journal article·2000-08

The effect of processing and microstructure development on the slip and fracture behavior of the 2.1 wt pct Li AF/C-489 and 1.8 wt pct Li AF/C-458 Al-Li-Cu-X alloys

A. A. Csontos, E. A. Starke

Publisher page

Abstract

Although Al-Li-Cu alloys showed initial promise as lightweight structural materials, implementation into primary aerospace applications has been hindered due in part to their characteristic anisotropic mechanical and fracture behaviors. The Air Force recently developed two isotropic Al-Li-Cu-X alloys with 2.1 wt pct Li and 1.8 wt pct Li designated AF/C-489 and AF/C-458, respectively. The elongation at peak strength was less than the required 5 pct for the 2.1 wt pct Li variant but greater than 10 pct for the 1.8 wt pct Li alloy. The objectives of our investigations were to first identify the mechanisms for the large difference in ductility between the AF/C-489 and AF/C-458 alloys and then to develop an aging schedule to optimize the microstructure for high ductility and strength levels. Duplex and triple aging practices were designed to minimize grain boundary precipitation while encouraging matrix precipitation of the T1 (Al2CuLi) strengthening phase. Certain duplex aged conditions for the AF/C-489 alloy showed significant increases in ductility by as much as 85 pct with a small decrease of only 6.5 and 2.5 pct in yield and ultimate tensile strength, respectively. However, no significant variations were found through either duplex or triple aging practices for the AF/C-458 alloys, thus, indicating a very large processing window. Grain size and δ′ (Al3Li) volume fraction were determined to be the major cause for the differences in the mechanical properties of the two alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. E.A. Starke, Jr.: Alloying, ASM, Metals Park, OH, 1988, p. 175.
2. A.K. Vasudevan, W.G. Fricke, Jr., M.A. Przystupa, and S. Panchanadeeswaran: ICOTOM 8, TMS, Warrendale, PA, 1988, p. 1071.
3. C.P. Blankenship and E.A. Starke, Jr.: in Aluminum-Lithium Alloys VI, M. Peters and P.J. Winkler, eds., DGM Informationsgesellschaft, Oberursel, Germany, 1992, p. 187.
4. K.T.V. Rao and R.O. Ritchie: Mater. Sci. Technol., 1989, vol. 5, p. 882.10.1179/mst.1989.5.9.882 ↗
5. Materials Directorate, Wright Laboratory, Air Force Material Command, Wright Patterson AFB, OH, under Contract No. F33615-92-C-5914.
6. A.K. Hopkins, K.V. Jata, and R.J. Rioja: in Aluminum Alloys, Their Physical and Mechanical Properties—Proceedings ICAAS, J.H. Driver, B. Dubost, F. Durand, R. Fougeres, P. Guyot, P. Sainfort, and M. Suery, eds., Materials Science Forum, Vols. 217–222, Transtec Publications, Zurich, Switzerland, 1996, p. 421.
7. E.A. Starke, Jr., T.H. Sanders, Jr., and I.G. Palmer: J. Met., 1981, vol. 33, p. 24.
8. D. Webster: Metall. Trans. A, 1987, vol. 18A, pp. 2181–93.10.1007/BF02647091 ↗
9. A.K. Vasudevan, A.C. Miller, and M.M. Kersker: in Aluminum-Lithium Alloys II, E.A. Starke, Jr. and T.H. Sanders, Jr., eds., TMS-AIME, Warrendale, PA, 1983, p. 181.
10. A.K. Vasudevan, R.D. Doherty, and S. Suresh: in Aluminum Alloys—Contemporary Research and Applications, 1989, vol. 31, p. 446.
11. E.A. Starke, Jr. and J.T. Staley: Progr. Aerospace Sci., 1996, vol. 32, p. 131.10.1016/0376-0421(95)00004-6 ↗
12. J.G. Kaufman and J.S. Santner: in Applications of Fracture Mechanics for Selection of Metallic Structural Materials, J.E. Campbell, W.W. Gerberich, and J.H. Underwood eds., ASM, Metals Park, OH, 1982, p. 169.
13. T.H. Sanders, Jr. and E.A. Starke, Jr.: Acta Metall., 1982, vol. 30, p. 927.10.1016/0001-6160(82)90199-7 ↗
14. M. Furukawa, Y. Miura, and M. Nemoto: Trans. Jpn. Inst. Met., 1985, vol. 26, p. 230.10.2320/matertrans1960.26.230 ↗
15. W.A. Cassada, G.J. Shiflet, and E.A. Starke, Jr.: Acta Metall., 1986, vol. 34, p. 367.10.1016/0001-6160(86)90072-6 ↗
16. G. Terlinde and G. Luetjering: Metall. Trans. A, 1982, vol. 13A, pp. 1283–92.10.1007/BF02645512 ↗
17. S. Fox, D.S. McDarmaid, and H.M. Flower: Proc. Aluminum Technology ’86, Institue of Metals, London, 1986, Book 3.
18. A.K. Vasudevan and R.D. Doherty: Acta Metall., 1987, vol. 35, p. 1193.10.1016/0001-6160(87)90001-0 ↗
19. R.E. Crooks, E.A. Kenik, and E.A. Starke, Jr.: Scripta Metall., 1983, vol. 17, p. 643.10.1016/0036-9748(83)90394-0 ↗
20. A.K. Vasudevan and S. Suresh: Mater. Sci. Eng., 1985, vol. 72, p. 37.10.1016/0025-5416(85)90065-5 ↗
21. S. Suresh, A.K. Vasudevan, M. Tosten, and P.R. Howell: Acta Metall., 1987, vol. 35, p. 25.10.1016/0001-6160(87)90210-0 ↗
22. J.M. Duva, M.A. Daeubler, E.A. Starke, Jr., and G. Luetjering: Acta Metall., 1988, vol. 36, p. 585.10.1016/0001-6160(88)90091-0 ↗
23. C.P. Blankenship, Jr., E. Hornbogen, and E.A. Starke, Jr.: Mater. Sci. Eng., 1993, vol. A169, p. 33.10.1016/0921-5093(93)90596-7 ↗
24. M. Sugamata, C.P. Blankenship, Jr., and E.A. Starke, Jr.: Mater. Sci. Eng., 1993, vol A163, p. 110.1016/0921-5093(93)90572-V ↗
25. K.V. Jata and E.A. Starke, Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 1011–26.10.1007/BF02661267 ↗
26. H.J. Roven: Scripta Metall. Mater., 1992, vol. 26, p. 1383.10.1016/0956-716X(92)90653-V ↗
27. E. Hornbogen: Z. Metallkd., 1975, vol. 66, p. 511.
28. T.S. Srivatsan: J. Mater. Sci. Lett., 1988, vol. 7, p. 940.10.1007/BF00720736 ↗
29. E.A. Starke, Jr. and F.S. Lin: Metall. Trans. A, 1982, vol. 13A, pp. 2259–69.10.1007/BF02648396 ↗
30. J.A. Walsh, K.V. Jata, and E.A. Starke, Jr.: Acta Metall., 1989, vol. 37, p. 2861.10.1016/S0001-6160(89)80001-X ↗
31. V.K. Jain, K.V. Jata, R.J. Rioja, J.T. Morgan, and A.K. Hopkins: J. Mater. Processing Technol., 1998, vol. 73, p. 108.10.1016/S0924-0136(97)00219-7 ↗
32. K.V. Jata, S. Panchanadeeswaran, and A.K. Vasudevan: Mater. Sci. Eng., 1998, vol. A257, p. 37.10.1016/S0921-5093(98)00822-3 ↗
33. K.V. Jata and A.K. Vasudevan: Mater. Sci. Eng., 1998, vol. A241, p. 104.10.1016/S0921-5093(97)00479-6 ↗
34. C.P. Blankenship and E.A. Starke, Jr.: Metall. Trans. A, 1993, vol. 24A, p. 833.10.1007/BF02656504 ↗
35. R.F. Ashton, D.S. Thompson, E.A. Starke, Jr., and F.S. Lin: in Aluminum-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.H. Peel, eds., The Institute of Metals, London, 1986, p. 66.
36. T. Ahrens and E.A. Starke, Jr.: in Aluminum-Lithium Alloys V, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., MCE Publications Ltd., Birmingham, United Kingdom, 1989, p. 385.
37. C.P. Blankenship, Jr. and E.A. Starke, Jr.: Scripta Metall., 1992, vol. 26, p. 1719.10.1016/0956-716X(92)90540-U ↗
38. C.P. Blankenship, Jr. and E.A. Starke, Jr.: Acta Metall., 1994, vol. 42, p. 845.10.1016/0956-7151(94)90279-8 ↗
39. W.A. Cassada, G.J. Shiflet, and E.A. Starke, Jr.: Metall. Trans. A, 1991, vol. 22A, pp. 287–97.10.1007/BF02656798 ↗
40. W.A. Cassada, G.J. Shiflet, and E.A. Starke, Jr.: Metall. Trans. A, 1991, vol. 22A, pp. 299–306.10.1007/BF02656799 ↗
41. A.A. Csontos, B.M. Gable, A. Gaber, and E.A. Starke, Jr.: “The Effect of Quench Rate on the Microstructure and Properties of AF/C-458 and AF/C-489 Al-Li-Cu-X Alloys,” 7th International Conference on Aluminium Alloys: Their Physical and Mechanical Properties, Eds. E.A. Starke, Jr., T.H. Sanders, Jr., and W.A. Cassada, Trans Tech Publications, Zurich, Switzerland, pp. 1333–1340, 2000.
42. W.A. Cassada: Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 1987.
43. J.E. Hilliard: TMS-AIME, 1962, vol. 224, p. 906.
44. D.B. Williams and C.B. Carter: Transmission Electron Microscopy, New York, 1996, Plenum Press, New York.10.1007/978-1-4757-2519-3 ↗