmatprotec.2006.11.077 ↗
21. A. Malekan, M. Emamy, J. Rassizadehghani and AR Emami, Materials & Design 2011, vol. 32, pp. 2701-2709.10.1016/j.matdes.2011.01.020 ↗