Mechanical Properties of DU-xMo Alloys with x = 7 to 12 Weight Percent
Source abstract
Abstract
Mechanical properties of six depleted uranium-molybdenum (U-Mo) alloys have been obtained using microhardness, quasistatic tensile tests, and scanning electron microscopy (SEM) failure analysis. U-Mo alloy foils are currently under investigation for potential conversion of high power research reactors to low enriched uranium fuel. Although mechanical properties take on a secondary effect during irradiation, an understanding of the alloy behavior during fabrication and the effects of irradiation on the integrity of the fuel is essential. In general, the microhardness, yield strength, Young’s modulus, and ultimate tensile strength improved with increasing Mo content. Microhardness measurements were very sensitive to local composition, while the failure mode was significantly controlled by the impurity concentration of the alloy, especially carbon. Values obtained from literature are also provided with reasonable agreement, even though processing conditions and applications were quite different in some instances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. J.L. Snelgrove, G.L. Hofman, M.K. Meyer, C.L. Trybus, and T.C. Wiencek: Nucl. Eng. Des., 1997, vol. 178, pp. 119–26.10.1016/S0029-5493(97)00217-3 ↗
2. A.N. Holden: Dispersion Fuel Elements, Gordon and Breach Science, 1968.
3. M. Ugajin, A. Itoh, M. Akabori, N. Ooka, and Y. Nakakura: J. Nucl. Mater., 1998, vol. 254, pp. 78–83.10.1016/S0022-3115(97)00347-4 ↗
4. M.K. Meyer, G.L. Hofman, T.C. Wiencek, S.L. Hayes, and J.L. Snelgrove: J. Nucl. Mater., 2001, vol. 299, pp. 175–79.10.1016/S0022-3115(01)00676-6 ↗
5. R.F. Hills, B.R. Butcher, and B.W. Howlett: J. Nucl. Mater., 1964, vol. 11 (2), pp. 149–62.10.1016/0022-3115(64)90003-0 ↗
6. J.H. Kittel, B.R.T. Frost, J.P. Mustelier, K.Q. Bagley, G.C. Crittenden, and J. Van Dievoet: J. Nucl. Mater., 1993, vol. 204, pp. 1–13.10.1016/0022-3115(93)90193-3 ↗
7. P.E. Repas, R.H.I. Goodenow, and R.F. Hehemann: AMRA CR63-02/1F, U.S. Army Materials Research Agency, Watertown, MA, 1963.
8. G. Beghi: EURATOM EUR 4053 e, European Atomic Energy Community (EURATOM), 1968.
9. J.A. Larrimore et al.: Seminar on Intense Neutron Source, USAEC-ENEA, Santa Fe, NM, 1966.
10. C.R. Clark, G.C. Knighton, M.K. Meyer, and G.L. Hofman: 2003 Int. Meeting on Reduced Enrichment for Research and Test Reactors, Chicago, IL, 2003, pp. 1–10.
11. LECO IR-412 Carbon Determinator Instruction Manual, Leco Corporation, St. Joseph, MI, 1995.
12. A.M. Nomine, D. Bedere, and D. Miannay: Physical Metallurgy of Uranium Alloys, Proc. 3rd Army Materials Technical Conf., J.J. Burke, D.A. Colling, A.E. Gorum, and J. Greenspan, eds., Vail, CO, 1974, pp. 657–99.
13. R.K. McGeary: United States Atomic Energy Commission Report No. WAPD 127 Part I, Westinghouse Electric Corp.; Bettis Atomic Power Laboratory (WAPD), Pittsburgh, PA, 1951.
14. M.B. Waldron, R.C. Burnett, and S.F. Pugh: AERE-M/B-2554, Atomic Energy Research Establishment (AERE), Harwell, UK, 1958.
15. Nouveau Traite de chimie minerale–Tome XV, quatrieme fascicule, P. Pascal, ed., Paris, 1960, p. 377.
16. W.A. Bostrom and E.K. Halteman: Advanced Nuclear Engineering, Vol. II, J.R. Dunning and B.R. Prentice, eds., Pergamon Press, New York, NY, 1957, pp. 184–93.
17. P.C.L. Pfeil and J.D. Browne: AERE M/R 1333, Atomic Energy Research Establishment (AERE), Harwell, UK, 1954.
18. R.L. Craik, D. Birch, C. Fizzotti, and F. Saraceno: J. Nucl. Mater., 1962, vol. 6 (1), pp. 13–25.10.1016/0022-3115(62)90212-X ↗
19. K.G. Hoge: J. Basic Eng., 1966, pp. 509–17.10.1115/1.3645889 ↗
20. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy Principles and Applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984.
21. C.A.W. Peterson and R.R. Vandervoort: Report No. UCRL-7771, University of California Radiation Laboratory (UCRL), Berkeley, CA, 1964.
22. M.J. Alinger, G.R. Odette, and G.E. Lucas: J. Nucl. Mater., 2002, vols. 307–311, pp. 484–89.10.1016/S0022-3115(02)01220-5 ↗
23. ASM Handbook, 10th ed., vol. 12, Fractography, ASM INTERNATIONAL, Materials Park, OH, 1990.
24. F. Terasaki: Metaux Corros. Ind., 1967, vol. 42, pp. 1–30.