journal article·2015-09Open access

Modeling of Intermetallic Compounds Growth Between Dissimilar Metals

Li Wang, Yin Wang, Philip Prangnell, Joseph Robson

Abstract

Abstract A model has been developed to predict growth kinetics of the intermetallic phases (IMCs) formed in a reactive diffusion couple between two metals for the case where multiple IMC phases are observed. The model explicitly accounts for the effect of grain boundary diffusion through the IMC layer, and can thus be used to explore the effect of IMC grain size on the thickening of the reaction layer. The model has been applied to the industrially important case of aluminum to magnesium alloy diffusion couples in which several different IMC phases are possible. It is demonstrated that there is a transition from grain boundary-dominated diffusion to lattice-dominated diffusion at a critical grain size, which is different for each IMC phase. The varying contribution of grain boundary diffusion to the overall thickening kinetics with changing grain size helps explain the large scatter in thickening kinetics reported for diffusion couples produced under different conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. M. Kajihara: Acta Mater., 2004, vol. 52, pp. 1193-1200.10.1016/j.actamat.2003.10.047 ↗
2. M. Kajihara: Mater. Sci. Eng. A, 2005, vol. 403, pp. 234-240.10.1016/j.msea.2005.05.013 ↗
3. H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla, G. Eggeler: Acta Mater., 2011, vol. 59, pp. 1586-1600.10.1016/j.actamat.2010.11.023 ↗
4. J.D. Robson: Acta Mater., 2013, vol. 61, pp. 7781-7790.10.1016/j.actamat.2013.09.017 ↗
5. A. Panteli, J.D. Robson, I. Brough, P.B. Prangnell, Mater. Sci. Eng. A, 2012, vol. 556, pp. 31-42.10.1016/j.msea.2012.06.055 ↗
6. D.H. Choi, B.W. Ahn, C.Y. Lee, Y.M. Yeon, K. Song, S.B. Jung: Intermetallics, 2011, vol. 19, pp. 125-130.10.1016/j.intermet.2010.08.030 ↗
7. L. Liu, H. Wang, G. Song, J. Ye: J. Mater. Sci., 2007, vol. 42, pp. 565-572.10.1007/s10853-006-1068-6 ↗
8. A. Panteli, J.D. Robson, Y.C. Chen, P.B. Prangnell: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 5773-5781.10.1007/s11661-013-1928-z ↗
9. J. Robson, A. Panteli, P.B. Prangnell: Sci. Technol. Weld. Join., 2012, vol.17, pp.447-453.10.1179/1362171812Y.0000000032 ↗
10. E.M. Tanguep Njiokep, M. Salamon, H. Mehrer (2001) Defect Diffus. Forum., 2001, vols. 194–199, pp. 1581-1586.10.4028/www.scientific.net/DDF.194-199.1581 ↗
11. C.V. Kidson: J. Nucl. Mater., 1961, vol.3, pp. 21-29.10.1016/0022-3115(61)90175-1 ↗
12. P. Heitjans, J. Kärger: Diffusion in condensed matter: methods, materials, models, Springer, Heidelberg, 2005, pp. 337-366.10.1007/3-540-30970-5 ↗
13. C. Matano: Jpn. J. Phys., 1933, vol. 8, pp. 109-113.
14. S. Brennan, K. Bermudez, N.S. Kulkarni, Y. Shon: Metall. Mater. Trans. A, 2012, vol.43A, pp.4043-4052.10.1007/s11661-012-1248-8 ↗
15. S.K. Das, Y.M. Kim, T.K. Ha, R. Gauvin, I.H. Jung: Metall. Mater. Trans. A, 2013, vol.44A, pp.2539-2547.10.1007/s11661-013-1636-8 ↗
16. R.S. Barnes: Nature, 1950, vol.166, pp.1032-1033.10.1038/1661032a0 ↗
17. L.G. Harrison: Trans. Faraday Soc., 1961, vol.57, pp. 1191-1199.10.1039/tf9615701191 ↗
18. D. Dietrich, D. Nickel, M. Krause, T. Lampke, M.P. Coleman, V. Randle: J. Mater. Sci., 2011, vol. 46, pp. 357-364.10.1007/s10853-010-4841-5 ↗
19. J. Yan, Z. Xu, Z. Li, L. Li, S. Yang: Scripta Mater., 2005, vol. 53, pp. 585-589.10.1016/j.scriptamat.2005.04.022 ↗
20. Z.F. Li, J. Dong, X.Q. Zeng, C. Lu, W.J. Ding, Z.M. Ren: J. Alloys Compd., 2007, vol. 440, pp. 132-136.10.1016/j.jallcom.2006.09.032 ↗
21. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 1996, pp. 333-378.
22. H.L. Su, M. Harmelin, P. Donnadieu, C. Baetzner, H.J. Seifert, H.L. Lukas, G. Effenberg, F. Aldinger: J. Alloys Compd., 1997, vol. 247, pp. 57-65.10.1016/S0925-8388(96)02595-9 ↗
23. T. Czeppe, W. Zakulski, E. Bielanska: J. Phase equilibria, 2003, vol. 24, pp. 249-254.10.1361/105497103770330550 ↗
24. N.C. Goel, J.R. Cahoon, B. Mikkelsen: Metall. Trans. A, 1989, vol.20, pp.197-203.10.1007/BF02670245 ↗
25. Panteli A.: Friction Joining of Aluminium-to-Magnesium for Lightweight Automotive Applications: PhD thesis, The University of Manchester, Manchester, UK, 2012, pp. 216–239.