Modeling Hot Tearing during Solidification of Steels: Assessment and Improvement of Macroscopic Criteria through the Analysis of Two Experimental Tests
Source abstract
Abstract
Hot tearing is an unacceptable defect found in products and parts obtained by solidification processes such as ingot and continuous casting. It consists of the development of cracks during solidification, in regions that are not completely solidified, more precisely, in areas of mushy zones with a high fraction of solid (typically 0.9 and beyond), when the material undergoes deformations associated with tensile stress. In this study, two hot tearing tests have been studied in order to evaluate the predictive capability of several macroscopic criteria published in the literature. The first test is a new test specifically designed for constrained shrinkage by the present authors, while the second test is an ingot bending test developed in the 1980s. For both tests, a thermal-mechanical analysis is performed, in order to provide the key variables for the different selected criteria. A comparison with experimental results allows us to make a critical assessment of those criteria regarding their ability to predict crack occurrence. The criterion initially proposed by Won et al.[7] has been found to be the best suited for the prediction of solidification cracking. Because this criterion is essentially based on the “brittle temperature range,” (BTR) critical considerations regarding nonequilibrium solidification have led to suggest an extension of this criterion. This new macroscopic criterion improves the prediction capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J. Campbell: Castings, Butterworth-Heinemann, Oxford, United Kingdom, 1991.
2. Hot Cracking Phenomena in Welds, T. Böllinghaus and H. Herold, eds., Springer, Berlin, 2005.
3. S. Vernède, Ph. Jarry, and M. Rappaz: Proc. 11th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes, C.-A. Gandin and M. Bellet, eds., TMS, Warrendale, PA, 2006, pp. 635–42.
4. D. Fuloria, P.D. Lee, and D. Bernard: Proc. SP07, 5th Decennial Int. Conf. on Solidification Processing, H. Jones, ed., The University of Sheffield, Sheffield, United Kingdom, 2007, pp. 685–89.
5. A.B. Phillion, S.L. Cockroft, and P.D. Lee: Acta Mater., 2008, vol. 56, pp. 4328–38.10.1016/j.actamat.2008.04.055 ↗
6. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1511–19.10.1007/s11661-007-9169-7 ↗
7. Y.M. Won, T.J. Yeo, D.J. Seol, and K.H. Oh: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 779–94.10.1007/s11663-000-0115-y ↗
8. T.W. Clyne and G.J. Davies: Solidification and Casting of Metals, TMS, Warrendale, PA, 1977, pp. 275–78.
9. N.N. Prokhorov: Russ. Cast. Prod., 1962, vol. 2, pp. 172–75.
10. A. Yamanaka, K. Nakajima, K. Yasumoto, H. Kawashima, and K. Nakai: Proc. 5th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes, M. Rappaz, M.R. Ozgu, and K.W. Mahin, eds., TMS, Warrendale, PA, 1991, pp. 279–84.
11. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–56.10.1007/s11661-999-0334-z ↗
12. O. Cerri: Doctoral Thesis, Mines-ParisTech, Sophia Antipolis, France, 2007, http://pastel.paristech.org/
13. O. Cerri, Y. Chastel, and M. Bellet: ASME J. Eng. Mater. Technol., 2008, vol. 130, pp. 1–7.
14. http://www.transvalor.com/thercast_gb.php, 2009.
15. M. Bellet, O. Jaouen, and I. Poitrault: Int. J. Num. Methods Heat Fluid Flow, 2005, vol. 15, pp. 120–42.10.1108/09615530510578410 ↗
16. M. Bellet and V.D. Fachinotti: Comput. Methods Appl. Mech. Eng., 2004, vol. 193, pp. 4355–81.10.1016/j.cma.2003.11.016 ↗
17. M. Bobadilla, B. Chamont, C. Gatellier, and J.M. Jolivet: European Technical Report, Convention 7210-CA/316, RE 88/023, 1988.
18. M. Wintz, M. Bobadilla, and J. Lehmann: Proc. 4th Decennial Int. Conf. on Solidification Processing, J. Beech and H. Jones, eds., The University of Sheffield, Sheffield, United Kingdom, 1997, pp. 226–29.
19. M. Wintz, M. Bobadilla, and J.M. Jolivet: La Rev. Métall., 1994, vol. 4, pp. 105–14.10.1051/metal/199491010105 ↗
20. Y.M. Won, H.N. Han, T.J. Yeo, and K.H. Oh: ISIJ Int., 2000, vol. 40, pp. 129–36.10.2355/isijinternational.40.129 ↗
21. K. Wünnenberg and R. Flender: Ironmaking and Steelmaking, 1985, vol. 12, pp. 22–29.
22. V.N. Saveiko: Russ. Cast. Prod., 1961, vol. 11, pp. 453–56.
23. J.C. Borland: Br. Weld. J., 1960, vol. 7, pp. 508–12.