journal article·2019-03-15

Effect of Composition on the Strength and Electrical Conductivity of Cu-Ti Binary Alloy Wires Fabricated by Aging and Intense Drawing

Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi, Sueng Zeon Han, Naoya Masahashi

Publisher page

Abstract

The strength and electrical conductivity of Cu-Ti alloy wires fabricated by over-aging and intense drawing were investigated as a function of Ti content (2.7 to 4.3 at. pct). The microstructure of all over-aged Cu-Ti alloys before drawing showed mainly coarse cellular components laminating the plates of a terminal Cu solid solution and a β-Cu4Ti intermetallic compound precipitated discontinuously by grain boundary reactions. The volume fraction of β-Cu4Ti plates increased with Ti content, although the compositions of the two phases remained unchanged. When the over-aged alloys were drawn to the same deformation strain, the hardness and tensile strength of the wires increased monotonically with Ti content due to strain-induced strengthening; a high volume fraction of hard β-Cu4Ti fibers formed from laminating plates during drawing promoted a high dislocation density in the matrix. The electrical conductivity of the wires decreased gradually with Ti content due to the higher volume fraction of β-Cu4Ti fibers and due decomposition of the fibers during drawing. The overall performance of the Cu-Ti alloy wires improved as the Ti content increased and was superior to that of conventional Cu-Ti alloy wires fabricated by peak-aging and drawing, and to that of commercial Cu-Be alloy wires.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A. Datta and W.A. Soffa: Acta Metall., 1976, vol. 24, pp. 987–1001.10.1016/0001-6160(76)90129-2 ↗
2. S. Nagarjuna, M. Srinivas, K. Balasubramanian, and D. S. Sarma: Acta Metall., 1996, vol. 44, pp. 2285–2293.
3. A.A. Hameda and L. Blaz: Mater. Sci. Eng. A, 1998, vol. 254, pp. 83–89.10.1016/S0921-5093(98)00753-9 ↗
4. C. Borchers: Philos. Mag. A., 1999, vol. 79, pp.537–547.10.1080/01418619908210315 ↗
5. W.A. Soffa and D. E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 347–366.10.1016/S0079-6425(03)00029-X ↗
6. D. Bozic, J. Stasic, J. Ruzic, M. Vilotijevic, and V. Rajkovic: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8139–8144.10.1016/j.msea.2011.07.061 ↗
7. M. Sobhani, A. Mirhabibi, H. Arabi, and R.M.D. Brydson: Mater. Sci. Eng. A, 2013, vol. 577, pp. 16–22.10.1016/j.msea.2013.03.063 ↗
8. J.A. Cornie, A. Datta, and W.A. Soffa: Metal. Trans., 1973, vol. 4, pp. 727–733.10.1007/BF02643081 ↗
9. D.E. Laughlin and J.W. Cahn: Acta Metall., 1975, vol. 23, pp. 329–339.10.1016/0001-6160(75)90125-X ↗
10. L.A. Nesbit and D.E. Laughlin: Acta Metall., 1978, vol. 26, pp. 815–825.10.1016/0001-6160(78)90031-7 ↗
11. W.A. Soffa and D.E. Laughlin: Acta Metall., 1989, vol. 37, pp. 3019–3028.10.1016/0001-6160(89)90338-6 ↗
12. R. Markandeya, S. Nagarjuna, and D.S. Sarma: Mater. Sci. Eng. A, 2004, vol. 371, pp. 291–305.10.1016/j.msea.2003.12.002 ↗
13. I.S. Balta, A. Laik, G.B. Kale, G.K. Dey, and U.D. Kulkami: Mater. Sci. Eng. A, 2005, vol. 402, pp. 118–125.10.1016/j.msea.2005.04.015 ↗
14. S. Semboshi, T. Nishida, H. Numakura, T. Al-Kassab, and R. Kirchheim: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2136–2143.10.1007/s11661-011-0637-8 ↗
15. S. Semboshi, S. Sato, M. Ishikuro, K. Wagatsuma, A. Iwase, and T. Takasugi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3401–3411.10.1007/s11661-014-2293-2 ↗
16. L. Si, L. Zhou, X. Zhu, L. Sanhua, S. Leinuo, and D. Qiyi: Mater. Sci. Eng. A, 2016, vol. 650, pp. 345–353.10.1016/j.msea.2015.10.062 ↗
17. H. Wei, Y. Cui, H. Cui, Y. Wei, and L. Hou: Mater. Sci. Eng. A, 2017, vol. 707, pp. 392–398.10.1016/j.msea.2017.09.072 ↗
18. S. Semboshi, S. Amano, J. Fu, A. Iwase, and T. Takasugi: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1501–1511.10.1007/s11661-016-3949-x ↗
19. S. Semboshi, Y. Kaneno, T. Takasugi, and N. Masahashi: Metall. Mater. Trans. A, 2018, vol. 49, pp. 4956–4964.10.1007/s11661-018-4816-8 ↗
20. R.C. Ecob, J.V. Bee, and B. Ralph: Phys. Status Solidi, 1979, vol. 52A, pp. 201–210.10.1002/pssa.2210520121 ↗
21. R.C. Ecob, J.V. Bee, and B. Ralph: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 1407–1414.10.1007/BF02653496 ↗
22. R.W. Fonda and G.J. Shiflet: Scr. Metall., 1990, vol. 24, pp. 2259–2262.10.1016/0956-716X(90)90075-R ↗
23. R.W. Fonda and G.J. Shiflet: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2507–2518.10.1007/s11661-002-0372-2 ↗
24. A.M. Elwazri, P. Wanjara, and S. Yue: Mater. Sci. Eng. A, 2005, vol. 404, pp. 91–98.10.1016/j.msea.2005.05.051 ↗
25. S.W. Joung, U.G. Kang, S.P. Hong, Y.W. Kim, and W.J. Nam: Mater. Sci. Eng. A, 2013, vol. 586, pp. 171–177.10.1016/j.msea.2013.07.095 ↗
26. Y. Li, D. Raabe, M. Herbig, P.P. Choi, S. Goto, A. Kostka, H. Yarita, C. Borchers, and R. Kirchheim: Phys. Rev. Lett., 2014, vol. 113, pp. 106104.10.1103/PhysRevLett.113.106104 ↗
27. A. Durgaprasad, S. Giri, S. Lenkaa, S. Kundu, S. Mishra, S. Chandra, R.D. Doherty, and I. Samajdra: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4583–4597.10.1007/s11661-017-4269-5 ↗
28. C. Borchers, and R. Kirchheim: Prog. Mater.Sci., 2016, vol. 82, pp. 405–444.10.1016/j.pmatsci.2016.06.001 ↗
29. D. Nikas, X.D. Zhang, and J. Ahlstrom: Mater. Sci. Eng. A, 2018, vol. 737, pp. 341–347.10.1016/j.msea.2018.09.067 ↗
30. Y. Sakai and H.-J. Schneider-Muntau: Acta Mater., 1997, vol. 45, pp. 1017–1023.10.1016/S1359-6454(96)00248-0 ↗
31. Y.Z. Tian, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao, and T.G. Langdon: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4331–4336.10.1016/j.msea.2011.01.057 ↗
32. C. Biselli and D.C. Morris: Acta Mater., 1996, vol. 44, pp. 493–504.10.1016/1359-6454(95)00212-X ↗
33. Q. Feng, L. Song, Y. Zeng, Y. Fang, L. Meng, J. Liu, and H. Wang: J. Alloys Compd., 2015, vol. 640, pp. 45–50.10.1016/j.jallcom.2015.03.226 ↗
34. J.Y. Brun, S.J. Hamar-Thibault, and C.H. Allibert: Z. Metallk., 1983, vol. 74, pp. 525–529.
35. H. Doi, S. Suzuki, K. Mimura, K. Isshiki, and Y. Waseda: J. Japan Inst. Met., 2004, vol. 68, pp. 78–81.10.2320/jinstmet.68.78 ↗
36. S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473–477.10.1557/JMR.2008.0050 ↗
37. M.A. Turchanin, P.G. Agraval, and A.R. Abdulov: Powder Metall. Met. Ceram., 2008, vol. 47, pp. 344–360.10.1007/s11106-008-9026-2 ↗
38. S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, and T. Takasugi: Mater. Charact., 2013, vol. 82, pp. 23–31.10.1016/j.matchar.2013.04.016 ↗
39. S. Chen, Y.H. Duan, B. Huang, and W.C. Hu: Philos. Mag., 2015, vol. 95, pp. 3535–53.10.1080/14786435.2015.1091110 ↗
40. R. Landauer: J. Appl. Phys., 1952, vol. 23, pp. 779–784.10.1063/1.1702301 ↗
41. J. Miyake and M.E. Fine: Acta Metall., 1992, vol. 40, pp. 733–741.10.1016/0956-7151(92)90015-7 ↗
42. S. Suzuki, K. Hirabayashi, H. Shibata, K. Mimura, M. Isshiki, and Y. Waseda: Scr. Mater., 2003, vol. 48, pp. 431–435.10.1016/S1359-6462(02)00441-4 ↗