Mechanical behavior and damage kinetics in nodular cast iron: Part I. Damage mechanisms
Source abstract
Abstract
Numerous authors consider that in nodular cast iron, the interface between the graphitic nodule and the α-matrix is so weak that nucleation appears suddenly at the beginning of plastic strain. Nevertheless, the present experimental study indicates that the nucleation of voids is a continuous process as a function of the imposed mechanical parameters (Σ m , ɛ peq ). This result is explained in terms of interaction effects between closely spaced particles. A critical parameter for interaction is determined. Growth kinetics are also investigated and comparison with the Gurson-Tvergaard law allows identification of the q1 and q2 parameters of the potential. A critical void volume fraction f c is finally defined and is shown to depend on the stress triaxiality level. At last, the role of the various microstructural heterogeneity levels on the damage kinetics is emphasized. Then, it is clearly demonstrated that all these heterogeneity levels must be considered to estimate a critical interfacial stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. M.J. Dong, C. Prioul, and D. Francois: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2245–54.10.1007/s11661-997-0182-7 ↗
2. D. Steglich and W. Brocks: Computational Mater. Sci., 1997, vol. 7, pp. 7–17.10.1016/S0927-0256(97)00053-0 ↗
3. A.S. Argon and J. Im: Metall. Trans. A, 1975, vol. 6A, pp. 839–51.10.1007/BF02672307 ↗
4. A.S. Argon, J. Im, and A. Needleman: Metall. Trans. A, 1975, vol. 6A, pp. 815–24.10.1007/BF02672305 ↗
5. F.M. Beremin: Metall. Trans. A, 1981, vol. 12A, pp. 723–32.10.1007/BF02648336 ↗
6. T. Mori and K. Tanaka: Acta Metall., 1973, vol. 21, pp. 571–74.10.1016/0001-6160(73)90064-3 ↗
7. M. Berveiller and A. Zaoui: J. Mech. Phys., 1979, vol. 26, pp. 324–44.
8. A. Brownrigg, W.A. Spitzig, O. Richmond, D. Teirlinck, and J.D. Embury: Acta Metall., 1983, vol. 31, pp. 1141–50.10.1016/0001-6160(83)90176-1 ↗
9. J. Huez, X. Feaugas, A.L. Helbert, I. Guillot, and M. Clavel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1615–26.10.1007/s11661-998-0085-2 ↗
10. A. Bhattacharyya and G.J. Weng: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2359–65.10.1007/BF02651890 ↗
11. A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6A, pp. 825–37.10.1007/BF02672306 ↗
12. C.C. Chu and A. Needleman: J. Eng. Mater. Technol., 1980, vol. 102, pp. 249–56.10.1115/1.3224807 ↗
13. F.A. McClintock: J. Appl. Mech., 1968, vol. 35, pp. 363–71.10.1115/1.3601204 ↗
14. J.R. Rice and D.M. Tracey: J. Mech. Phys. Solids, 1969, vol. 17, pp. 201–17.10.1016/0022-5096(69)90033-7 ↗
15. P. Gilormini, C. Licht, and P. Suquet: Arch. Mech., 1988, vol. 40, pp. 43–80.
16. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
17. V. Tvergaard: Int. J. Fract., 1981, vol. 17, pp. 389–407.10.1007/BF00036191 ↗
18. P.F. Thomason: Acta Metall., 1985, vol. 33, pp. 1029 and 1987.
19. G. Perrin and J.B. Leblond: Int. J. Plast., 6, pp. 677–99 (1990).10.1016/0749-6419(90)90039-H ↗
20. H. Margolin, J.C. Williams, J.C. Chesnutt, and G. Lütjering: Titanium ’80, Science and Technology, H. Kimura and O. Izumi, eds., Metallurgical Society of AIME, Warrendale, PA, 1980, vol. 1, pp. 169–216.
21. A.L. Helbert, X. Feaugas, and M. Clavel: Acta Metall., 1998, vol. 46, pp. 939–51.
22. P.J. Wray, O. Richmond, and H.L. Morrison: Metallography, 1983, vol. 16, pp. 39–58.10.1016/0026-0800(83)90043-5 ↗
23. W.A. Spitzig, J.F. Kelly, and O. Richmond: Metallography, 1985, vol. 18, pp. 235–61.10.1016/0026-0800(85)90045-X ↗
24. P. Joly: Ph.D. Thesis, Ecole Nationale des Mines de Paris, Paris, 1992.
25. P. Achon, J.C. Ehrstrom, and A. Pineau: J. Phys. IV, 1996, vol. C6, pp. 3–12.
26. M. Wessen and I.L. Svensson: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2209–20.10.1007/BF02651875 ↗
27. C. Guillemer-Neel: Ph.D. Thesis, Universite de Technologie de Compiègne, Compiègne, 1999.
28. P. Dierickx: Ph.D. Thesis, INSA, Lyon, 1996.
29. M. Baihe, F. Keming, F. Weimin, and L. Guoxon: Acta Metall., 1990, vol. 38, pp. 2167–74.10.1016/0956-7151(90)90084-T ↗
30. C. Guillemer-Neel, X. Feaugas, and C. Clavel: Metall. Mater. Trans. A, vol. 31A, 2000, pp. 3075–85.10.1007/s11661-000-0086-2 ↗
31. J.L. Chaboche: in Unified Constitutive Laws of Plastic Deformation, A.S. Krausz and K. Krausz, Academic Press, New York, NY, 1996, pp. 1–68.
32. P. Pilvin: Ph.D. Thesis, Université Pierre et Marie Curie, Paris, 1990.
33. R. Foerch, J. Besson, G. Cailletaud, and P. Pilvin: Comp. Meth. Appl. Mech. Eng., 1997, vol. 141, pp. 355–72.10.1016/S0045-7825(96)01111-5 ↗
34. A.L. Helbert, X. Feaugas, and M. Clavel: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3043–58.10.1007/BF02663853 ↗
35. P. Dierickx, C. Verdu, A. Reynaud, and R. Fougeres: Scripta Metall., 1996, vol. 34, pp. 261–68.10.1016/1359-6462(95)00496-3 ↗
36. J.D. Eshelby: Proc. R. Soc., London, 1957, vol. 241, pp. 376–96.10.1098/rspa.1957.0133 ↗
37. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971, vol. 23, pp. 1185–1200, 1971, ibid 23, pp. 1201–23.10.1080/14786437108217405 ↗
38. O. Hubert: Ph.D. Thesis, Universite de Technologie de Compiègne, Compiègne, France, 1998.
39. D.F. Watt, X.Q. Xu, and D.J. Llyod: Acta Metall., 1996, vol. 44, pp. 789–99.
40. M.E. Mear and J.W. Hutchinson: Mech. Mater., 1985, vol. 4, pp. 395–407.10.1016/0167-6636(85)90035-3 ↗
41. B. Marini, F. Mudry, and A. Pineau: Eng. Fract. Mech., 1985, vol. 22, pp. 989–96.10.1016/0013-7944(85)90038-4 ↗
42. M. Kuna and D.Z. Sun: J. Phys. III, 1996, vol. 6, pp. 113–22.
43. D. Steglich and W. Brocks: Fat. Fract. Eng. Mater. Struct., 1998, vol. 21, pp. 1175–88.10.1046/j.1460-2695.1998.00078.x ↗
44. Y.Q. Sun, J.M. Detraux, G. Touzot, and D. Francois: Mem. Sci. Rev. Met., 1983, pp. 183–95.
45. Z.L. Zhang and E. Niemi: Int. J. Fract., 1995, vol. 70, pp. 321–33.10.1007/BF00032450 ↗
46. A. Benzerga, J. Besson, and A. Pineau: Engng. Mater. Tech., vol. 121, 1999, pp. 212–29.
47. F. Mudry: Ph.D. Thesis, Ecole Nationale des Mines de Paris, Paris, 1982.
48. K.T. Conlon and D.S. Wilkinson: IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials, A. Pineau and A. Zaoui, eds., Kluwer Academic Publishers, Netherlands, 1996, pp. 347–54.10.1007/978-94-009-1756-9_43 ↗
49. D.S. Wilkinson and J.D. Embury: IUTAM Symp. on Micromechanics of Plasticity and Damage of Multiphase Materials, A. Pineau and A. Zaoui, eds., Kluwer Academic Publishers, Netherlands, 1996, pp. 271–78.10.1007/978-94-009-1756-9_34 ↗
50. D.S. Wilkinson, E. Maire, and J.D. Embury: Mater. Sci. Eng., 1997, vol. A233, pp. 145–54.10.1016/S0921-5093(97)00059-2 ↗
51. S.F. Corbin and D.S. Wilkinson: Acta Metall., 1994, vol. 42, pp. 1311–18 and pp. 1319–27.10.1016/0956-7151(94)90147-3 ↗