journal article·2012-06

Crystallography and Morphology of Niobium Carbide in As-Cast HP-Niobium Reformer Tubes

Karl G. Buchanan, Milo V. Kral

Publisher page

Abstract

The microstructures of two as-cast heats of niobium-modified HP stainless steels were characterized. Particular attention was paid to the interdendritic niobium-rich carbides formed during solidification of these alloys. At low magnifications, these precipitates are grouped in colonies of similar lamellae. Higher magnifications revealed that the lamellae actually obtain two distinct morphologies. The type I morphology exhibits broad planar interfaces with a smooth platelike shape. Type II lamellae have undulating interfaces and an overall reticulated shape. To provide further insight into the origin of these two different morphologies, the microstructure and crystallography of each have been studied in detail using high resolution scanning electron microscopy, transmission electron microscopy, various electron diffraction methods (electron backscatter diffraction (EBSD), selected area diffraction (SAD), and convergent beam electron diffraction (CBED)), and energy dispersive X-ray spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. E.A.A.G. Ribeiro, R. Papaleo, and J.R.C. Guimaraes: Metall. Trans. A, 1986, vol. 17A, pp. 691–96.10.1007/BF02643989 ↗
2. W.-T. Hou and R.W.K. Honeycombe: Mater. Sci. Technol., 1985, vol. 1, pp. 390–97.10.1179/026708385790124729 ↗
3. G.D. de Almeida Soares, L.H. de Almeida, T.L. da Silveira, and I. Le May: Mater. Charact., 1992, vol. 29, pp. 387–96.10.1016/1044-5803(92)90045-J ↗
4. L.H. De Almeida, A.F. Ribeiro, and I. Le May: Mater. Charact., 2002, vol. 49, pp. 219–29.10.1016/S1044-5803(03)00013-5 ↗
5. H. Wen-Tai and R.W.K. Honeycombe: Mater. Sci. Technol., 1985, vol. 1, pp. 385–89.10.1179/026708385790124756 ↗
6. www.jeol.com.
7. www.oxford-instruments.com.
8. www.gatan.com.
9. www.fei.com.
10. P. Villars and L.D. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1991.
11. V. Randle: The Measurement of Grain Boundary Geometry, Institute of Physics Pub., Bristol, PA, 1993, pp. 24–28.
12. A.P. Sutton and R.W. Balluffi: Interfaces in Crystalline Materials, Oxford Science Publications, Gloucestershire, 1996, pp. 17–20.
13. A. Hanson: Visualizing Quaternions, Morgan Kaufmann, San Francisco, CA, 2006, pp. 52–54.
14. P.B. Hirsch, A. Howie, R.B. Nicholson, D.W. Pashley, and M.J. Whelan: Electron Microscopy of Thin Crystals, 1st ed., Butterworths, London, 1965, pp. 311–15.
15. M.H. Loretto: Electron Beam Analysis of Materials, 2nd ed., Chapman & Hall, London, 1994, pp. 252–53.
16. X.Q. Wu, H.M. Jing, Y.G. Zheng, Z.M. Yao, W. Ke, and Z.Q. Hu: Mater. Sci. Eng., 2000, vol. A293, pp. 252–60.
17. F.G. Caballero, P. Imizcoz, V. Lopez, L.F. Alvarez, and C. García de Andrĕs: Mater. Sci. Technol., 2007, vol. 23, pp. 528–34.10.1179/174328407X168766 ↗
18. Q.Z. Chen, N. Jones, and D.M. Knowles: Acta Mater., 2002, vol. 50, pp. 1095–1112.10.1016/S1359-6454(01)00410-4 ↗
19. A.K. Bhambri, T.Z. Kattamis, and J.E. Morral: Metall. Trans. B, 1975, vol. 6B, pp. 523–37.10.1007/BF02913844 ↗
20. R.A.P. Ibanez, G.D. de Almeida Soares, L.H. de Almeida, and I. Le May: Mater. Charact., 1993, vol. 30, pp. 243–49.10.1016/1044-5803(93)90071-3 ↗
21. K.G. Buchanan and M.V. Kral: University of Canterbury, Christchurch, New Zealand, unpublished research, 2011.
22. S. Tin, T.M. Pollock, and W. Murphy: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1743–53.10.1007/s11661-001-0151-5 ↗
23. S. Tin and T.M. Pollock: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1953–67.10.1007/s11661-003-0160-7 ↗
24. W.R. Sun, J.H. Lee, S.M. Seo, S.J. Choe, and Z.Q. Hu: Mater. Sci. Eng., 1999, vol. A271, pp. 143–49.10.1016/S0921-5093(99)00189-6 ↗
25. R. Fernandez, J.C. Lecomte, and T.Z. Kattamis: Metall. Trans. A, 1978, vol. 9A, pp. 1381–86.10.1007/BF02661809 ↗
26. J. Chen, J.H. Lee, C.Y. Jo, S.J. Choe, and Y.T. Lee: Mater. Sci. Eng., 1998, A247, pp. 113–25.10.1016/S0921-5093(97)00761-2 ↗
27. L. Liu, F. Sommer, and H.Z. Fu: Scripta Metall., 1994, vol. 30, pp. 587–91.10.1016/0956-716X(94)90434-0 ↗
28. S.M. Seo, I.S. Kim, J.H. Lee, C.Y. Jo, H. Miyahara, and K. Ogi: Mater. Sci. Technol., 2008, vol. 24, pp. 110–14.
29. A. Formenti, A. Eliasson, A. Mitchell, and H. Fredriksson: High Temp. Mater. Process., 2005, vol. 24, pp. 239–58.10.1515/HTMP.2005.24.4.239 ↗
30. F.S. Yin, X.F. Sun, J.G. Li, H.R. Guan, and Z.Q. Hu: Scripta Mater., 2003, vol. 48, pp. 425–29.10.1016/S1359-6462(02)00446-3 ↗
31. K.A. Al-Jarba and G.E. Fuchs: Mater. Sci. Eng., 2004, A373, pp. 255–67.10.1016/j.msea.2004.01.030 ↗
32. J. Yang, Q. Zheng, X. Sun, H. Guan, and Z. Hu: J. Mater. Sci., 2006, vol. 41, pp. 6476–78.10.1007/s10853-006-0684-5 ↗
33. V.A. Wills and D.G. McCartney: Mater. Sci. Eng., 1991, vol. A145, pp. 223–32.10.1016/0921-5093(91)90252-I ↗
34. D.S. Zhou and G.J. Shiflet: Metall. Trans. A, 1992, vol. 23A, pp. 1259–69.10.1007/BF02665057 ↗
35. R. Elliott: Int. Met. Rev., 1977, vol. 22, pp. 161–86.10.1179/095066077791100363 ↗
36. F.C. Nunes, L.H. de Almeida, J. Dille, J.L. Delplancke, and I. Le May: Mater. Charact., 2007, vol. 58, pp. 132–42.10.1016/j.matchar.2006.04.007 ↗