journal article·2002-05

Interrupted boriding of medium-carbon steels

P. Gopalakrishnan, S. S. Ramakrishnan, P. Shankar, M. Palaniappa

Publisher page

Abstract

The results of an extensive study on the microstructure, microhardness, corrosion, and tensile properties of continuously borided and interrupted borided specimens of medium-carbon steel are compared. Carbon repartitioning away from the surface is one of the principal modes to accommodate the high strains introduced on boron diffusion into the case. However, this is a kinetically constrained process and is more predominant on interrupted boriding. The effect of such a carbon redistribution is to result in microstructural modifications including (1) blunting of boride needle tips, (2) precipitation of nearly spherical and fine borocarbides, and (3) enhanced carbon segregation at the boride needle/steel matrix interface on interrupted boriding. The mechanisms aiding the change in the morphology of the boride needles are discussed. The improvements in the mechanical and corrosion properties of the interrupted borided specimens over continuously borided specimens are described.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. G.V. Karpenko, V.I. Pokhmurovskii, V.B. Dalisov, and V.S. Zamikhovskii: Influence of Diffusion Coatings on the Strength of Steel. Trans Tech Publications, Aedermansdorf, Switzerland, 1979, pp. 19–37.
2. J. Subramanyam: Met. News., 1986, vol. 8, pp. 3–7.
3. C.H. Faulkner: Advanced Materials and Processes, vol. 4, 1999, p. H 43.
4. N.G. Kaidash and V.I. Pokhmurskii: Sov. Mater: Sci., 1965, vol. 1, pp. 487–89.10.1007/BF00715231 ↗
5. V.I. Pokhmurskii, R.G. Vagula, Y.S. Gribovskii, and V.S. Zamikhovskii: Protective Coatings on Metals, Plenum Publishing Corp., New York, NY, 1973, vol. 5, pp. 236–39.
6. C. Badini, C. Gianoglio, and G. Pradelli: Metall. Italiana, 1987, vol. 79 (10), pp. 747–56.
7. D.N. Tispas and J. Rus: J. Mater. Sci. Lett., 1987, vol. 6, pp. 118–20.10.1007/BF01729451 ↗
8. M.R.S. John and A.F. Sammels: J. Mater. Sci. Lett., 1981, vol. 16, pp. 2327–29.
9. Y.A. Alimov: Protective Coatings on Metals, Oxonian Press Pvt. Ltd. New Delhi, 1986, vol. 8, pp. 83–85.
10. D.N. Tsipas, J. Rus, and H. Noguerra: Conf. Proc., Heat Treatment ’87. The Institute of Metals. London, May 11–15, 1988, pp. 203–10.
11. A.G. Von Matuschka: Boronizing, Heyden and Son Inc., Philadelphia, PA, 1980, p. 23.
12. A.P. Epik: Boron and Refractory Borides, Matkovich, Springer-Verlag, Berlin, 1977, pp. 597–611.10.1007/978-3-642-66620-9_32 ↗
13. G.I. Belyaeva, S.N. Stotskaya, N.G. Ilyushchenko, A.I. Anfinogenov, and I.G. Kagan: Protective Coatings on Metals, Oxonian Press Pvt. Ltd. New Delhi, 1986, vol. 8, pp. 61–66.
14. H.C. Fiedler and Richard J. Sieraski: Met. Progr., 1971, Feb., pp. 101–07.
15. A.V. Byakhova, V.F. Loskutov, V.G. Permyakov, A.M. Pogosyan, and I.K. Trush: Prot. Coatings Met., 1986, vol. 12, pp. 72–75.
16. Seong Ho Han and John S. Chun: J. Mater. Sci., vol. 15, 1980, p. 1379.10.1007/BF00752117 ↗
17. A. Ozsoy and Y.M. Yaman: Scripta Metall. Mater., 1993, vol. 29, pp. 231–36.10.1016/0956-716X(93)90314-I ↗
18. K. Matiasovsky, M. Cherenkova-Paucirova, P. Fellner, and M. Makyta Surface Coating Technol., 1988, No. 35, pp. 133–49.10.1016/0257-8972(88)90064-3 ↗
19. L.L. Qian and G.A. Stone: J. Mater. Eng. Performance, 1995, vol. 4 (1), pp. 59–62.10.1007/BF02682706 ↗
20. T.S. Eyre: Wear, 1975, vol. 34, pp. 383–87.10.1016/0043-1648(75)90105-2 ↗
21. D.N. Tsipas and C.P. Perez: J. Mater. Sci. Lett., 1982, No. 1, pp. 298–99.10.1007/BF00728859 ↗
22. P. Goeuriot, F. Thevenot, and J.H. Driver: Thin Solid Films, 1981, vol. 78, pp. 67–76.10.1016/0040-6090(81)90418-1 ↗
23. L.S. Lyakhovich: Protective Coating on Metals, Amerind Publishing Co. Pvt. Ltd. New Delhi, 1984, vol. 6, pp. 83–90.
24. G. Palombarini and M. Carbucicchio: J. Mater. Sci. Lett., 1984, vol. 3, pp. 792–94.10.1007/BF00727975 ↗
25. L.S. Lyakhovich and S.S. Bragilevskaya: Protective Coating on Metals, Plenum Publishing Corp., New York, NY, 1970, vol. 2, pp. 123–27.
26. N.G. Kaidash, P.P. Chastokolenko, V.S. Tatarchuk, L.A. Semeneko, A.A. Parlyukor, and G.A. Bovkun: Prot. Coating Met., Plenum Publishing Corp., New York, NY, 1972, vol. 4, pp. 149–55.
27. C.H. Xu, J.K. Xi, and W. Gao: Scripta Mater., 1996, vol. 34 (3), pp. 455–61.10.1016/S0956-716X(95)00541-3 ↗
28. P.A. Molian and H.S. Rajasekhra: Surf. Eng., 1986, vol. 2 (4), p. 269.10.1179/sur.1986.2.4.269 ↗
29. P. Gopalakrishnan, P. Shankar, R.V. Subba Rao, M. Sundar, and S.S. Ramakrishnan: Scripta Mater., 2001, vol. 44, pp. 701–12.10.1016/S1359-6462(00)00651-5 ↗
30. G.F. Carter: Principles of Physical and Chemical Metallurgy. ASM, Metals Park, OH, 1979, p. 243.
31. Paul E. Busby and Cyril Wells: Trans. AIME. J. Met., 1954, vol. 200, p. 972.
32. C.M. Brakman, A.W.J. Gommers, and E.J. Mittemeijer: J. Mater. Res., vol. 4 1989, p. 1364.10.1557/JMR.1989.1354 ↗
33. I.S. Koifman, T.V. Egorshina, and G.V. Laskova: Metall. Term. Obr. Metall., 1969, No. 2, pp. 59–60.
34. V. Raghavan: Monograph Series on Alloy Phase Diagrams. Indian Institute of Metals. 1992, pp. 287–96.