Effect of Nitrogen on Stacking Fault Formation Probability and Mechanical Properties of Twinning-Induced Plasticity Steels
Source abstract
Abstract
Twinning induced plasticity (TWIP) steels containing nitrogen as the interstitial alloying element were designed, and the effects of N and Al on stacking fault energy (SFE), microstructure, and mechanical properties were investigated by using X-ray diffraction and transmission electron microscopy to determine the stacking fault formation probability. In addition, the microstructure and mechanical properties have been characterized. The results indicate that both N and Al decrease the stacking fault formation probability due to the increase of the SFE. The probability of localized stacking fault determined by a new method using electron diffraction spot shift reveals that stress- or strain-induced martensitic transformations (γfcc → ehcp → α′bcc) during deformation may consume a large number of stacking faults and give rise to a more marked decrease in the stacking fault formation probability of TWIP steels with lower SFE than of higher one(s). Based on their magnitude of SFEs, the temperature-dependent mechanical properties of four TWIP steels were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. O. Grassel, L. Kruger, G. Frommeyer: Int. J. Plasticity, 2000, vol. 16, pp. 1391–140910.1016/S0749-6419(00)00015-2 ↗
2. O. Grassel, G. Frommeyer, C. Derder, H. Hofman: J. Phys. IV France, 1997, vol. C5, pp. 383–88
3. V.F. Zackay, E.R. Parker, D. Fahr, R. Bush: Trans. ASM, 1967, vol. 60, pp. 252–59
4. I. Tamura, T. Maki, H. Hato: Trans. ISIJ, 1970, vol. 10, pp. 163–7210.2355/isijinternational1966.10.163 ↗
5. B.X. Huang, X.D. Wang, Y.H. Rong, L. Wang: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 306–1110.1016/j.msea.2006.02.150 ↗
6. K. Sato, M. Ichinose, Y. Hirotsu, Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–7710.2355/isijinternational.29.868 ↗
7. J.W. Christian, S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–15710.1016/0079-6425(94)00007-7 ↗
8. B.H. Jiang, X. Qi, S. Yang, W. Zhou, and T.Y. Hsu (Xu Zuyao): Acta Mater., 1998, vol. 46, pp. 501–1010.1016/S1359-6454(97)00266-8 ↗
9. X.D. Wang, B.X. Huang, and Y.H. Rong: J. Appl. Phys, 2007, vol. 101, p. 09351110.1063/1.2655682 ↗
10. S. Kibey, J.B. Liu, D.D. Johnson, H. Sehitoglu: Appl. Phys. Lett., 2006, vol. 89, p. 19191110.1063/1.2387133 ↗
11. R.E. Schramm, R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–5110.1007/BF02641927 ↗
12. Y. Rong, G. He, Z. Guo, S. Chen, and T.Y. Hsu (Xu Zuyao): J. Mater. Sci. Technol., 2002, vol. 18, pp. 459–61
13. B.Y. Warren: X-Ray Diffraction, Addison-Wesley, Reading, MA, 1969, pp. 275–98
14. Z. Nishiyama, J. Kakinoki, S. Kajiwara: J. Phys. Soc. Jpn., 1965, vol. 20, pp. 1192–21110.1143/JPSJ.20.1192 ↗
15. S. Kajiwara: J. Appl. Phys., 1970, vol. 9, pp. 385–9010.1143/JJAP.9.385 ↗
16. S. Kajiwara: J. Phys. Soc. Jpn., 1967, vol. 22, pp. 795–80310.1143/JPSJ.22.795 ↗
17. K. Ogawa, S. Kajiwara: Mater. Trans. JIM, 1993, vol. 34, pp. 1169–7610.2320/matertrans1989.34.1169 ↗
18. G. Frommeyer, Udo Brux, Peter Neumann: ISIJ Int., 2003, vol. 43, pp. 438–4610.2355/isijinternational.43.438 ↗
19. L. Remy: Acta Metall., 1978, vol. 26, pp. 443–5110.1016/0001-6160(78)90170-0 ↗
20. Jong M. Han, Cha Y. Lim, Young G. Kim: Acta Metall. Mater., 1991, vol. 39 (9), pp. 2169–7510.1016/0956-7151(91)90186-5 ↗
21. S. Vercammen, B. Blanpain, B.C. De Cooman, P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005–1210.1016/j.actamat.2003.12.040 ↗
22. P.L. Mangonon, G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–8610.1007/BF02642003 ↗