journal article·2008-12

Effect of Variation in Process Parameters on the Formation of Freckle in INCONEL 718 by Vacuum Arc Remelting

Xianhui Wang, R. Mark Ward, Mike H. Jacobs, Mark D. Barratt

Publisher page

Abstract

In order to study the effect of variation in process parameters on the final ingot of INCONEL 718 during vacuum arc remelting, a 508-mm-diameter vacuum arc remelting (VAR) ingot of INCONEL 718 was produced under conditions of variation in electrode diameter and arc gap. It was sectioned and analyzed in the as-cast state. Freckle was found in the midradius and center regions when the electrode diameter and arc gap changed. The experimental results were discussed in relation to composition, current distribution, and fluid flow. Freckle formation was found to be associated with large changes in melting conditions probably resulting in significant perturbation of the fluid flow in the melt pool and mushy zone. Instability in the solidification process may contribute to the initiation and formation of freckle defects in INCONEL 718 ingot.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quality and Management Systems · Metallurgical Processes and Thermodynamics · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. G.E. Maurer: in Superalloys, Supercomposites and Superceramics, J.K. Tien, T. Caulfield, eds., Academic Press, Inc., San Diego, CA, 1989, pp. 49–8010.1016/B978-0-12-690845-9.50009-9 ↗
2. K.O. Yu, J.A. Domingue, G.E. Maurer, H.D. Flanders: JOM, 1986, vol. 1, pp. 46–5010.1007/BF03257955 ↗
3. K.O. Yu, J.A. Domingue: in Superalloy 718—Metallurgy and Application, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 33–4810.7449/1989/Superalloys_1989_33_48 ↗
4. K. Morita, T. Suzuki, T. Taketsuru, D.G. Evans, W. Yang: in Superalloy 718, 625 706 and Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 149–6010.7449/2001/Superalloys_2001_149_160 ↗
5. A. Mitchell: Proc. Vacuum Melting Conf. on Specialty Metals Melting and Processing, G.K Bhat and L.W. Lherbier, eds., TMS, Warrendale, PA, 1986, pp. 55–61
6. L.A. Jackman, G.E. Maurer, S. Widge: Adv. Mater. Proc., 1993, vol. 5, pp. 18–25
7. L.A. Jackman, G.E. Maurer, S. Widge: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 153–6110.7449/1994/Superalloys_1994_153_166 ↗
8. B.K. Damkroger, J.B. Kelley, M.E. Schlienger, J.A. Van Den Avyle, R.L. Williamson, F.J. Zanner: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 125–3510.7449/1994/Superalloys_1994_125_135 ↗
9. X. Wang, M.D. Barratt, R.M. Ward, M.H. Jacobs: J. Mater. Sci., 2004, vol. 39, pp. 7169–7410.1023/B:JMSC.0000048728.85832.44 ↗
10. L.A. Bertram, F.J. Zanner: in Modelling of Casting and Welding, H.D. Brody, D. Apelian, eds., TMS-AIME, Warrendale, PA, 1980, pp. 333–49
11. K.O. Yu and H.D. Flanders: Proc. AVS Vacuum Arc Metallurgy Conf., G.K. Bhat and M. Lherbier, eds., AVS, Pittsburgh, PA, 1986, pp. 107–18
12. J. Van Den Avyle, J.A. Brooks, A.C. Powell: JOM, 1998, vol. 50 (3), pp. 22–25, 4910.1007/s11837-998-0374-7 ↗
13. K.O. Yu: Modelling for Casting and Solidification Processing, Marcel Dekker, Inc., New York, NY, 2002, pp. 577–86
14. F.J. Zanner, R.L. Williamson, R.P. Harrison, H.D. Flanders, R.D. Thompson, W.C. Szeto: in Superalloy 718—Metallurgy and Application, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 17–3210.7449/1989/Superalloys_1989_17_32 ↗
15. L.A. Bertram, C.B. Adasczik, D.G. Evans, R.S. Minisandram, P.A. Sackinger, D.D. Wegman, and R.L. Williamson: Proc. 1997 Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell and P. Auburtin, eds., American Vacuum Society, Santa Fe, NM, 1997, pp. 110–32
16. P.A. Davidson, X. He, A.J. Lowe: Mater. Sci. Technol., 2000, vol. 16, pp. 699–71110.1179/026708300101508306 ↗
17. R.M. Ward, M.H. Jacobs: J. Mater. Sci., 2004, vol. 39, pp. 7135–4310.1023/B:JMSC.0000048724.99705.e7 ↗
18. D.G. Evans: Special Metals Corporation, New Hartford, CT, unpublished research, 2004
19. Y. Murata, M. Morinaga, N. Yukawa, H. Ogawa, M. Kato: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 81–8810.7449/1994/Superalloys_1994_81_88 ↗
20. W. Chen, W.H. Yang, K.M. Chang, S.K. Mannan, and J.J. DeBarbadillo: Proc. 1999 Int. Symp. of Liquid Metal Processing and Casting, A. Mitchell, L. Ridgway, and M. Baldwin, eds., AVS, Santa Fe, NM, 1999, pp. 122–29
21. J.F. Radavich: in Superalloy 718: Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 229–40
22. M.J. Cieslak, G.A. Knorovsky, T.J. Headley, J.A.D. Romig: in Superalloy 718—Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 59–6810.7449/1989/Superalloys_1989_59_68 ↗
23. R.G. Carlson, E. Ohio, J.F. Radavich: in Superalloy 718, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 79–95
24. G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, W.F. Hammetter: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 2149–6010.1007/BF02650300 ↗
25. W. Yang, W. Chen, K.M. Chang, S. Manna, J. DeBarbadillo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2569–74.10.1007/s11661-000-0201-4 ↗
26. W.H. Yang, W. Chen, K.M. Chang, S.K. Mannan, and J. DeBarbadillo: 9th Int. Symp. on Superalloys, T.M. Pollock, R.D. Kissinger, R.R. Bowman, and K.A. Green, eds., TMS-AIME, New York, NY, 2000b, pp. 75–8410.7449/2000/Superalloys_2000_75_84 ↗
27. A. Mitchell, T. Wang: in Superalloy 718, 625 706 and Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 81–9010.7449/2001/Superalloys_2001_81_90 ↗
28. M.J. Cieslak: Weld. J., 1991, vol. 70, pp. 49–56
29. K.M. Chang, H.J. Lai, J.Y. Hwang: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 683–94.10.7449/1994/Superalloys_1994_683_694 ↗
30. H. Fredriksson, A. Olsson: Mater. Sci. Technol., 1986, vol. 2, pp. 508–1610.1179/mst.1986.2.5.508 ↗
31. S.C. Flood, J.D. Hunt: Metals Handbook, 9th ed., vol. 15. ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 130–35.
32. A. Ghosh: Sādhanā, 2001, vol. 26, pp. 5–2410.1007/BF02728476 ↗
33. P. Auburtin, T. Wang, S.L. Cockcroft, A. Mitchell: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 801–1110.1007/s11663-000-0117-9 ↗