journal article·2012-02

Densification, Microstructure, and Wear Property of In Situ Titanium Nitride-Reinforced Titanium Silicide Matrix Composites Prepared by a Novel Selective Laser Melting Process

Dongdong Gu, Chen Hong, Guangbin Meng

Publisher page

Abstract

This work presents the densification behavior, microstructural features, microhardness, and wear property of in situ TiN/Ti5Si3 composite parts prepared by a novel Selective Laser Melting (SLM) process. The occurrence of balling phenomenon at a low laser energy density combined with a high scan speed and the formation of thermal cracks at an excessive laser energy input generally decreased densification rate. The in situ-formed TiN reinforcing phase experienced a successive morphological change: an irregular polyangular shape—a refined near-round shape—a coarsened dendritic shape, as the applied laser energy density increased. The variations in liquid-solid wettability and intensity of Marangoni convection within laser molten pool accounted for the different growth mechanisms of TiN reinforcement. The TiN/Ti5Si3 composite parts prepared under the optimal SLM conditions had a near-full 97.7 pct theoretical density and a uniform microhardness distribution with a significantly increased average value of 1358.0HV0.3. The dry sliding wear tests revealed that a considerably low friction coefficient of 0.19 without any apparent fluctuation and a reduced wear rate of 6.84 × 10−5mm3/Nm were achieved. The enhanced wear resistance was attributed to the formation of adherent strain-hardened tribolayer covered on the worn surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. R. Mitra: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1629–41.10.1007/s11661-998-0086-1 ↗
2. R. Mitra, V.V. Rama Rao: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1665–75.10.1007/s11661-998-0089-y ↗
3. J.H. Shim, J.S. Byun, and Y.W. Cho: J. Am. Ceram. Soc., 2004, vol. 87, pp. 1853–58.10.1111/j.1151-2916.2004.tb06330.x ↗
4. L.J. Wang, W. Jiang, C. Qin, and L.D. Chen: J. Mater. Sci., 2006, vol. 41, pp. 3831–35.10.1007/s10853-005-5159-6 ↗
5. I.J. Shon, H.C. Kim, D.H. Rho, and Z.A. Munir: Mater. Sci. Eng. A, 1999, vol. 269, pp. 129–35.10.1016/S0921-5093(99)00131-8 ↗
6. J.L. Li, D.L. Jiang, and S.H. Tan: J. Eur. Ceram. Soc., 2002, vol. 22, pp. 551–58.10.1016/S0955-2219(01)00304-1 ↗
7. S.C. Tjong: Adv. Eng. Mater., 2007, vol. 9, pp. 639–52.10.1002/adem.200700106 ↗
8. A. Gåård, P. Krakhmalev, and J. Bergström: J. Alloys Compd., 2006, vol. 421, pp. 166–71.10.1016/j.jallcom.2005.09.084 ↗
9. D.D. Gu, Y.C. Hagedorn, W. Meiners, K. Wissenbach, and R. Poprawe: Surf. Coat Technol., 2011, vol. 205, pp. 3285–92.10.1016/j.surfcoat.2010.11.051 ↗
10. J.F. Shackelford and W. Alexander: CRC Materials Science and Engineering Handbook, 3rd ed., CRC Press, Boca Raton, FL, 2000.10.1201/9781420038408 ↗
11. M.A. Thein, L. Lu, and M.O. Lai: Mater. Sci. Eng. A, 2010, vol. 528, pp. 239–46.10.1016/j.msea.2010.09.015 ↗
12. V. Abbasi Chianeh, H.R. Madaah Hosseini, and M. Nofar: J. Alloys Compd., 2009, vol. 473, pp. 127–32.10.1016/j.jallcom.2008.05.068 ↗
13. C.L. Yeh and G.S. Teng: J. Alloys Compd., 2007, vol. 429, pp. 126–32.10.1016/j.jallcom.2006.04.016 ↗
14. D. Horvitz and I. Gotman: Acta Mater., 2002, vol. 50, pp. 1961–71.10.1016/S1359-6454(02)00041-1 ↗
15. Y.F. Yang, H.Y. Wang, J. Zhang, R.Y. Zhao, Y.H. Liang, and Q.C. Jiang: J. Am. Ceram. Soc., 2008, vol. 91, pp. 2736–39.10.1111/j.1551-2916.2008.02486.x ↗
16. S. Kumar, V. Subramaniya Sarma, and B.S. Murty: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 242–54.10.1007/s11661-009-0063-3 ↗
17. R. Hadian, M. Emamy, and J. Campbell: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 822–32.10.1007/s11663-009-9251-1 ↗
18. B. Zheng, T. Topping, J.E. Smugeresky, Y. Zhou, A. Biswas, D. Baker, and E.J. Lavernia: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 568–73.10.1007/s11661-009-0126-5 ↗
19. B. Zheng, J.E. Smugeresky, Y. Zhou, D. Baker, and E.J. Lavernia: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1196–205.10.1007/s11661-008-9498-1 ↗
20. B.V. Krishna, S. Bose, and A. Bandyopadhyay: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1096–1103.10.1007/s11661-007-9127-4 ↗
21. W.P. Liu and J.N. DuPont: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3397–406.10.1007/s11661-005-0013-7 ↗
22. R. Banerjee, A. Genç, P.C. Collins, and H.L. Fraser: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2143–52.10.1007/s11661-004-0162-0 ↗
23. J.P. Kruth, G. Levy, F. Klocke, and T.H.C. Childs: CIRP Ann. Manuf. Technol., 2007, vol. 56, pp. 730–59.10.1016/j.cirp.2007.10.004 ↗
24. D. Bourell, M. Wohlert, N. Harlan, S. Das, and J. Beaman: Adv. Eng. Mater., 2002, vol. 4, pp. 663–69.10.1002/1527-2648(20020916)4:9<663::AID-ADEM663>3.0.CO;2-1 ↗
25. S. Das: Adv. Eng. Mater., 2003, vol. 5, pp. 701–11.10.1002/adem.200310099 ↗
26. A. Simchi, F. Petzoldt, and H. Pohl: Int. J. Powder Metall., 2001, vol. 37, pp. 49–61.
27. S. Kumar and J.P. Kruth: Mater. Des., 2010, vol. 31, pp. 850–56.10.1016/j.matdes.2009.07.045 ↗
28. D.D. Gu and W. Meiners: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7585–92.10.1016/j.msea.2010.08.075 ↗
29. D.D. Gu and Y.F. Shen: Acta Metall. Sin., 2010, vol. 46, pp. 761–68.10.3724/SP.J.1037.2010.00761 ↗
30. D.D. Gu and Y.F. Shen: J. Alloys Compd., 2009, vol. 473, pp. 107–15.10.1016/j.jallcom.2008.05.065 ↗
31. P. Fischer, V. Romano, H.P. Weber, N.P. Karapatis, E. Boillat, and R. Glardon: Acta Mater., 2003, vol. 51, pp. 1651–62.10.1016/S1359-6454(02)00567-0 ↗
32. A. Simchi and H. Pohl: Mater. Sci. Eng. A, 2003, vol. 359, pp. 119–28.10.1016/S0921-5093(03)00341-1 ↗
33. Q.L. Huang, J. Cai, W. Pan, J. Chen, and J. Lian: Mater. Lett., 1997, vol. 31, pp. 221–25.10.1016/S0167-577X(96)00277-7 ↗
34. I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH, New York, NY, 1993.
35. D.D. Gu, Y.F. Shen, and Z.J. Lu: Mater. Lett., 2009, vol. 63, pp. 1577–79.10.1016/j.matlet.2009.04.010 ↗
36. K. Arafune and A. Hirata: J. Cryst. Growth, 1999, vol. 197, pp. 811–17.10.1016/S0022-0248(98)01071-9 ↗
37. X.B. Zhou and J.Th.M. De Hosson: Acta Mater., 1996, vol. 44, pp. 421–26.10.1016/1359-6454(95)00235-9 ↗
38. Z.F. Yuan, J.J. Ke, and J. Li: Surface Tension of Metals and Alloys, 1st ed., Science Press, Beijing, China, 2006.
39. I. Takamichi and I.L.G. Roderick: The Physical Properties of Liquid Metals, 1st ed., Clarendon Press, Oxford, UK, 1993.
40. H.J. Niu and I.T.H. Chang: Scripta Mater., 1999, vol. 41, pp. 1229–34.10.1016/S1359-6462(99)00276-6 ↗
41. H.H. Zhu, L. Lu, and J.Y.H. Fuh: Mater. Sci. Eng. A, 2004, vol. 371, pp. 170–77.10.1016/j.msea.2003.11.048 ↗
42. P. Mercelis and J.P. Kruth: Rapid Prototyping J., 2006, vol. 12, pp. 254–65.10.1108/13552540610707013 ↗
43. B.S. Kim, S.J. Hong, and D.J. Kim: Metall. Mater. Int., 2010, vol. 16, pp. 565–68.10.1007/s12540-010-0807-z ↗
44. K. Tsukuma, M. Shimada, and M. Koizumi: Ceram. Bull., 1981, vol. 60, pp. 910–12.
45. M.F. Wani, Z.A. Khan, and M. Hadfield: J. Adv. Res. Mech. Eng., 2010, vol. 1, pp. 52–59.
46. A. Jain, B. Basu, B.V. Manoj, K. Harshavardhan, and J. Sarkar: Acta Mater., 2010, vol. 58, pp. 2313–23.10.1016/j.actamat.2009.12.017 ↗