Effect of Ta Addition on the Microstructure and Tensile Properties of a Ni-Co Base Superalloy
Source abstract
Abstract
Herein, the effect of Ta addition (0 and 2 wt pct) on the tensile properties of a Ni-Co base superalloy was investigated in the temperature range of 23–900 °C. The results revealed that the addition of Ta improved the strength of the superalloy at all experimental temperatures and increased the plasticity at 760 °C. In addition, the microstructural observations indicate that Ta addition promoted the precipitation of γ′ precipitates, as well as the precipitation of (Ta, Ti)-rich MC carbides. The addition of 2 wt pct Ta promoted twinning and, thus, transformed the fracture mechanism of the alloy from an intergranular brittle fracture to a mixed ductile and brittle fracture at 760 °C. Furthermore, the tensile properties and the related microstructures, deformation mechanisms, and fracture mechanisms of the experimental alloys are discussed. Finally, we demonstrated that the combined effect of the increase in the grain boundary strength, the reduction in the critical resolved shear stress, and the promotion of twinning induced the synchronous improvement of strength and plasticity of the alloy at 760 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Reed RC (2006) The Superalloys: Fundamentals and Applications, 1st edn. Cambridge University Press, New York. https://doi.org/10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗
2. Kearsey RM, Koul AK, Beddoes JC, Cooper C (2012) Superalloys 2000. TMS, Warrendale, PA, pp 117-126
3. Y.F. Gu, H. Harada, C.Y. Cui, D.H. Ping, A. Sato, J. Fujioka: Scripta Mater., 2006, vol. 55, pp. 815-818.10.1016/j.scriptamat.2006.07.008 ↗
4. J.T. Guo: Acta Metall. Sin., 1978, vol. 14, pp. 227-238.
5. C.Y. Cui, A. Sato, Y.F. Gu, D.H. Ping, H. Harada: Metall. Mater. Trans. A, 2006, vol. 37, pp. 3183-3190.10.1007/BF02586152 ↗
6. C. Booth-Morrison, Z.G. Mao, R.D. Noebe, D.N. Seidman: Appl. Phys. Lett., 2008, vol. 93, pp. 033103-033103-3.10.1063/1.2956398 ↗
7. C. Booth-Morrison, R.D. Noebe, D.N. Seidman: Acta Mater., 2009, vol. 57, pp. 909-920.10.1016/j.actamat.2008.10.029 ↗
8. M. Yamashita, K. Kakehi: Scripta Mater., 2006, vol. 55, pp. 139-142.10.1016/j.scriptamat.2006.03.048 ↗
9. S.K. Makineni, M. Lenz, S. Neumeier, E. Spiecker, D. Raabe, B. Gault: Scripta Mater., 2018, vol. 157, pp. 62-66.10.1016/j.scriptamat.2018.07.042 ↗
10. S. Gao, J.S. Hou, F. Yang, Y.A. Guo, C.S. Wang, L.Z. Zhou: Mater. Sci. Eng. A, 2017, vol. 706, pp. 153-160.10.1016/j.msea.2017.09.014 ↗
11. P.Y. Xing, Y.W. Zhang, J. Jia: Powder Metall. Industry, 2019, vol. 29, pp. 33-38.
12. Greving D, Kantzos P, Neumann J, Rice D, Kington H (2012) Superalloys 2012. TMS, Warrendale, PA, pp 843-85210.1002/9781118516430.ch93 ↗
13. Y. Gao, R.O. Ritchie, M. Kumar, R.K. Nalla: Metall. Mater. Trans. A, 2005, vol. 36, pp. 3325-3333.10.1007/s11661-005-0007-5 ↗
14. Y. Gao, J.S. Stolken, M. Kumar, R.O. Ritchie: Acta Mater., 2007, vol. 55, pp. 3155-3167.10.1016/j.actamat.2007.01.033 ↗
15. C. Stocker, M. Zimmermann, H.J. Christ, Z.L. Zhan, C. Cornet, L.G. Zhao, M.C. Hardy, J. Tong: Mater. Sci. Eng. A, 2009, vol. 518, pp. 27-34.10.1016/j.msea.2009.04.055 ↗
16. J. Zhang: Scripta Mater., 2003, vol.48, pp. 677-681.10.1016/S1359-6462(02)00559-6 ↗
17. Z.Y. Meng, G.C. Sun, M.L. Li, and X.S. Xie: Superalloys, 1984, pp. 563–72. https://doi.org/10.7449/1984/Superalloys_1984_563_572.10.7449/1984/Superalloys_1984_563_572 ↗
18. Y. Yuan, Y. F. Gu, T. Osada, Z. H. Zhong, T. Yokokawa, H. Harada: Scripta Mater., 2012, vol. 67, pp. 137-140.10.1016/j.scriptamat.2012.03.042 ↗
19. L. Kovarik, R. R. Unocic, J. Li, P. Sarosi, C. Shen, Y. Wang, M.J. Mills: Prog. Mater. Sci., 2009, vol. 54, pp. 839-873.10.1016/j.pmatsci.2009.03.010 ↗
20. E.I. Galindo-Nava, L.D. Connor, C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377-390.10.1016/j.actamat.2015.07.048 ↗
21. Yan JB, Gu YF, Li H, Yang F, Yuan Y, Zhang P, Zhao XB, Dang YY, Zhen Y (2018) Metall Mater Trans A 49:1561-157010.1007/s11661-018-4514-6 ↗
22. M. Heilmaier, U. Leetz, B. Reppich: Mater. Sci. Eng. A, 2001, vol. 319-321, pp. 375-378.10.1016/S0921-5093(01)00989-3 ↗
23. N. Saunders, S. Kucherenko, X. Li, A.P. Miodownik, J.P. Schille: J. Phase Equilib., 2001, vol. 22, pp. 463-469.10.1361/105497101770333036 ↗
24. Y. Yuan, Y.F. Gu, C.Y. Cui, T. Osada, Z.H. Zhong, T. Tetsui: J. Mater. Res., 2011, vol. 26, pp. 2833-2837.10.1557/jmr.2011.346 ↗
25. Zhang P, Yuan Y, Shen SC, Li B, Zhu RH, Yang GX, Song XL (2017) J Alloy Compd 694:502-50910.1016/j.jallcom.2016.09.303 ↗
26. P. Zhang, Y. Yuan, B Li, S. W. Guo, G. X. Yang, X. L. Song: Mater. Sci. Eng. A, 2016, vol. 655, pp. 152-159.10.1016/j.msea.2015.12.089 ↗
27. J. Xie, S.G. Tian, J.J. Li, X.M. Zhou, Y. Su: Mater. Sci. Tech., 2013, vol. 29, pp. 1021-1026.10.1179/1743284713Y.0000000231 ↗
28. M. A. Meyers, K. K. Chawla: Mechanical Behavior of Materials, 2nd ed., Cambridge University Press, New York, 2008, pp. 161-245.10.1017/CBO9780511810947.006 ↗
29. C.Z. Zhu, Y. Yuan, J.M. Bai, P. Zhang, J.B. Yan, C.Y. You, Y.F. Gu: Mater. Sci. Eng. A, 2018, vol.740-741, pp. 71-81.
30. J. H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268-290.
31. C.L. Yang, Z.J. Zhang, P. Zhang, C.Y. Cui, Z.F. Zhang: Mater. Sci. Eng. A, 2018, vol. 736, pp. 100-104.10.1016/j.msea.2018.08.012 ↗
32. P. J. Jackson: Prog. Mater. Sci., 1985, vol. 29. pp. 139-175.10.1016/0079-6425(85)90009-X ↗
33. M. S. Duesbery, N. P. Louat, K. Sadananda: Acta Metall. Et Mater., 1992, vol. 40, pp. 149-158.10.1016/0956-7151(92)90208-V ↗
34. Y. Qi, A. Strachan, T. Cagin, W. A. G. Iii: Mater. Sci. Eng. A, 2001, vol. 309, pp. 156-159.10.1016/S0921-5093(00)01716-0 ↗
35. G. Chalant, L. Remy: Acta Metall., 1980, vol. 28, pp. 75-88.10.1016/0001-6160(80)90042-5 ↗
36. Rong LJ, Li YY, Cheng HM, Shi CX (1996) In: Summers LT (eds): Advances in Cryogenic Engineering Materials, vol 42. Springer, Boston, pp 299-30610.1007/978-1-4757-9059-7_40 ↗
37. T. Kruml, E. Conforto, B.L. Piccolo, D. Caillard, J.L. Martin: Acta Mater., 2002, vol. 20, pp. 5091-5101.10.1016/S1359-6454(02)00364-6 ↗
38. C.G. Tian, G.M. Han, C.Y. Cui, X.F. Sun: Mater. Design, 2015, vol. 88, pp. 123-131.10.1016/j.matdes.2015.08.114 ↗
39. L. Q. Cui, H.H. Su, J.J. Yu, J.L. Liu, T. Jin, X.F. Sun: Mater. Sci. Eng. A, 2017, vol. 696, pp. 323-330.10.1016/j.msea.2017.04.065 ↗
40. B. Bay, N. Hansen, D. A. Hughes, D. Kuhlmann-Wilsdorf: Acta Metall. Et Mater., 1992, vol. 40, pp. 205-219.10.1016/0956-7151(92)90296-Q ↗
41. Q.Z. Chen, D.M. Knowles: Mater. Sci. Eng. A, 2003, vol. 352, pp. 352-367.10.1016/S0921-5093(03)00148-5 ↗
42. O. Bouaziz, N. Guelton: Mater. Sci. Eng. A, 2001, vol. 319-321, pp. 246-249.10.1016/S0921-5093(00)02019-0 ↗
43. P. Yang, Q. Xie, L. Meng, H. Ding, Z. Tang: Scripta Mater., 2016, vol. 55, pp. 629-631.10.1016/j.scriptamat.2006.06.004 ↗
44. A. Serra, D.J. Bacon, R.C. Pond: Metall. Mater. Trans. A,2002, vol. 33, pp. 809–812.10.1007/s11661-002-0149-7 ↗
45. I. Gutierrez-Urrutia, D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791-5802.10.1016/j.actamat.2012.07.018 ↗