journal article·2013-10Open access

The Effect of Aging on the Relaxation of Residual Stress in Cast Aluminum

Larry A. Godlewski, Xuming Su, Tresa M. Pollock, John E. Allison

Abstract

Most cast aluminum-engineered components are water quenched after the solution-treatment cycle of the casting process. This rapid water quenching has the potential to induce high residual stresses in regions of the castings. Reducing the amount of residual stress can have a promising effect on the life of the component. This study was conducted to quantify how aging affects the amount of residual stress in an aluminum casting. An engineered high residual stress test sample and quenching technique has been developed, and a relaxation study has been completed. The study focused on four different temperatures: 463 K, 493 K, 513 K, and 533 K (190 °C, 220 °C, 240 °C, and 260 °C) and a range of aging times (0.3 to 336 hours). The aging data were used to verify a stress relaxation model. The results indicated that as the aging temperature increased, the amount of relaxation of the residual stress increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. David D. Hall and Iassam Mudawar: Int. J. Heat Mass Transfer, 1996, vol. 39 pp 81-95.10.1016/S0017-9310(96)85008-3 ↗
2. M. Tiryakioglu: Paper No. MF99-219, SME, Dearborn, MI, 1999.
3. M.L. Newman, B.J. Robinson, H. Sehitoglu, and J.A. Danzig: Metall. Trans A, 2003, Vol. 34A, pp. 1483-91.10.1007/s11661-003-0260-4 ↗
4. J.S. Robinson and D.A. Tanner: Materials Science Forum, 2002, vol. 40-407, pp. 355-360.10.4028/www.scientific.net/MSF.404-407.355 ↗
5. Webster, G.A.: Materials Science Forum, 2000, vol. 347-349, pp. 1-9.10.4028/www.scientific.net/MSF.347-349.1 ↗
6. A. Wedgewood: Materials World, 1995 Jan., vol .3(1) pp. 5–7.
7. R.C. Dorward: Journals of Mater. Proc. Tech., 1997, vol. 66, pp. 25-29.10.1016/S0924-0136(96)02456-9 ↗
8. J.S. Robinson and D.A. Tanner: Journal of Engineering Materials and Technology, 2008, vol. 130, 031003-1.10.1115/1.2931150 ↗
9. D.A. Tanner and J.S. Robinson: Materials and Design, 2008, vol. 29, pp. 1489-1496.10.1016/j.matdes.2007.07.002 ↗
10. G.P. Donlan and J.S. Robinson: Journal of Materials Processing Technology, 2004, vol 153, pp. 346-351.10.1016/j.jmatprotec.2004.04.065 ↗
11. J.S. Robinson, S. Hossain, C.E. Truman, A.M. Paradowska, D.J. Hughes, R.C. Wimpy and M.E. Fox: Materials Science and Engineering, 2010, vol. A527, pp.2603-2612.10.1016/j.msea.2009.12.022 ↗
12. F. Carreno and O. Ruano: Materials Science and Engineering, 1996, vol. A214, pp. 177-180.10.1016/0921-5093(96)10406-8 ↗
13. S. Denis, P. Archambault, E. Gautier, A. Simon and G. Beck: Materials Science Forum, 2000, vol. 347-349, pp. 184-89.10.4028/www.scientific.net/MSF.347-349.184 ↗
14. D. Walker: Advanced Materials & Processes, 2001 Aug., vol. 159(8), pp. 30–33.
15. Y.C. Lam and K.S. Lian: Theoretical and Applied Fracture Mech., 1989, vol. 12, pp. 59-66.10.1016/0167-8442(89)90015-3 ↗
16. M. Kovac: Journal of Materials Processing Tech., 1995, vol. 52, pp. 503-14.10.1016/0924-0136(94)01733-H ↗
17. G. Roy, M. Braid, and G. Shen: Computers and Structures, 2003, vol. 81, pp. 929-35.10.1016/S0045-7949(02)00478-9 ↗
18. M. Deqennoy, M. Ouaftouh and M. Ourak: Ultrasonics, 1999, vol. 37, pp. 365-72.10.1016/S0041-624X(99)00009-8 ↗
19. M. Landa and J. Plesek: Ultrasonics, 2002, vol. 40, pp. 531-35.10.1016/S0041-624X(02)00180-4 ↗
20. S Rasouli Yazdi, D. Retraint, and J Lu: J. Strain Anal., 1998, vol.33, pp. 449-58.10.1243/0309324981513147 ↗
21. R.A. Owen, R.V. Preston, P.J. Withers, H.R. Shercliff and P.J. Webster: Mats. Science. & Eng., 2003, vol. A346, pp. 159-67.10.1016/S0921-5093(02)00547-6 ↗
22. A. Lodini: Radiation Physics and Chemistry, 2001, vol. 61, pp. 227-233.10.1016/S0969-806X(01)00245-6 ↗
23. P. Auburtin and N. Mortin: Mecanique & Industries, 2003, vol. 4, pp. 319-325.
24. Lacarac, V., Smith, D.J., & Pavier M.J. : AIAA Journal, vol.42 No7 July 2004 pp.1444-1448.10.2514/1.10427 ↗
25. M. Last, G. Luta, A. Orso, and S. Young,: Computational Statistics and Data Analysis 2008, vol. 52 pp. 5215-5228.10.1016/j.csda.2008.04.024 ↗
26. C.A. Cloutier, and J.W. Jones: Society Automotive Engineers Paper, 2000-01-0759.
27. S.C. Weakley-Bollin, W. Donlon, C. Wolverton, J.W. Jones and J.E. Allison: Metall. Mater. Trans A, 2003, vol. 34A, pp. 5137–2418.
28. R. Jahn, W. Donlon, and J.E. Allison: Automotive Alloys III (PDF Only Version), 1999, TMS, Warrendale, PA, pp. 247–64. Available via http://doc.tms.org/Site/Products.nsf.
29. J. Boileau, C. Cloutier, L.A. Godlewski, P.A. Reeber-Symanski, C. Wolverton, and J.E. Allison: Paper No. 03M-168, SAE, Warrendale, PA, 2003.
30. H. Sehitoglu, X. Qing, T. Smith, H. J. Maier and J. Allison : Metall. Trans A, 2000, vol. 31A, pp. 139-151.10.1007/s11661-000-0060-z ↗
31. C.C. Engler-Pinto Jr., H Sehitoglu and H. J. Maier: Thermomechanical Fatigue Behavior of Materials, 4th ed., ASTM International, West Conshohocken, PA, 2003.
32. K. Ishikawa, M. Maehara and Y. Kobayashi : Mats. Sci. & Eng A, 2002, vol. A322, pp.153-58.10.1016/S0921-5093(01)01128-5 ↗
33. S. Spigarelli, E. Evangelista and S. Cucchieri : Mats. Sci. & Eng A, 2004, vol. A387-389, pp.702-05.10.1016/j.msea.2004.06.043 ↗