A Comparative Study on the Microstructure and Mechanical Properties of Cu6Sn5 and Cu3Sn Joints Formed by TLP Soldering With/Without the Assistance of Ultrasonic Waves
Source abstract
Abstract
In this study, the microstructure and mechanical properties of Cu6Sn5 and Cu3Sn intermetallic joints, formed by the transient liquid phase (TLP) soldering process with and without the assistance of ultrasonic waves (USWs), were compared. After the application of USWs in the TLP soldering process, Cu-Sn intermetallic compounds (IMCs) exhibited a novel noninterfacial growth pattern in the molten solder interlayer. The resulting Cu6Sn5 and Cu3Sn joints consisted of refined equiaxed IMC grains with average sizes of 3 and 2.3 µm, respectively. The Cu6Sn5 grains in the ultrasonically soldered intermetallic joints demonstrated uniform mechanical properties with elastic modulus and hardness values of 123.0 and 5.98 GPa, respectively, while those of Cu3Sn grains were 133.9 and 5.08 GPa, respectively. The shear strengths of ultrasonically soldered Cu6Sn5 and Cu3Sn joints were measured to be 60 and 65 MPa, respectively, higher than that for reflow-soldered intermetallic joints. Ultrasonically soldered Cu6Sn5 and Cu3Sn joints both exhibited a combination of transgranular and intergranular fractures during shear testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. F.P. Carson, Y.C. Kim, and I.S. Yoon: Proc. IEEE, 2009, vol. 97, pp. 31-42.10.1109/JPROC.2008.2007460 ↗
2. H.Y. Hsiao, C.M. Liu, H.W. Lin, T.C. Liu, C.L. Lu, Y.S. Huang, C. Chen, and K. Tu: Science, 2012, vol. 336, pp. 1007-1010.10.1126/science.1216511 ↗
3. Y.J. Chang, C.T. Ko, and K.N. Chen: IEEE Electron. Device Lett., 2013, vol. 34, pp. 102-104.10.1109/LED.2012.2225136 ↗
4. Y. Lv, M. Chen, M. Cai, and S. Liu: Semicond. Sci. Tech., 2014, vol. 29, pp. 25003-25009.10.1088/0268-1242/29/2/025003 ↗
5. W. Zhang and W. Ruythooren: J. Electron. Mater., 2008, vol. 37, pp. 1095-1101.10.1007/s11664-008-0487-3 ↗
6. J.F. Li, P.A. Agyakwa, and C.M. Johnson: Acta Mater., 2010, vol. 58, pp. 3429-3443.10.1016/j.actamat.2010.02.018 ↗
7. N.S. Bosco and F.W. Zok: Acta Mater., 2004, vol. 52, pp. 2965-2972.10.1016/j.actamat.2004.02.043 ↗
8. G.O. Cook and C.D. Sorensen: J. Mater. Sci., 2011, vol. 46, pp. 5305-5323.10.1007/s10853-011-5561-1 ↗
9. B. Liu, Y. Tian, J. Feng, and C. Wang: J. Mater. Sci., 2016, vol. 52, pp. 1-12.10.1007/s11003-016-9919-z ↗
10. B. Liu, Y. Tian, C. Wang, R. An, and C. Wang: Intermetallics, 2017, vol. 80, pp. 26-32.10.1016/j.intermet.2016.10.004 ↗
11. B. Liu, Y. Tian, C. Wang, R. An, and Y. Liu: J. Alloys Compd., 2016, vol. 687, pp. 667-673.10.1016/j.jallcom.2016.06.184 ↗
12. J.F. Li, P.A. Agyakwa, and C.M. Johnson: Acta Mater., 2011, vol. 59, pp. 1198-1211.10.1016/j.actamat.2010.10.053 ↗
13. M. Li, Z. Li, Y. Xiao, and C. Wang: Appl. Phys. Lett., 2013, vol. 102, pp. 094104.10.1063/1.4794684 ↗
14. Z.L. Li, H.J. Dong, X.G. Song, H.Y. Zhao, J.C. Feng, J.H. Liu, H. Tian, and S.J. Wang: Ultrason. Sonochem., 2017, vol. 36, pp. 420-426.10.1016/j.ultsonch.2016.12.026 ↗
15. H. Ji, Y. Qiao, and M. Li: Scr. Mater., 2015, vol. 110, pp. 19-23.10.1016/j.scriptamat.2015.07.036 ↗
16. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A.Venkatesh, and S. Suresh: Acta Mater., 2001, vol. 49, pp. 3899-3918.10.1016/S1359-6454(01)00295-6 ↗
17. R. Zhang, Y. Tian, C. Hang, B. Liu, and C. Wang: Mater. Lett., 2013, vol. 110, pp. 137-140.10.1016/j.matlet.2013.07.116 ↗
18. M. Virot, T. Chave, S.I. Nikitenko, D.G. Shchukin, T. Zemb, and H. Mohwald: J. Phys. Chem. C, 1974, vol. 114, pp. 13083-13091.10.1021/jp1046276 ↗
19. K.S. Suslick, D.A. Hammerton, and R.E. Cline: J. Am. Chem. Soc., 1986, vol. 89, 5641-5642.10.1021/ja00278a055 ↗
20. A. Karimi and J.L. Martin: Int. Mater. Rev., 1985, vol. 31, pp. 219-224.
21. T. Hyeon, K. Kolbeck, W. Mcnamara, and M. Mdleleni: Philos. Trans. R. Soc. B, 1999, vol. 357, pp. 335.10.1098/rsta.1999.0330 ↗
22. Z. Li, M. Li, Y. Xiao, and C. Wang: Ultrason. Sonochem., 2014, vol. 21, pp. 924-929.10.1016/j.ultsonch.2013.09.020 ↗
23. X. Chen, J. Yan, F. Gao, J. Wei, Z. Xu, and G. Fan: Ultrason. Sonochem., 2013, vol. 20, pp. 144-154.10.1016/j.ultsonch.2012.06.011 ↗
24. R.K. Chinnam, C. Fauteux, J. Neuenschwander, and J. Janczak-Rusch: Acta Mater., 2011, vol. 59, pp. 1474-1481.10.1016/j.actamat.2010.11.011 ↗
25. C. Hang, Y. Tian, and R. Zhang: J. Mater. Sci: Mater. Electron., 2013, vol. 24, pp. 3905-3913.
26. S.F. Choudhury and L. Ladani: J. Electron. Mater., 2014, vol. 43, pp. 996-1004.10.1007/s11664-014-2977-9 ↗
27. P.F. Yang, Y.S. Lai, S.R. Jian, J. Chen, and R.S. Chen: Mater. Sci. Eng. A, 2008, vol. 485, pp. 305-310.10.1016/j.msea.2007.07.093 ↗
28. D. Mu, H. Huang, and K. Nogita: Mater. Lett., 2012, vol. 86, pp. 46-49.10.1016/j.matlet.2012.07.018 ↗
29. D. Mu, H. Huang, S.D. Mcdonald, J. Read, and K. Nogita: Mater. Sci. Eng. A, 2013, vol. 566, pp. 126-133.10.1016/j.msea.2012.12.057 ↗
30. X. Deng, N. Chawla, K.K. Chawla, and M. Koopman: Acta Mater., 2004, vol. 52, pp. 4291–303.10.1016/j.actamat.2004.05.046 ↗
31. C. Lee, P. Wang, and J. Kim: 57th Electron. Compo. Technol. Conf. (ECTC 2007), 2007, pp. 648–52.10.1109/ECTC.2007.373866 ↗
32. N. Hansen: Scr. Mater., 2004, vol. 51, pp. 801-806.10.1016/j.scriptamat.2004.06.002 ↗
33. N. Hansen: Mater. Sci. Eng. A, 2005, vol. 409, pp. 39-45.10.1016/j.msea.2005.04.061 ↗
34. K. Chu, Y. Sohn, and C. Moon: Scr. Mater., 2015, vol. 109, pp. 113-117.10.1016/j.scriptamat.2015.07.032 ↗
35. C. Yang, F. Le, and S. W. Ricky Lee: Microelectron. Reliab., 2016, vol. 62, pp. 130-140.10.1016/j.microrel.2016.03.021 ↗