Influence of Strain Rate on Compressive Deformation Behavior of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature
Source abstract
Abstract
The compressive-deformation behavior of the Zr50.7Cu28Ni9Al12.3 bulk metallic glass (BMG) was investigated over a wide strain-rate range at room temperature. The yield strength of the BMG studied is independent of the strain rates applied upon quasi-static loading; however, it decreases remarkably upon dynamic loading. Serrated flows and shear bands appear at low quasi-static strain rates; nevertheless, they vanish as the strain rate increases to 1.0 × 10−1 s−1. Cracks appearing on the side surface of the fractured sample after dynamic compression yield a strain-accommodation deformation mechanism upon dynamic loading. Scanning electron microscopy observations reveal that molten liquids increase on the fractured surfaces with increasing strain rate, indicating that adiabatic heating in the shear bands is enhanced as the strain rate increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Cultural Heritage Materials Analysis · Mineralogy and Gemology Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A. Inoue, W. Zhang, T. Zhang, and K. Kurosaka: Acta Mater., 2001, vol. 49, pp. 2645–52.10.1016/S1359-6454(01)00181-1 ↗
2. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
3. W.H. Wang, C. Dong, and C.H. Shek: Mater. Sci. Eng. R, 2004, vol. 44, pp. 45–89.10.1016/j.mser.2004.03.001 ↗
4. M.F. Ashby and A.L. Greer: Scripta Mater., 2006, vol. 54, pp. 321–26.10.1016/j.scriptamat.2005.09.051 ↗
5. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
6. A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, and L. Schultz: Nanostruct. Mater., 1998, vol. 10, pp. 805–17.10.1016/S0965-9773(98)00117-2 ↗
7. E.S. Park and D.H. Kim: Met. Mater. Int., 2004, vol. 11 pp. 19–27.10.1007/BF03027480 ↗
8. H.A. Bruck, A.J. Rosakis, and W.L. Johnson: J. Mater. Res., 1996, vol. 11, pp. 503–11.10.1557/JMR.1996.0060 ↗
9. G. Subhash, R.J. Dowding, and L.J. Kecskes: Mater. Sci. Eng. A, 2002, vol. 334, pp. 33–40.10.1016/S0921-5093(01)01768-3 ↗
10. J.F. Sun, M. Yan, and J. Shen: Trans. Nonferrous Met. Soc. China, 2005, vol. 15, pp. 115–19.
11. H. Li, G. Subhash, X.L. Gao, and L.J. Kecskes: Scripta Mater., 2003, vol. 49, pp. 1087–92.10.1016/j.scriptamat.2003.08.012 ↗
12. T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi: Intermetallics, 2002, vol. 10. pp. 1071–77.10.1016/S0966-9795(02)00137-1 ↗
13. T.C. Hufnagel, T. Jiao, Y. Li, L.Q. Xing, and K.T. Ramesh: J. Mater. Res., 2002, vol. 17, pp. 1441–45.10.1557/JMR.2002.0214 ↗
14. Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, and H.F. Zhang: Mater. Sci. Eng. A, 2008, vol. 473, pp. 105–10.10.1016/j.msea.2007.04.044 ↗
15. W.F. Ma, H.C. Kou, J.S. Li, H. Chang, and L. Zhou: J. Alloys Compd., 2009, vol. 472, pp. 214–18.10.1016/j.jallcom.2008.04.043 ↗
16. J. Zhang, J.M. Park, D.H. Kim, and H.S. Kim: Mater. Sci. Eng. A, 2007, vols. 449–451, pp. 290–94.10.1016/j.msea.2006.02.405 ↗
17. L.F. Liu, L.H. Dai, Y.L. Bai, B.C. Wei, and G.S. Yu: Intermetallics, 2005, vol. 13, pp. 827–32.10.1016/j.intermet.2005.01.012 ↗
18. Y.J. Sun, D.D. Qu, Y.J. Huang, K.-D. Liss, X.S. Wei, D.W. Xing, and J. Shen: Acta Mater., 2009, vol. 57, pp. 1290–99.10.1016/j.actamat.2008.11.007 ↗
19. Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, and H.F. Zhang: Mater. Sci. Eng. A, 2007, vols. 445–446, pp. 275–80.10.1016/j.msea.2006.09.025 ↗
20. S.X. Song and T.G. Nieh: Intermetallics, 2009, vol. 17, pp. 762–67.10.1016/j.intermet.2009.03.005 ↗
21. Z.F. Zhang, J. Eckert, and L. Schultz: Acta Mater., 2003, vol. 51, pp. 1167–79.10.1016/S1359-6454(02)00521-9 ↗
22. W.H. Jiang, G.J. Fan, F.X. Liu, G.Y. Wang, and P.K. Liaw: J. Mater. Res., 2006, vol. 21, pp. 2164–67.10.1557/jmr.2006.0266 ↗
23. Z.F. Zhang, H. Zhang, X.F. Pan, J. Das, and J. Eckert: Philos. Mag. Lett., 2005, vol. 85, pp. 513–21.10.1080/09500830500395237 ↗
24. H. Bei, S. Xie, and E.P. George: Phys. Rev. Lett., 2006, vol. 96, p. 105503.10.1103/PhysRevLett.96.105503 ↗
25. S.X. Song, H. Bei, J. Wadsworth, and T.G. Nieh: Intermetallics, 2008, vol. 16, pp. 813–18.10.1016/j.intermet.2008.03.007 ↗
26. W.H. Jiang, G.J. Fan, H. Choo, and P.K. Liaw: Mater. Lett., 2006, vol. 60, pp. 3537–40.10.1016/j.matlet.2006.03.047 ↗
27. Z. Han, W.F. Wu, Y. Li, Y.J. Wei, and H.J. Gao: Acta Mater., 2009, vol. 57, pp. 1367–72.10.1016/j.actamat.2008.11.018 ↗
28. Y. Zhang and A.L. Greer: Appl. Phys. Lett., 2006, vol. 89, p. 071907.10.1063/1.2336598 ↗
29. C.A. Pampillo: J. Mater. Sci., 1975, vol. 10, pp. 1194–1227.10.1007/BF00541403 ↗
30. J.T. Fan, F.F. Wu, Z.F. Zhang, F. Jiang, J. Sun, and S.X. Mao: J. Non-Cryst. Solids, 2007, vol. 353, pp. 4707–17.10.1016/j.jnoncrysol.2007.06.062 ↗
31. P.S. Steif, F. Spaepen, and J.W. Hutchinson: Acta Metall., 1982, vol. 30, pp. 447–55.10.1016/0001-6160(82)90225-5 ↗
32. F.F. Wu, Z.F. Zhang, F. Jiang, J. Sun, J. Shen, and S.X. Mao: Appl. Phys. Lett., 2007, vol. 90, p. 191909.10.1063/1.2738366 ↗
33. F.F. Wu, Z.F. Zhang, B.L. Shen, S.X. Mao, and J. Eckert: Adv. Eng. Mater., 2008, vol. 10, pp. 727–30.10.1002/adem.200800080 ↗
34. J.J. Lewandowski and A.L. Greer: Nat. Mater., 2006, vol. 5, pp. 15–18.10.1038/nmat1536 ↗
35. W.H. Jiang, H.H. Liao, F.X. Liu, H. Choo, and P.K. Liaw: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1822–30.10.1007/s11661-007-9321-4 ↗
36. G. Subhash and G. Ravichandran: ASM Handbook, Mechanical Testing and Evaluation, ASM INTERNATIONAL, Materials Park, OH, 2000, vol. 8, pp. 497–504.
37. W. Chen, G. Subhash, and G. Ravichandran: Dymat. J., 1994, vol. 1, pp. 193–210.
38. G. Ravichandran and G. Subhash: J. Am. Ceram. Soc., 1994, vol. 77, pp. 263–67.10.1111/j.1151-2916.1994.tb06987.x ↗
39. L.L. Wang: Foundation of Stress Waves, National Defence Industry Press, Beijing, 2005 (in Chinese).
40. H. Kolsky: Stress Wave in Solids, Dover Publications, New York, NY, 1963.
41. L.F. Liu, L.H. Dai, Y.L. Bai, and B.C. Wei: J. Non-Cryst. Solids, 2005, vol. 351, pp. 3259–70.10.1016/j.jnoncrysol.2005.07.030 ↗
42. C.A. Schuh, T.C. Hufnagel, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗