journal article·2016-04Open access

Microstructure Evolution of a Medium Manganese Steel During Thermomechanical Processing

Binhan Sun, Huseyin Aydin, Fateh Fazeli, Stephen Yue

Abstract

An as-cast Fe-0.2C-10Mn-3Si-3Al medium manganese steel with a ferrite plus austenite duplex microstructure was subjected to hot compression tests at deformation temperatures within two-phase (α + γ) range and various strain rates. The microstructure evolution of the experimental steel during hot deformation was investigated. The flow curves were characterized by a discontinuous yielding at the beginning of plastic deformation, followed by a weak work hardening to a peak and a subsequent mild softening stage. Two restoration processes took place during hot deformation, namely dynamic recrystallization (DRX) of austenite and continuous dynamic recrystallization of ferrite. The DRX of austenite was believed to dominate the softening stage of the flow curves. The discontinuous yielding stemmed from the existing Kurdjumov–Sachs (K–S) orientation relationship between ferrite and austenite in the initial undeformed microstructure, which gradually weakened during subsequent deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. D.K. Matlock and J.G. Speer: in Microstructure and Texture in Steels, A. Haldar, S. Suwas, and D. Bhattacharjee, eds., Springer, New York, 2009, pp. 185–205.10.1007/978-1-84882-454-6_11 ↗
2. Y.K. Lee and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843–56.10.1179/1743284714Y.0000000722 ↗
3. B.C. De Cooman, P. Gibbs, S. Lee and D.K. Matlock: Metall. Mater. Trans. A, 2013, vol 44. pp. 2563–72.10.1007/s11661-013-1638-6 ↗
4. A. Dumay, J.P. Chateau, S. Allain, S. Migot and O. Bouaziz: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
5. E. Pereloma and D.V. Edmonds: Phase Transformations in Steels. 1st ed., vol 2, Woodhead Publishing Ltd., Philadelphia, PA, 2012, pp. 213–246.10.1533/9780857096104 ↗
6. H. Aydin, E. Essadiqi, I.H. Jung and S. Yue: Mater. Sci. Eng. A, 2013, vol. 564. pp. 501–08.10.1016/j.msea.2012.11.113 ↗
7. D.W. Suh, S.J. Park, T.H. Lee, C.S. Oh and S.J. Kim: Metall. Mater. Trans. A, 2010, vol. 41, pp. 397-408.10.1007/s11661-009-0124-7 ↗
8. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd., 2004, pp. 415–50.10.1016/B978-008044164-1/50017-7 ↗
9. G. Glover and C. Sellars: Metall. Trans., 1973, vol. 4, pp. 765–75.10.1007/BF02643086 ↗
10. S.V.S.N. Murty, S. Torizuka, K. Nagai, T. Kitai and Y. Kogo: Scripta Mater., 2005, vol. 53, pp. 763–68.10.1016/j.scriptamat.2005.05.027 ↗
11. M.R. Barnett, G.L. Kelly and P.D. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1893–1900.10.1007/s11661-002-0022-8 ↗
12. J. Baczynski and J.J. Jonas: Metall. Mater. Trans. A, 1998, vol. 29, pp. 447–62.10.1007/s11661-998-0125-y ↗
13. G.E. Dieter, H.A. Kuhn, and S.L. Semiatin: Handbook of Workability and Process Design. 1st ed. ASM international, 2003, pp. 35–116.
14. L. Duprez, B.C. De Cooman and N. Akdut: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1931–38.10.1007/s11661-002-0026-4 ↗
15. P. Cizek and B.P. Wynne: Mater. Sci. Eng. A, 1997, vol. 230, pp. 88–94.10.1016/S0921-5093(97)00087-7 ↗
16. O. Balancin, W.A.M. Hoffmann and J.J. Jonas: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1353–64.10.1007/s11661-000-0254-4 ↗
17. G. Fan, J. Liu, P. Han and G. Qiao: Mater. Sci. Eng. A, 2009, vol. 515, pp. 108-12.10.1016/j.msea.2009.02.022 ↗
18. A. Iza-Mendia, A. Pinol-Juez, J.J. Urcola and I. Gutiérrez: Metall. Mater. Trans. A, 1998, vol. 29, pp. 2975–86.10.1007/s11661-998-0205-z ↗
19. H. Farnoush, A. Momeni, K. Dehghani, J.A. Mohandesi and H. Keshmiri: Mater. Des., 2010, vol. 31, pp. 220–26.10.1016/j.matdes.2009.06.028 ↗
20. C.M. Sellars and W.J.McG. Tegart: Mem. Sci. Rev. Met., 1966, vol. 63, pp. 731–46.
21. J.M. Cabrera, A. Mateo, L. Llanes, J.M. Prado and M. Anglada: J. Mater. Process. Technol., 2003, vols. 143–144, pp. 321–25.10.1016/S0924-0136(03)00434-5 ↗
22. A.S. Hamada, L.P. Karjalainen and M.C. Somani: Mater. Sci. Eng. A, 2007, vol. 467, pp. 114–24.10.1016/j.msea.2007.02.074 ↗
23. C.G. Schmidt, C.M. Young, B. Walser, R.H. Klundt and O.D. Sherby: Metall. Trans. A, 1982, vol. 13, pp. 447–56.10.1007/BF02643353 ↗
24. H. Mirzadeh, A. Najafizadeh and M. Moazeny: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2950–58.10.1007/s11661-009-0029-5 ↗
25. W. Roberts and B. Ahlblom: Acta Mater., 1978, vol. 26, pp. 801–13.10.1016/0001-6160(78)90030-5 ↗
26. A.M. Jorge Júnior, G.S. Reis and O. Balancin: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2259–64.10.1016/j.msea.2010.11.087 ↗
27. S. Spigarelli, M. El Mehtedi, P. Ricci and C. Mapelli: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4218–28.10.1016/j.msea.2010.03.029 ↗
28. G. Martin, S.K. Yerra, Y. Bréchet, M. Véron, J.D. Mithieux, B. Chéhab, L. Delannay and T. Pardoen: Acta Mater., 2012, vol. 60, pp. 4646–60.10.1016/j.actamat.2012.03.040 ↗