journal article·2009-07

Influence of Higher Zn/Y Ratio on the Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys

D. K. Xu, En-Hou Han, L. Liu, Y. B. Xu

Publisher page

Abstract

This work mainly investigated the microstructure and mechanical properties of Mg-Zn-Y-Zr alloys with Zn/Y ratios of 5 and 10. An X-ray diffraction (XRD) analysis indicated that the two alloys were mainly composed of an icosahedral phase (I-phase) and α-Mg matrix. For the alloy with a Zn/Y ratio of 10, however, the diffraction peaks of the I-phase were stronger. Microstructure observation showed that the I-phase preferentially existed in the form of I-phase/α-Mg matrix interdendritic eutectic pockets at grain boundaries. Moreover, when the Zn/Y ratio was increased 2 times, the volume fraction of the I-phase in the α-Mg matrix increased 1.5 times and a tiny Mg7Zn3 phase formed. Energy-dispersive spectroscopy (EDS) mapping and electron probe microanalysis (EPMA) results suggested that the chemical composition of the I-phase was not a constant value. Computer-aided cooling curve analysis (CA-CCA) indicated that, for the alloy with a Zn/Y ratio of 5, formation of the I-phase relied on the W-phase transformation and the eutectic reaction of the residual melt. However, the I-phase formation for the alloy with a Zn/Y ratio of 10 depended on the eutectic reaction of the melt. Tensile tests indicated that the mechanical properties of the two as-cast alloys were poor. After hot extrusion processing, the mechanical properties of the alloy with a Zn/Y ratio of 10 were noticeably increased. The ultimate tensile strength (UTS) and elongation to failure reached 320 MPa and 13 pct, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Z.P. Luo, S.Q. Zhang, Y.L. Tang, and D.S. Zhao: Scripta Metall. Mater., 1993, vol. 28, pp. 1513–18.10.1016/0956-716X(93)90584-F ↗
2. A Niikura, A.P. Tsai, A. Innoe, and T. Matsumoto: Philos. Mag. Lett., 1994, vol. 69, pp. 351–55.10.1080/09500839408242444 ↗
3. A.P. Tsai, A. Niikura, A. Innoe, T. Matsumoto, K. Tsuda, and M. Tanaka: Philos. Mag. Lett., 1994, vol. 70, pp. 169–75.10.1080/09500839408240971 ↗
4. A.P. Tsai, T. Matsumoto, and A. Niikura: Philos. Mag. A, 2000, vol. 80, pp. 1043–54.10.1080/01418610008212098 ↗
5. J.B. Ok, I.J. Kim, S. Yi, T.W. Kim, and D.H. Kim: Philos. Mag. A, 2003, vol. 83, pp. 2359–69.10.1080/0141861031000113325 ↗
6. D.H. Bae, Y. Kim, and I.J. Kim: Mater. Lett., 2006, vol. 60, pp. 2190–93.10.1016/j.matlet.2005.12.096 ↗
7. D.H. Bae, M.H. Lee, K.T. Kim, W.T. Kim, and D.H. Kim: J. Alloys Compd., 2002, vol. 342, pp. 445–50.10.1016/S0925-8388(02)00273-6 ↗
8. A. Singh, M. Nakamura, M. Watanabe, A. Kato, and A.P. Tsai: Scripta Mater., 2003, vol. 49, pp. 417–22.10.1016/S1359-6462(03)00305-1 ↗
9. F.S. Pierce, S.J. Poon, and Q. Guo: Science, 1993, vol. 261, pp. 737–39.10.1126/science.261.5122.737 ↗
10. J.M. Dubois, P. Plaindoux, E. Berlin-Ferre, N. Tamura, and D.J. Sordelet: Proc. 6th Int. Conf. Quasicrystals, World Scientific, Singapore, 1997.
11. E.S. Park, S. Yi, J.B. Ok, D.H. Bae, and W.T. Kim: Proc. MRS Fall Meeting, Boston, MA, 2001.
12. D.K. Xu, L. Liu, Y.B. Xu, and E.H. Han: Scripta Mater., 2007, vol. 57, pp. 285–88.10.1016/j.scriptamat.2007.03.017 ↗
13. J.Y. Lee, H.K. Lim, D.H. Kim, W.T. Kim, and H.K. Do: Mater. Sci. Eng., A, 2007, vols. 449–451, pp. 987–90.10.1016/j.msea.2006.03.141 ↗
14. A. Singh, M. Watanabe, A. Kato, and A.P. Tsai: Mater. Sci. Eng., A, 2004, vol. 385, pp. 382–96.10.1016/S0921-5093(04)00903-7 ↗
15. D.K. Xu, W.T. Tang, L. Liu, Y.B. Xu, and E.H. Han: J. Alloys Compd., 2007, vol. 432, pp. 129–34.10.1016/j.jallcom.2006.05.123 ↗
16. D.K. Xu, L. Liu, Y.B. Xu, and E.H. Han: J. Alloys Compd., 2006, vol. 426, pp. 155–61.10.1016/j.jallcom.2006.02.035 ↗
17. J.Y. Lee, D.H. Kim, H.K. Lim, and H. Kim: Mater. Lett., 2005, vol. 59, pp. 3801–05.10.1016/j.matlet.2005.06.052 ↗
18. X.Q. Zeng, Y. Zhang, C. Lu, W.J. Ding, Y.X. Wang, and Y.P. Zhu: J. Alloys Compd., 2005, vol. 395, pp. 213–19.10.1016/j.jallcom.2004.10.070 ↗
19. D.K. Xu, L. Liu, Y.B. Xu, and E.H. Han: Mater. Sci. Eng., A, 2007, vol. 443, pp. 248–56.10.1016/j.msea.2006.08.037 ↗
20. Y. Zhang, X.Q. Zeng, L.F. Liu, C. Lu, H.T. Zhou, Q. Li, and Y.P. Zhu: Mater. Sci. Eng., A, 2004, vol. 373, pp. 320-27.10.1016/j.msea.2004.02.007 ↗
21. Structure and Properties of Engineering Alloys, W.F. Smith, ed., McGraw-Hill, New York, NY, 1993, p. 542.
22. D.K. Xu, W.T. Tang, L. Liu, Y.B. Xu, and E.H. Han: J. Alloys Compd., 2008, vol. 461, pp. 248–52.10.1016/j.jallcom.2007.07.096 ↗
23. S. Yi, E.S. Park, J.B. Ok, W.T. Kim, and D.H. Kim: Mater. Sci. Eng., A, 2001, vol. 300, pp. 312–15.10.1016/S0921-5093(00)01474-X ↗
24. M.F. Horstemeyer and N. Yang: Acta Mater., 2004, vol. 52, pp. 1327–36.10.1016/j.actamat.2003.11.018 ↗
25. S.M. Liang, R.S. Chen, J.J. Blandin, M. Suery, and E.H. Han: Mater. Sci. Eng., A, doi:10.1016/j.msea.2007.07.025.10.1016/j.msea.2007.07.025 ↗
26. D. Emadi, L.V. Whiting, S. Nafisi, and R. Ghomashchi: J. Therm. Anal. Calorim., 2005, vol. 81, pp. 235–42.10.1007/s10973-005-0772-9 ↗
27. K.G. Upadhya, D.M. Stefanescu, K. Lieu, and D.P. Yeager: AFS Trans., 1989, vol. 97, pp. 61–66.
28. S. Thompson, S.L. Cockcroft, and M.A. Wells: Mater. Sci. Technol., 2004, vol. 20, pp. 194–200.10.1179/026708304225011199 ↗
29. W.T. Kierkus and J.H. Solokowski: AFS Trans., 1999, vol. 107, pp. 161–67.
30. D. Mirkovic and R. Schmid-Fetzer: Z. Metallkd., 2006, vol. 97, pp. 119–29.
31. E. Fras, W. Kapturkiewicz, A. Burbielko, and H.F. Lopez: AFS Trans., 1993, vol. 101, pp. 505–11.
32. D.K. Xu, L. Liu, Y.B. Xu, and E.H. Han: Acta Mater., 2008, vol. 56, pp. 985–94.10.1016/j.actamat.2007.10.057 ↗
33. D.H. Bae, S.H. Kim, D.H. Kim, and W.T. Kim: Acta Mater., 2002, vol. 50, pp. 2343–56.10.1016/S1359-6454(02)00067-8 ↗
34. Y. Brechet, J.D. Embury, S. Tao, and L. Luo: Acta Metall Mater., 1991, vol. 39, pp. 1781–86.10.1016/0956-7151(91)90146-R ↗
35. D.J. Lloyd: Acta Metall Mater., 1991, vol. 39, pp. 59–71.10.1016/0956-7151(91)90328-X ↗
36. A. Langsdorf, F. Ritter, and W. Assmus: Philos. Mag. Lett., 1997, vol. 75, pp. 381–87.10.1080/095008397179453 ↗
37. N. Lebrun, A. Stamou, C. Baetzner, J. Robinson, and A. Pisch: in Ternary Alloys, G. Effenberg, F. Aldinger, and P. Rogl, eds., Materials Science International Services, Stuttgart, 2001, vol. 18, p. 702.
38. Y. Zhang, S. Yu, X. Zhu, and Y. Luo: J. Non-Cryst. Solids, 2008, vol. 354, pp. 1564–68.10.1016/j.jnoncrysol.2007.08.049 ↗
39. G. Shao, V. Varsni, and Z. Fan: CALPHAD, 2006, vol. 30, pp. 286–95.10.1016/j.calphad.2006.03.005 ↗
40. R.J. Arsenault, L. Wang, and C.R. Feng: Acta Metall. Mater., 1991, vol. 39, pp. 47–57.10.1016/0956-7151(91)90327-W ↗
41. W.S. Miller and F.J. Humphreys: Scripta Metall. Mater., 1991, vol. 25, pp. 33–38.10.1016/0956-716X(91)90349-6 ↗
42. R.M. Aikin, Jr., and L. Christodoulou: Scripta Metall. Mater., 1991, vol. 25, pp. 9–14.10.1016/0956-716X(91)90345-2 ↗
43. J.W. Luster, M. Thumann, and R. Baumann: Mater. Sci. Technol., 1993, vol. 9, pp. 853–62.10.1179/026708393790171421 ↗
44. M. Mabuchi and K. Higashi: Acta Mater., 1996, vol. 44, pp. 4611–18.10.1016/1359-6454(96)00072-9 ↗
45. P. Dobroň, J. Bohlen, F. Chmelík, P. Lukáč, D. Letzig, and K.U. Kainer: Mater Sci. Eng., A, 2007, vol. 462, pp. 307–10.10.1016/j.msea.2005.12.111 ↗