journal article·2015-03

Retained Austenite Stabilization Through Solute Partitioning During Intercritical Annealing in C-, Mn-, Al-, Si-, and Cr-Alloyed Steels

Singon Kang, Emmanuel De Moor, John G. Speer

Publisher page

Abstract

Retained austenite fractions, predicted to be stable at room temperature assuming ortho-equilibrium solute distribution during intercritical annealing, were calculated for “medium-Mn” steels with varying Mn, C, Al, Si, and Cr additions using SSOL 2 and TCFE 7 Thermo-Calc® databases. While Mn additions increase retained austenite levels, increased C levels are not predicted to greatly impact austenite fractions. Additions of Si reduce the levels, whereas opposing trends are predicted for Al additions by the employed Thermo-Calc® databases. Chromium significantly reduces the dependence of retained austenite fraction on annealing temperature. Alloying effects are explained through four critical phase transformation temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. D.K. Matlock, J.G. Speer, E. De Moor, and P.J. Gibbs: JESTECH, 2012, vol. 15, pp. 1–12.
2. S.J. Lee, S. Lee, and B.C. De Cooman: Int. J. Mater. Res., 2013, vol. 104, pp. 423–29.10.3139/146.110882 ↗
3. H. Huang, O. Matsumura, and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10, pp. 621–26.10.1179/mst.1994.10.7.621 ↗
4. S.J. Lee, S. Lee, and B.C. De Cooman: Scripta Mater., 2011, vol. 64, pp. 649–52.10.1016/j.scriptamat.2010.12.012 ↗
5. R.L. Miller: Metall. Trans. A, 1972, vol. 3, pp. 905–12.10.1007/BF02647665 ↗
6. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3691–701.10.1007/s11661-011-0687-y ↗
7. M.J. Merwin: Mater. Sci. Forum, 2007, vol. 539–543, pp. 4327–32.10.4028/www.scientific.net/MSF.539-543.4327 ↗
8. H.F. Xu, J. Zhao, W.Q. Cao, J. Shi, C.Y. Wang, C. Wang, J. Li, and H. Dong: Mater Sci. Eng., 2012, vol. 532, pp. 435–42.10.1016/j.msea.2011.11.009 ↗
9. D.W. Suh, J.H. Ryu, M.S. Joo, H.S. Yang, K.Y. Lee, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 286–93.10.1007/s11661-012-1402-3 ↗
10. S. Lee, K. Lee, and B.C. De Cooman: Mater. Sci. Forum, 2010, vol. 654–656, pp. 286–89.10.4028/www.scientific.net/MSF.654-656.286 ↗
11. E. De Moor, D.K. Matlock, J.G. Speer, and M.J. Merwin: Scripta Mater., 2011, vol. 64, pp. 185–88.10.1016/j.scriptamat.2010.09.040 ↗
12. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5018–24.10.1007/s11661-013-1860-2 ↗
13. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
14. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
15. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗