Thermomechanical Processing for Recovery of Desired $$ {\left\langle {001} \right\rangle } $$ Fiber Texture in Electric Motor Steels
Source abstract
Abstract
A processing route has been developed for recovering the desired λ fiber in iron-silicon electrical steel needed for superior magnetic properties in electric motor application. The λ fiber texture is available in directionally solidified iron-silicon steel with the \( {\left\langle {001} \right\rangle } \) columnar grains but was lost after heavy rolling and recrystallization required for motor laminations. Two steps of light rolling each followed by recrystallization were found to largely restore the desired fiber texture. This strengthening of the \( {\left\langle {001} \right\rangle } \) fiber texture had been predicted on the basis of the strain-induced boundary migration (SIBM) mechanism during recrystallization of lightly rolled steel from existing grains of near the ideal orientation, due to postulated low stored energies. Taylor and finite element models supported the idea of the low stored energy of the λ fiber grains. The models also showed that the λ fiber grains, though unstable during rolling, only rotated away from their initial orientations quite slowly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.M. Bozorth: Ferromagnetism, 1st ed., Van Nostrand, New York, NY, 1951, pp. 570–75
2. N.P. Goss: Trans. TMS-AIME, 1935, vol. 23, pp. 511–44
3. K. Honda and S. Kaya: Science Report, Tohoku Imperial University, Sendai, Japan, 1926, vol. 15, pp. 721–53
4. A.D. Rollett, M.L. Storch, E.J. Hilinski, and S.R. Goodman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2595–260310.1007/s11661-001-0049-2 ↗
5. N. Tesla: AIEE Trans., 1888, vol. 5, pp. 305–24
6. H.J. Fisher, and J.L. Walter: Trans. TMS-AIME, 1962, vol. 224, pp. 1271–77
7. W. Kurz, and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–2010.1016/0001-6160(81)90082-1 ↗
8. F.J.G. Landgraf, T. Yonamine, R. Takanohashi, F.Q. Silva, J.P.V. Tosetti, F. Beneduce Neto, E. Albertin, V.N.G. Mazzarella, I.G.S. Falleiros, and M. Emura: J. Magn. Magn. Mater., 2003, vols. 254–255, pp. 364–6610.1016/S0304-8853(02)00869-7 ↗
9. T. Yonamine, N.A. Castro, and J.G.F. Landgraf: Steel Res. Int., 2005, vol. 76, pp. 461–6310.1002/srin.200506039 ↗
10. I.L. Dillamore, C.J.E. Smith, and T.W. Watson: Met. Sci., 1968, vol. 1, p. 193
11. I.L. Dillamore, P.L. Morris, C.J.E. Smith, and W.B. Hutchinson: Proc. R. Soc. London A, 1972, vol. 329, pp. 405–2010.1098/rspa.1972.0120 ↗
12. P.A. Beck, and P.R. Sperry: J. Appl. Phys., 1950, vol. 21, pp. 150–5210.1063/1.1699614 ↗
13. Y. Inokuti, and R.D. Doherty: Text. Cryst. Solids, 1977, vol. 2, pp. 143–6810.1155/TSM.2.143 ↗
14. W.B. Hutchinson: Acta Metall., 1989, vol. 37, pp. 1047–5610.1016/0001-6160(89)90101-6 ↗
15. I. Samajdar, B. Verlinden, P. Van Houtte, and D. Vanderschueren: Mater. Sci. Eng., 1997, vol. A238, pp. 343–5010.1016/S0921-5093(97)00455-3 ↗
16. B.L. Adams, S.I. Wright, and K. Kunze: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 819–3110.1007/BF02656503 ↗
17. A. Bhattacharyya, E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Int. J. Plasticity, 2001, vol. 17, pp. 861–8310.1016/S0749-6419(00)00072-3 ↗
18. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24
19. S.R. Kalidindi, C.A. Bronkhorst, and L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537–6910.1016/0022-5096(92)80003-9 ↗
20. H.-J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Cuvillier Verlag, Göttingen, 1993, pp. 5–8
21. F.J. Humphreys, and M. Hatherly: Recrystallization and Related Annealing Phenomena, 1st ed., Pergamon Press, Oxford, United Kingdom, 1995, pp. 173–220
22. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–7410.1016/S0921-5093(97)00424-3 ↗
23. S. Panchanadeeswaran, R.D. Doherty, and R. Becker: Acta Mater., 1996, vol. 44, pp. 1233–6210.1016/1359-6454(95)00186-7 ↗
24. J.K. Mackenzie, and M.J. Thompson: Biometrika, 1957, vol. 44, pp. 205–1010.1093/biomet/44.1-2.205 ↗
25. R. Doherty, E. Hoffman, C. Hovanec, and A. Lens: Mater. Sci. Forum, 2004, vols. 467–470, pp. 843–5210.4028/www.scientific.net/MSF.467-470.843 ↗
26. J.E. Burke, and D. Turnbull: Progr. Met. Phys., 1952, vol. 3, pp. 220–9210.1016/0502-8205(52)90009-9 ↗
27. S.R. Kalidindi, A. Bhattacharyya, and R.D. Doherty: Proc. R. Soc. A, 2004, vol. 460, pp. 1935–5610.1098/rspa.2003.1260 ↗