journal article·2002-02

Observations, theories, and predictions of high-temperature creep behavior

B. Wilshire

Publisher page

Abstract

The key observations that have underpinned traditional power-law approaches to creep mechanism identification have been re-evaluated, using information obtained for aluminum, copper, and 0.5Cr0.5Mo0.25V steel. In particular, stress/creep rate plots produced over extended stress ranges for all three materials are shown to be well represented by continuous curves, contradicting the common assumption that different creep mechanisms are dominant over different stress/temperature regimes. Evidence is also introduced to demonstrate that the theoretical and practical limitations of power-law descriptions of steady-state creep rates can be overcome by quantifying the shapes of normal creep curves and the variations in curve shape with changing test conditions. In this way, the behavior patterns displayed by pure metals and particle-hardened alloys can be interpreted in terms of the deformation processes controlling creep-strain accumulation and the damage/degradation processes causing the creep rate to accelerate into the tertiary stages that usually precede fracture. Moreover, the superior predictive capabilities of curve shape analysis are then illustrated by results showing that short-term property values can be extrapolated to provide accurate long-term engineering design data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. I.S. Servi and N.J. Grant: J. Met., 1951, vol. 191, pp. 909–16.
2. J.G. Harper and J.E. Dom: Acta Metall., 1957, vol. 5, pp. 654–65.10.1016/0001-6160(57)90112-8 ↗
3. J.G. Harper, L.A. Shepard, and J.E. Dorn: Acta Metall., 1958, vol. 6, pp. 509–18.10.1016/0001-6160(58)90114-7 ↗
4. C.R. Barrett, E.C. Muehleisen, and W.D. Nix: Mater. Sci. Eng., 1972, vol. 10, pp. 33–42.10.1016/0025-5416(72)90063-8 ↗
5. A.J. Ardell and S.S. Lee: Acta Metall., 1986, vol. 34, pp. 2411–23.10.1016/0001-6160(86)90144-6 ↗
6. H. Luthy, A.K. Miller, and O.D. Sherby: Acta Metall., 1988, vol. 28, pp. 169–78.10.1016/0001-6160(80)90066-8 ↗
7. J.D. Parker and B. Wilshire: Phil. Mag., 1980, vol. 41, pp. 665–80.10.1080/01418618008239341 ↗
8. E.H. Aigeltinger and R.C. Gifkins: J. Mater. Sci., 1975, vol. 10, pp. 1889–1903.10.1007/BF00754479 ↗
9. O.A. Ruano, J. Wadsworth, and O.D. Sherby: Acta Metall., 1988, vol. 36, pp. 1117–28.10.1016/0001-6160(88)90165-4 ↗
10. B. Wilshire: 4th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, B. Wilshire and R.W. Evans, eds., The Institute of Materials, London, 1990, pp. 1–9.
11. B. Burton and G.L. Reynolds: Mater. Sci. Eng., 1995, vol. A191, pp. 135–41.10.1016/0921-5093(94)09643-0 ↗
12. G.L. Greenwood: Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 413–23.
13. J. Wadsworth, O.A. Ruano, and O.D. Sherby: Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 425–39.
14. B. Wilshire: Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., Warrendale, PA, 1999, pp. 451–60.
15. K.R. McNee, G.W. Greenwood, and H. Jones: Scripta Mater., 2001, vol. 44, pp. 351–57.10.1016/S1359-6462(00)00570-4 ↗
16. F.R.N. Nabarro: Report on Conf. on Strength of Solids, The Physical Society, London, 1948, pp. 75–87.
17. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 437–45.10.1063/1.1699681 ↗
18. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
19. R.W. Evans and B. Wilshire: Creep of Metals and Alloys, The Institute of Metals, London, 1985.
20. F.A. Mohamed and T.J. Ginter: Acta Metall., 1982, vol. 30, pp. 1869–81.10.1016/0001-6160(82)90027-X ↗
21. B. Burton: Phil. Mag., 1972, vol. 25, pp. 645–59.10.1080/14786437208228897 ↗
22. W. Blum and W. Maier: Phys. Status Solidi, 1999, vol. 171a, pp. 467–74.10.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
23. K.R. McNee, H. Jones, and G.W. Greenwood: 19th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, J.D. Parker, ed., The Institute of Materials, London, 2001, pp. 185–95.
24. B. Burton and G.W. Greenwood: Met. Sci. J., 1970, vol. 4, pp. 215–18.10.1179/msc.1970.4.1.215 ↗
25. B. Burton and G.W. Greenwood: Acta Metall., 1970, vol. 18, pp. 1237–42.10.1016/0001-6160(70)90153-7 ↗
26. B. Wilshire and C.J. Palmer: Scripta Mater., 2001, in press.
27. C.R. Barrett, J.L. Lytton, and O.D. Sherby: Trans. AIME, 1967, vol. 239, pp. 170–80.
28. E.R. Parker: Trans. ASM, 1958, vol. 50, pp. 52–104.
29. P. Feltham and J.D. Meakin: Acta Metall., 1959, vol. 7, pp. 614–27.10.1016/0001-6160(59)90131-2 ↗
30. Z. Kowalewski: Arch. Met., 1992, vol. 37, pp. 65–76.
31. D. Hansen: Trans. AIME, 1939, vol. 133, pp. 15–57.
32. P. Shahinian and J.R. Lane: Trans. ASM, 1953, vol. 45, pp. 177–99.
33. F. Garofalo, W.F. Domis, and F. van Gemmingen: Trans. TMS-AIME, 1964, vol. 230, pp. 1460–67.
34. D.G. Morris: Met. Sci. J., 1978, vol. 12, pp. 19–29.10.1179/msc.1978.12.1.19 ↗
35. S.L. Mannan and P. Rodriques: Met. Sci. J., 1983, vol. 17, pp. 63–69.10.1016/0036-9748(83)90071-6 ↗
36. R.W. Evans and B. Wilshire: Introduction of Creep, The Institute of Materials, London, 1993.
37. M. Pahutova, J. Cadek, and P. Rys: Phil. Mag., 1971, vol. 23, pp. 509–17.10.1080/14786437108216401 ↗
38. R.W. Evans, J.D. Parker, and B. Wilshire: Recent Advances in Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D.R.J. Owen, eds., Pineridge Press, Swansea, 1982, pp. 135–84.
39. K.R. Williams and B. Wilshire: Met. Sci. J., 1975, vol. 7, pp. 176–79.10.1179/030634573790445695 ↗
40. J.D. Parker and B. Wilshire: Met. Sci., 1975, vol. 9, pp. 248–52.10.1179/030634575790445053 ↗
41. E. Arzt: Res. Mech., 1991, vol. 31, pp. 399–453.
42. C.N. Ahlquist and W.D. Nix: Acta Metall., 1971, vol. 19, pp. 373–85.10.1016/0001-6160(71)90105-2 ↗
43. J.C. Gibeling and W.D. Nix: Met. Sci. J., 1977, vol. 11, pp. 453–57.10.1179/msc.1977.11.10.453 ↗
44. M.E. Kassner: Mater. Sci. Eng., 1993, vol. A166, pp. 81–88.10.1016/0921-5093(93)90312-3 ↗
45. R.L. Orr, O.D. Sherby, and J.E. Dom: Trans. ASM., 1954, vol. 46, pp. 113–28.
46. R.J. Brown, B.J. Cane, J.D. Parker, and D.J. Walters: Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D.R.J. Owen, eds., Pineridge Press, Swansea, 1981, pp. 645–57.
47. R.W. Evans and B. Wilshire: Unified Constitutive Laws of Plastic Deformation, A.S. Krausz and K. Krausz, eds., Academic Press, New York, NY, 1996, pp. 107–52.10.1016/B978-012425970-6/50004-7 ↗