Advances in deformation twin characterization using electron backscattered diffraction data
Source abstract
Abstract
This article reports on recent progress in the effort to develop an automated, crystallographically based twin identification and quantification routine using large sets of spatially correlated electron backscattered diffraction (EBSD) data. The proposed analysis scheme uses information about the most probably occurring twin types and the macroscopic stress state, taken together with the crystallographic theory of deformation twinning, to identify and classify twinned areas in a scanned cross section of a material. The key features of the analysis are identification of potential twin boundaries by their misorientation character, validation of these boundaries through comparison with the actual boundary position and twin-plane matching across the boundary, and calculation of the Schmid factors for the orientations on either side of the boundary. This scheme will allow researchers to quantify twin area fractions from statistically significant regions and, in turn, estimate twinned volume fractions with reasonable reliability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced X-ray Imaging Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
2. C.N. Tomé, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49, pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
3. G.C. Kaschner and G.T. Gray III: Metall. Mater: Trans. A, 2000, vol. 31A, pp. 1997–2003.10.1007/s11661-000-0227-7 ↗
4. G.C. Kaschner, J.F. Bingert, C. Liu, M.L. Lovato, P.J. Maudlin, M.G. Stout, and C.N. Tomé: Acta Mater., 2001, vol. 49, pp. 3097–108.10.1016/S1359-6454(01)00191-4 ↗
5. J.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, and G.T. Gray III: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, Kluwer Academic Press, New York, NY, 2000, pp. 213–29.10.1007/978-1-4757-3205-4_18 ↗
6. S.R. Kalidindi: J. Mech. Phys. Solids, 1998, vol. 46, pp. 267–90.10.1016/S0022-5096(97)00051-3 ↗
7. S.I. Wright: Computer-Assisted Microscopy, 1993, vol. 5, pp. 207–21.
8. T.A. Mason and B.L. Adams: JOM, 1994, vol. 46, pp. 43–45.10.1007/BF03222608 ↗
9. H.-J. Bunge: Texture Analysis in Materials Science—Mathematical Methods, Butterworth & Co., London, 1982, ch. 1.
10. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Cambridge University Press, New York, NY, 1998, ch. 1 and 2.
11. S.I. Wright and R.J. Larsen: J. Microsc., 2002, in press.
12. P.G. Partridge: Met. Rev. 1967, vol. 12, pp. 169–94.10.1179/095066067790138184 ↗
13. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM, Philadelphia, PA, 1988.
14. N. Munroe, X.L. Tan, and H.C. Gu: Scripta Mater., 1997, vol. 36, pp. 1383–86.10.1016/S1359-6462(97)00048-1 ↗
15. W.E. King, J.S. Stölken, M. Kumar, and A.J. Schwartz: Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, eds. Kluwer Academic Press, New York, NY, 2000, pp. 153–70.10.1007/978-1-4757-3205-4_14 ↗
16. OIM Analysis Manual, Edax/TSL, Draper, UT, 2001.