journal article·2000-02

Liquidus temperature determination in multicomponent alloys by thermal analysis

R. I. Wu, J. H. Perepezko

Publisher page

Abstract

Thermal analysis is often used to determine equilibrium phase boundary temperatures such as the liquids. Accurate measurements require proper calibration procedures, which are standard for given instruments. In multicomponent alloys such as RENE N5 and PWA 1484 superalloys, a complex melting behavior associated with the solidification structure was exposed by examining the melting response at different heating rates. The observed variability in the melting signal is related to the sample processing history and is not addressed by the various standard calibration methods or supplemental procedures for different heating rates. The liquidus temperature can be determined under conditions approaching full compositional equilibrium by the application of an interrupted-heating thermal analysis protocol. The approach provides a new strategy for the reliable determination of phase boundary temperatures by thermal analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. H. Baker: ASM Handbook: Alloy Phase Diagrams, 10th ed., ASM, Metals Park, OH, 1992, vol. 3, pp. 1.16–1.17
2. B. Wunderlich: Thermal Analysis, Academic Press, Inc., San Diego, CA, 1990, pp. 171–80.
3. M.I. Pope, and M.D. Judd: Differential Thermal Analysis, Heyden, London, 1977, pp. 53–59.
4. J.K. Kivilahti and O.B. Tarasova: Metall. Trans. A, 1987, vol. 18A, pp. 1679–81.10.1007/BF02646151 ↗
5. Y. Aoki, S. Hayashi, and H. Komatsu: J. Cryst. Growth, 1992, vol. 123, pp. 313–16.10.1016/0022-0248(92)90038-K ↗
6. D.K. Banerjee, W.J. Boettinger, R.J. Schaefer, and M.E. Williams: in Modeling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, p. 491.
7. S. Dharwadkar, K. Hilpert, F. Schubert, and V. Venugopal: Z. Metallkd., 1992, vol. 83, p. 744.
8. J.S. Zhang, Z.Q. Hu, Y. Murata, M. Morinaga, and N. Yukawa: Metall. Trans. A, 1993, vol. 24A, pp. 2443–50.10.1007/BF02646523 ↗
9. W.D. Cao, R.L. Kennedy, and M.P. Willis: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 147–60.10.7449/1991/Superalloys_1991_147_160 ↗
10. M.J. Cieslak, T.J. Headley, G.A. Knorovsky, A.D. Romig, Jr., and T. Kollie: Metall. Trans. A, 1990, vol. 21A, pp. 479–88.10.1007/BF02782428 ↗
11. C.V. Robino, J.R. Michael, and M.J. Cieslak: Sci. Technol. Welding Joining, 1997, vol. 2, pp. 220–30.10.1179/stw.1997.2.5.220 ↗
12. T.M. Pollock and W.H. Murphy: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1081–94.10.1007/BF02649777 ↗
13. J. Lecomte-Beckers: Metall. Trans. A, 1988, vol. 19A, pp. 2333–40.10.1007/BF02645057 ↗
14. S.N. Tewari, M. Vijayakumar, J.E. Lee, and P.A. Curreri: Mater. Sci. Eng. A, 1991, vol. 141, pp. 97–102.10.1016/0921-5093(91)90713-W ↗
15. V.A. Willis and D.G. McCartney: Mater. Sci. Eng. A, 1991, vol. 145, pp. 223–31.10.1016/0921-5093(91)90252-I ↗
16. M.A. Taha and W. Kurz: Z. Metallkd., 1981, vol. 72, pp. 546–49.
17. ASM Handbook: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM, Metals Park, OH, 1992, vol. 2, pp. 1099 and 1116.
18. R.L. Powell, W.J. Hall, G.W. Burns, M.G. Scroger, and H.H. Plumb: NIST Monographs 125, 1974, pp. 13–17.
19. J. Schramm: Z. Metallkd., 1941, vol. 33, pp. 381–87.
20. W.J. Boettinger and U.R. Kattner: NIST, Gaithersburg, MD, unpublished research, 1999.
21. R.J. Schaefer, M.D. Vaudin, B.A. Mueller, C.S. Choi, and J. Szekely: in Modeling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, p. 593.
22. M. Rappaz, C.-A. Gandin, J.-L. Desbiolles, and P. Thevoz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 695–705.10.1007/BF02648956 ↗