journal article·2002-07

Constitutive behavior of as-cast AA1050, AA3104, and AA5182

W. M. van Haaften, B. Magnin, W. H. Kool, L. Katgerman

Publisher page

Abstract

Recent thermomechanical modeling to calculate the stress field in industrially direct-chill (DC) cast-aluminum slabs has been successful, but lack of material data limits the accuracy of these calculations. Therefore, the constitutive behavior of three aluminum alloys (AA1050, AA3104, and AA5182) was determined in the as-cast condition using tensile tests at low strain rates and from room temperature to solidus temperature. The parameters of two constitutive equations, the extended Ludwik equation and a combination of the Sellars-Tegart equation with a hardening law, were determined. In order to study the effect of recovery, the constitutive behavior after prestraining at higher temperatures was also investigated. To evaluate the quantified constitutive equations, tensile tests were performed simulating the deformation and cooling history experienced by the material during casting. It is concluded that both constitutive equations perform well, but the combined hardening-Sellars-Tegart (HST) equation has temperature-independent parameters, which makes it easier to implement in a DC casting model. Further, the deformation history of the ingot should be taken into account for accurate stress calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. H.G. Fjaer and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049–61.
2. B. Magnin, L. Katgerman, and B. Hannart: in MCWASP VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 303–10.
3. J.-M. Drezet and M. Rappaz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3214–25.10.1007/BF02663872 ↗
4. G.-U. Grün, A. Buchholz, and D. Mortensen: in Light Metals 2000, R.D. Peterson, ed., TMS, Warrendale, PA, 2000, pp. 573–78.
5. J.-M. Drezet, A. Burghardt, H.G. Fjaer, and B. Magnin: Mater. Sci. Forum, 2000, vols. 329–330, pp. 493–99.10.4028/www.scientific.net/MSF.329-330.493 ↗
6. P. Ludwik: Elemente der Technologischen Mechanik, Springer-Verlag OHG, Berlin, 1909.10.1007/978-3-662-40293-1 ↗
7. A.M. Hammad and K.K. Ramadan: Z. Metallkd., 1989, vol. 80, pp. 431–38.
8. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1209–14.10.4028/www.scientific.net/MSF.217-222.1209 ↗
9. W.M. van Haaften, B. Magnin, W.H. Kool, and L. Katgerman: in Light Metals 1999, C.E. Eckert, ed., TMS, Warrendale, PA, 1999, pp. 829–33.
10. M.L. Nedreberg: Ph.D. Thesis, University of Oslo, Oslo, Norway, 1991.
11. M.A. Wells, I.V. Samarasekera, E.B. Hawbolt, J.K. Brimacombe, and R. Bolingbroke: in Light Metals Processing and Applications, C. Bickert and M. Bouchard, eds., Quebec City, PQ, Canada, 1993, pp. 483–93.
12. I. Farup, J.-M. Drezet, A. Mo, and T. Iveland: J. Thermal Stresses, 2000, vol. 23, pp. 47–58.10.1080/014957300280551 ↗
13. I. Farup and A. Mo: J. Thermal Stresses, 2000, vol. 23, pp. 71–89.10.1080/014957300280579 ↗
14. F. Garofalo: Trans. TMS-AIME, 1963, vol. 227, pp. 351–55.
15. J.J. Jonas, C.M. Sellars, and W.J.McG. Tegart: Met. Rev., 1969, vol. 14, pp. 1–24.10.1179/095066069790138056 ↗
16. R.A. Ayres: Metall. Trans. A, 1979, vol. 10A, pp. 849–54.10.1007/BF02658303 ↗
17. D. Park and J.G. Morris: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 357–64.10.1007/BF02647981 ↗
18. T. Sheppard and A. Jackson: Mater. Sci. Technol., 1997, vol. 13, pp. 203–09.10.1179/mst.1997.13.3.203 ↗
19. H. Oikawa and T.G. Langdon: in Creep Behaviour of Crystalline Solids, B. Wilshire and R.W. Evans, eds., Pineridge Press, Swansea, United Kingdom, 1985, pp. 33–82.
20. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982.
21. L. Ohm and S. Engler: Giessereiforschung, 1990, vol. 42, pp. 131–62.
22. J.A. Spittle, S.G.R. Brown, J.D. James, and R.W. Evans: in Physical Simulation of Casting, Hot Rolling and Welding, National Research Institute for Metals, Tokyo, 1997, pp. 81–91.
23. A. Mo, I. Farup, and J.-M. Drezet: ESAFORM Conf. on Material Forming, J.L. Chenot, J.F. Agassant, P. Montmitonnet, B. Vergnes, and N. Billon, eds., Sophia Antipolis, France, 1998, pp. 1–4.
24. J.M. Rabenberg, I.J. Opstelten, J.C. Storm, and J.-M. Drezet: in Continuous Casting, K. Ehrke and W. Schneider, eds., Wiley-VCH, Weinheim, Germany, 2000, pp. 71–76.10.1002/3527607331.ch10 ↗
25. A. van den Beukel: Phys. Status Solidi A, 1975, vol. 30A, pp. 197–206.10.1002/pssa.2210300120 ↗
26. P.G. McCormick: Acta Metall., 1988, vol. 36, pp. 3061–67.10.1016/0001-6160(88)90043-0 ↗
27. E.M. Taleff, P.J. Nevland, and P.E. Krajewski: in Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 349–58.
28. L.F. Mondolfo: Aluminium Alloys, Structure & Properties, Butterworth & Co, London, 1976.