journal article·2013-08

Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment

S. L. Semiatin, K. T. Kinsel, A. L. Pilchak, G. A. Sargent

Publisher page

Abstract

The effect of preheat time, prestrain, cooling rate, and concurrent deformation during cooling on the preferential selection of hcp alpha variants during the decomposition of the high-temperature, bcc beta phase in two-phase titanium alloys was established using Ti-6Al-4V sheet material. For this purpose, sheet tension samples were pre-soaked in the beta phase field for 0 or 10 minutes (to vary the beta grain size), subjected to a prestrain of 0 or 0.1, and cooled at a rate of 11 or 155 K/min (11 or 155 °C/min) under conditions comprising free ends, fixed ends, or concurrent deformation at a strain rate between ~10−5 and 3 × 10−4 s−1. Electron-backscatter diffraction was used to determine the orientations of the alpha variants so formed, from which the underlying high-temperature, beta-grain microstructure and orientations were reconstructed. These measurements revealed that the parent beta texture changed due to grain growth during preheating. A comparison of the alpha- and beta-phase textures indicated that preferential variant selection was most noticeable under conditions involving a slow cooling rate especially when prestrain or concurrent straining was imposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. D. Dunst and H. Mecking: Zeitschrift für Metallkunde, 1996, vol. 87, pp. 498-507.
2. N.R. Barton and P.R. Dawson: Model. Simul. Mater. Sci. Eng., 2001, vol. 9, pp. 433-463.10.1088/0965-0393/9/5/308 ↗
3. S.V. Divinski, V.N. Dnieprenko, and O.M. Ivasishin: Mater. Sci. Eng. A, 1998, vol. A243, pp. 201-205.10.1016/S0921-5093(97)00801-0 ↗
4. M. Humbert, L. Germaine, N. Gey, P. Bocher, and M. Jahazi: Mater. Sci. Eng. A, 2006, vol. A430, pp. 157-164.10.1016/j.msea.2006.05.047 ↗
5. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. A392, pp. 403-414.10.1016/j.msea.2004.09.072 ↗
6. W.G. Burgers: Physica, 1934, vol. 1, pp. 561-586.10.1016/S0031-8914(34)80244-3 ↗
7. D. He, J.C. Zhu, S. Zaefferer, D. Raabe, Y. Liu, Z.L. Lai, and X.W. Yang: Mater. Sci. Eng. A, 2012, vol. A549, pp. 20-29.10.1016/j.msea.2012.03.110 ↗
8. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215-5224.10.1016/j.actamat.2004.07.034 ↗
9. G.C. Obasi, S. Birosca, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 1048–58.10.1016/j.actamat.2011.10.038 ↗
10. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer, and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679-4691.10.1016/S1359-6454(03)00179-4 ↗
11. G.C. Obasi, S. Birosca, D.G.L. Prakash, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 6013–24.10.1016/j.actamat.2012.07.025 ↗
12. S.L. Semiatin, P.N. Fagin, M.G. Glavicic, I.M. Sukonnik, and O.M. Ivasishin: Mater. Sci. Eng. A, 2001, vol. A299, pp. 225-234.10.1016/S0921-5093(00)01371-X ↗
13. H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 51-59.10.1007/s11661-997-0082-x ↗
14. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1996, vol. A219, pp. 80-88.10.1016/S0921-5093(96)10388-9 ↗
15. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1997, vol. A230, pp. 68-74.10.1016/S0921-5093(97)80111-6 ↗
16. A.R. Shively, P.A. Shade, A.L. Pilchak, J.S. Tiley, and R. Kerns: J. Microscopy, 2011, vol. 244, pp. 181-186.10.1111/j.1365-2818.2011.03524.x ↗
17. A.L. Pilchak, A.R. Shively, J.S. Tiley, and D.L. Ballard: J. Microscopy, 2011, vol. 244, pp. 38-44.10.1111/j.1365-2818.2011.03496.x ↗
18. M. Humbert, H. Moustahfid, F. Wagner, and M.J. Philippe: Mater. Sci. Forum, 1994, vol. 157, pp. 1225-1230.10.4028/www.scientific.net/MSF.157-162.1225 ↗
19. M. Humbert, F. Wagner, H. Moustahfid, and C. Esling: J. Appl. Cryst., 1995, vol. 28, pp. 571-576.10.1107/S0021889895004067 ↗
20. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 50-59.10.1016/S0921-5093(02)00535-X ↗
21. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A351, pp. 258-264.10.1016/S0921-5093(02)00844-4 ↗
22. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 773-794.10.1007/s11661-010-0434-9 ↗
23. S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Mater., 1996, vol. 44, pp. 1979-1986.10.1016/1359-6454(95)00311-8 ↗
24. O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Acta Mater., 2003, vol. 51, pp. 1019-1034.10.1016/S1359-6454(02)00505-0 ↗
25. D. Bhattacharyya, G.B. Viswanathan, S.C. Vogel, D.J. Williams, V. Venkatesh, and H.L. Fraser: Acta Mater., 2006, vol. 54, pp. 231-236.
26. G.C. Obasi, R.J. Moat, D.G.L. Prakash, W. Kockelmann, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 7169–82.10.1016/j.actamat.2012.09.026 ↗
27. H.J. Hucek: Aerospace Structural Metals Handbook. Metals and Ceramics Information Center, Battelle, Columbus, OH, 1991.
28. V.N. Gridnev, O.M. Ivasishin, and S.P. Oshkaderov: in Titanium, Science and Technology, G. Lütjering, U. Zwicker, and W. Bunk, eds., Deutsche Gesellschaft für Metallkunde e.V., Oberursel, 1985, pp. 1635–41.
29. E.W. Collings: The Physical Metallurgy of Titanium Alloys, ASM, Materials Park, OH, 1984, ch. 4.
30. C. Shen, J.P. Simmons, and Y. Wang: Acta Mater., 2006, vol. 54, pp. 5617-5630.10.1016/j.actamat.2006.08.012 ↗
31. G.A. Sargent, K.T. Kinsel, A.L. Pilchak, A.A. Salem, and S.L. Semiatin: Metall. and Mater. Trans. A, 2012, vol. 43A, pp. 3570-3585.10.1007/s11661-012-1245-y ↗
32. M. Humbert, L. Germaine, N. Gey, P. Bocher, and M. Jahazi: Mater. Sci. Eng., 2006, vol. A430, pp. 157-164.10.1016/j.msea.2006.05.047 ↗
33. A. Kelly, G.W. Groves, and P. Kidd: Crystallography and Crystal Defects, Wiley, West Sussex, England, 2000.