Development of Bimodal Ferrite-Grain Structures in Low-Carbon Steel Using Rapid Intercritical Annealing
Source abstract
Abstract
Mixed ferrite grain structures, which have fine- and coarse-grain regions and showing “bimodal” grain size distributions, have been produced by rapid intercritical annealing of warm-rolled (or cold-rolled) samples. Microstructural changes have been analyzed using dilatometric studies, size prediction of transformed and recrystallized grains, and microtexture measurements. Fine austenite grains (<5 μm) developed during rapid annealing and transformed into fine-ferrite grains (2 to 4 μm) after cooling. Coarse-ferrite grains (28 to 42 μm) resulted from the recrystallization and growth of deformed ferrite. The effect of heating rate on microstructural morphologies during intercritical annealing has also been studied. A slow rate of heating (30 K/s) developed a uniform distribution of fine-ferrite grains and austenitic islands, while rapid heating (300 K/s) generated coarse blocks of austenite, elongated along the prior-pearlitic regions, in the ferrite matrix. As expected, bimodal ferrite grain structures or fine-scale dual-phase structures showed superior combination of tensile strength and ductility, compared to the ultrafine-grained steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1-17.10.1016/j.msea.2006.08.095 ↗
2. J.-E. Jin, Y.-S. Jung, and Y.-K. Lee: Mater. Sci. Eng. A, 2007, vols. 449–451, pp. 786–89.10.1016/j.msea.2006.02.350 ↗
3. M.C. Zhao, F. Yin, T. Hanamura, K. Nagai, and A. Atrens: Scripta Mater.., 2007, vol. 57, pp. 857-60.10.1016/j.scriptamat.2007.06.062 ↗
4. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: Scripta Mater., 2007, vol. 57, pp. 1065-8.10.1016/j.scriptamat.2007.08.035 ↗
5. A. Ohmori, S. Torizuka, and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 1063-71.10.2355/isijinternational.44.1063 ↗
6. R. Song, D. Ponge, and D. Raabe: Scripta Mater., 2005, vol., 52, pp. 1075–80.10.1016/j.scriptamat.2005.02.016 ↗
7. Y.M. Wang, M.W. Chen, F.H. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912-5.10.1038/nature01133 ↗
8. Z. Dapang, L. Yong, L. Feng, W. Yuren, Z. Liujie, and D. Yuhai: Mater. Lett., 2011, vol. 65, pp. 1672-4.10.1016/j.matlet.2011.02.064 ↗
9. S. Patra, S. Md. Hasan, N. Narasaiah, and D. Chakrabarti: Mater. Sci. Eng. A, 2012, vol. 538, pp. 145-55.10.1016/j.msea.2011.12.114 ↗
10. D. Chakrabarti, C. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1963-77.10.1007/s11661-008-9535-0 ↗
11. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Sci. Technol., 2009, vol. 25, pp. 939-46.10.1179/174328408X374694 ↗
12. S. Cai and J.D. Boyd: Mater. Sci. Forum, 2005, vols. 500–501, pp. 171–78.10.4028/www.scientific.net/MSF.500-501.171 ↗
13. A. Bodin, J. Sietsma, and S. van der Zwaag: Mater. Charact., 2001, vol. 47, pp. 187--93.10.1016/S1044-5803(01)00167-X ↗
14. S.C. Hong, S.H. Lim, K.J. Lee, D.H. Shin, and K.S. Lee: ISIJ Int., 2002, vol. 42, pp. 1461-67.10.2355/isijinternational.42.1461 ↗
15. R. Petrov, L. Kestens, K. Verbeken, and Y. Houbaert: Mater. Sci. Forum, 2004, vols. 467–470, pp. 305--10.10.4028/www.scientific.net/MSF.467-470.305 ↗
16. R. Petrov, L. Kestens, and Y. Houbaert: Mater. Sci. Forum, 2007, vols. 539–543, pp. 4363--68.10.4028/www.scientific.net/MSF.539-543.4363 ↗
17. T.S. Wang, F.C. Zhang, M. Zhang, and B. Lv: Mater. Sci. Eng. A, 2008, vol. 485, pp. 456-60.10.1016/j.msea.2007.09.026 ↗
18. M.C. Zhao, T. Hanamura, F. Yin, H. Qiu, and K. Nagai: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1691–1701.10.1007/s11661-008-9531-4 ↗
19. R. Song, D. Ponge, D. Raabe, and R. Kaspar: Acta Mater., 2005, vol. 53, pp. 845-58.10.1016/j.actamat.2004.10.051 ↗
20. L. Storojeva, D. Ponge, R. Kaspar, and D. Raabe: Acta Mater., 2004, vol. 52, pp. 2209-20.10.1016/j.actamat.2004.01.024 ↗
21. C. Lesch, P. A′lvarez, W. Bleck, and J. Gil Sevillano: Metall. Mater. Trans. A, 2007, 38A, pp. 1882--90.10.1007/s11661-006-9052-y ↗
22. P. A’lvarez, C. Lesch, W. Bleck, H. Petitgand, J. Schottler, and J. Gil Sevillano: Mater. Sci. Forum, 2005, vols. 500–501, pp. 771–78.10.4028/www.scientific.net/MSF.500-501.771 ↗
23. D.Z. Yang, E.L. Brown, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1985, vol. 16A, pp. 1385-92.10.1007/BF02658671 ↗
24. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3363-75.10.1007/s11661-004-0173-x ↗
25. N. Piranio, Y.J. Li, F. Roters, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4161-8.10.1016/j.msea.2010.03.028 ↗
26. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1544-57.10.1007/s11661-010-0551-5 ↗
27. R.R. Mohanty, O.A. Girina, and N.M. Fonstein: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3680-90.10.1007/s11661-011-0753-5 ↗
28. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: ISIJ Int., 2011, vol. 51, pp. 958-64.10.2355/isijinternational.51.958 ↗
29. M. Calcagnotto, D. Ponge, and D. Raabe: ISIJ Int., 2008, vol. 48, pp. 1096-101.10.2355/isijinternational.48.1096 ↗
30. M. Calcagnotto, D. Ponge, and D. Raabe: Metall. Mater. Trans. A, 2012, vol. 43, pp. 37-46.10.1007/s11661-011-0828-3 ↗
31. G. Azevedo, R. Barbosa, E.V. Pereloma, and D.B. Santos: Mater. Sci. Eng. A, 2005, vol. 402, pp. 98-108.10.1016/j.msea.2005.04.026 ↗
32. I.B. Timokhina, A.I. Nosenkov, A.O. Humphreys, J.J. Jonas, and E.V. Pereloma: ISIJ Int., 2004, vol. 44, pp. 717-24.10.2355/isijinternational.44.717 ↗
33. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
34. G.F. Vander Voort and J.J. Friel: Mater. Charact., 1992, vol. 29, pp. 293--312.10.1016/1044-5803(92)90101-M ↗
35. A. Karani: M. Tech: Master’s Thesis, Indian Institute of Technology Kharagpur, India, 2011.
36. T. Lolla, G. Cola, B. Narayanan, B. Alexandrov, and S.S. Babu: Mater. Sci. Technol., 2011, vol. 27, pp. 863-75.10.1179/174328409X433813 ↗
37. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419-28.10.1007/BF02643686 ↗
38. C.I. Garcia and A.J. DeArdo: Metall. Trans. A, 1981, vol. 12A, pp. 521-30.10.1007/BF02648551 ↗
39. C.M. Sellars and J. Beynon: Proc. Conf. on High Strength Low Alloy Steels, D. Dunne and T. Chandra, eds., South Coast Printers, Port Kembla, Australia, 1985, pp. 142–50.
40. M.R. Barnett and J.J. Jonas: ISIJ Int., 1999, vol. 39, pp. 856-73.10.2355/isijinternational.39.856 ↗
41. D. Quidort and Y.J.M. Brechet: ISIJ Int., 2002, vol. 42, pp. 1010-7.10.2355/isijinternational.42.1010 ↗
42. R.E. Reed-Hill: Physical Metallurgy Principles, 2nd ed., Van Nostrand Company, New York, NY, 1973.
43. P. Maynier, J. Dollet, and P. Bastien: Hardenability Concepts with Applications to Steel, The Metallurgical Society of AIME, 1978, pp. 163–78.
44. M. Sanchez-Araiza, S. Godet, and J.J. Jonas: Mater. Sci. Forum, 2005, vols. 495–497, pp. 501–06.10.4028/www.scientific.net/MSF.495-497.501 ↗
45. I.L. Dillamore, C.J.E. Smith, and T.W. Watson: J. Mater. Sci., 1967, vol. 1, pp. 49-54.
46. R.A. Grange: Metall. Trans. A, 1971, vol. 2, pp. 65-78.10.1007/BF02662639 ↗
47. A.I. Katsamas: Surf. Coat. Tech., 2007, 201, pp. 6414--22.10.1016/j.surfcoat.2006.12.014 ↗