In-situ observation of the precipitation of manganese sulfide in low-carbon magnesium-killed steel
Source abstract
Abstract
The in-situ observation of MnS precipitation was made on cooling using a confocal laser microscope. It was found that two types of precipitates appeared at the different temperatures. The first type precipitated at the nucleation sites of MgO or MnO-TiOx inclusions in γ-Fe in the temperature range between 1500 and 1200 K. The shape was triangular or rodlike, and the size was between 1 and 5 µm. The second type of MnS drastically precipitated in α-Fe at 1100 K just after the Ar3 transformation. The shape was triangular or polygonal, and the size was between 0.1 and 0.5 µm, much smaller than that of the first type. No significant precipitation was observed in the intermediate temperature range between 1200 and 1100 K. The reasons why MnS precipitation took place twice at the different temperature ranges and why no precipitation occurred between the two temperature ranges were discussed from the thermodynamic and kinetic viewpoints. The diffusion coefficients of Mn in γ-and α-Fe and the supercooling are the key factors which explain the reason.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Y. Ueshima, H. Yuyama, S. Mizoguchi, and H. Kajioka: Tetsu-to-Hagané, 1989, vol. 75, pp. 501–08.10.2355/tetsutohagane1955.75.3_501 ↗
2. J. Takamura and S. Mizoguchi: Proc. 6th Int. Iron and Steel Congress, IISC, Nagoya, Japan, 1990, vol. 1, pp. 591–604.
3. M. Wako, T. Sawai, and S. Mizoguchi: Tetsu-to-Hagané, 1992, vol. 78, pp. 1697–1704.10.2355/tetsutohagane1955.78.11_1697 ↗
4. H. Goto, K. Miyazawa, and T. Kadoya: Tetsu-to-Hogané, 1995, vol. 81, pp. 117–22.10.2355/tetsutohagane1955.81.2_117 ↗
5. M. Wako, T. Sawai, and S. Mizoguchi: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 1014–21.10.2355/isijinternational.36.1014 ↗
6. N. Yuki, H. Shibata, and T. Emi: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 317–23.10.2355/isijinternational.38.317 ↗
7. S. Kimura, Y. Nabeshima, K. Nakajima, and S. Mizoguchi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 1013–21.10.1007/s11663-000-0077-0 ↗
8. S. Kimura, K. Nakajima, and S. Mizoguchi: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 79–85.10.1007/s11663-001-0010-1 ↗
9. H. Yin, H. Shibata, T. Emi, and M. Suzuki: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 936–45.10.2355/isijinternational.37.936 ↗
10. H. Shibata, H. Yin, S. Yoshinaga, T. Emi, and M. Suzuki: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 149–56.10.2355/isijinternational.38.149 ↗
11. Y. Ueshima, K. Isobe, S. Mizoguchi, H. Maede, and H. Kajioka: Tetsu-to-Hagané, 1988, vol. 74, pp. 465–72.10.2355/tetsutohagane1955.74.3_465 ↗
12. Y. Ueshima, Y. Sawada, S. Mizoguchi, and H. Kajioka: Metall. Trans. A, 1989, vol. 20A, pp. 1375–83.10.1007/BF02665495 ↗
13. K. Nohara and K. Hirano: Proc. Int. Conf. Sci. & Technol. Iron & Steel, Tokyo, 1970, Sect. 6, pp. 1267–73.
14. J.S. Kirkaldy, P.N. Smith, and R.C. Sharma: Metall. Trans., 1973, vol. 4, pp. 624–25.10.1007/BF02648721 ↗
15. J.H. Swisher: Trans. AIME, 1967, vol. 239, pp. 110–13.
16. M.G. Seibel: Mem. Sci. Rev. Met., 1964, vol. 61, pp. 413–36.
17. E.T. Turkdogan, S. Ignatowicz, and J. Pearson: J. Iron Steel Inst., 1955, vol. 180, pp. 349–54.
18. H.A. Wriedt and Hsun Hu: Metall. Trans. A, 1976, vol. 7A, pp. 711–18.10.1007/BF02646480 ↗
19. H. Hasegawa, K. Nakajima, and S. Mizoguchi: Tetsu-to-Hagané, 2001, vol. 87, p. 700–06.10.2355/tetsutohagane1955.87.11_700 ↗
20. H. Hasegawa, K. Nakajima, and S. Mizoguchi: Tetsu-to-Hagané, 2001, vol. 87, pp. 433–40.10.2355/tetsutohagane1955.87.6_433 ↗