Improving the fracture toughness of constituent phases and Nb-based in-situ composites by a computational alloy design approach
Source abstract
Abstract
A computational alloy design approach has been used to identify a ductile matrix for Nb-based in-situ composites containing Ti, Hf, Cr, Si, and Ge additions. Candidate alloys in the form of cast buttons were fabricated by arc melting. Coupon specimens were prepared and heated treated to vary the microstructure. Backscattered electron (BSE) microscopy, quantitative metallography, energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD) were utilized to characterize the morphology, volume fraction, composition, and crystallography of individual phases in the microstructure. The fracture toughness of the composites was characterized by three-point bending and compact-tension techniques, while the fracture toughness of individual phases in the in-situ composites was determined by an indentation technique. The composition, crystallography, and volume fraction of individual phases were correlated with the fracture-toughness results to assess (1) the role of constituent properties in the overall fracture resistance of the composites and (2) the effectiveness of the computational design approach. The results indicated that the effects of alloy addition and plastic constraint on fracture toughness were reasonably predicted, but the conditions for relaxing plastic constraint to attain higher fracture toughness were not achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. D.L. Anton and D.M. Shah: MRS Symp. Proc., 1990, vol. 194, pp. 175–82.10.1557/PROC-194-45 ↗
2. R.M. Nekkanti and D.M. Dimiduk: MRS Symp. Proc., 1990, vol. 194, pp. 175–82.10.1557/PROC-194-175 ↗
3. M.G. Mendiratta and D.M. Dimiduk: Metall. Trans. A, 1993, vol. 24A, pp. 501–04.10.1007/BF02657338 ↗
4. P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk: JOM, 1996, vol. 48, pp. 33–38.10.1007/BF03221360 ↗
5. M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, and H.A. Lipsitt: JOM, 1996, vol. 48, pp. 39–44.10.1007/BF03221361 ↗
6. B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801–08.10.1007/BF02595629 ↗
7. D.L. Davidson, K.S. Chan, and D.L. Anton: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3007–18.10.1007/BF02663850 ↗
8. K.S. Chan and D.L. Davidson: JOM, 1996, vol. 48(9), pp. 62–68.10.1007/BF03223078 ↗
9. P.R. Subramanian, M.G. Mendiratta, D.M. Dimiduk, and M.A. Stucke: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 1–13.10.1016/S0921-5093(97)00555-8 ↗
10. H.A. Lipsitt, M. Blackburn, and D.M. Dimiduk: in Intermetallic Compounds—Principles and Practice—Vol. 3, J. H. Westbrook and R.L. Fleischer, eds., John Wiley, New York, NY, 2002, pp. 471–99.10.1002/0470845856.ch23 ↗
11. B.P. Bewlay and M.R. Jackson: in Comprehensive Composite Materials, A Kelly and C. Zweben, eds. vol. 3, Metal Matrix Composites, T.W. Clyne, ed., Elsevier, New York, NY, 2000, vol. 3, pp. 579–613.
12. J.-C. Zhao, B.P. Bewlay, M.R. Jackson, and L.A. Peluso: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds. TMS, Warrendale, PA, 2001, pp. 483–91; also J.-C. Zhao: GE CR&D, Schenectady, NY, private communication, 2001.
13. P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk: MRS Symp. Proc., 1994, vol. 322, pp. 491–502.10.1557/PROC-322-491 ↗
14. B.P. Bewlay, M.R. Jackson, W.J. Reeder, and H.A. Lipsitt: MRS Symp. Proc., 1995, vol. 364, pp. 943–48.10.1557/PROC-364-943 ↗
15. J.D. Rigney, P.M. Singh, and J.J. Lewandowski: JOM, 1992, vol. 44(8), pp. 36–41.10.1007/BF03222301 ↗
16. J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall. Mater., 1995, vol. 43, pp. 1955–67.10.1016/0956-7151(94)00391-T ↗
17. K.S. Chan and D.L. Davidson: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 925–39.10.1007/s11661-999-0146-1 ↗
18. D.L. Davidson and K.S. Chan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2007–18.10.1007/s11661-999-0011-2 ↗
19. K.S. Chan: Mater. Sci. Eng., 2002, vols. A329–A331, pp. 513–22.10.1016/S0921-5093(01)01502-7 ↗
20. D.J. Thomas, K.A. Nibur, K.C. Chen, J.C. Cooley, L.B. Dauelsberg, W.L. Hults, and P.G. Kotula: Mater. Sci. Eng., 2002, vols. A329–A331, pp. 408–15.10.1016/S0921-5093(01)01614-8 ↗
21. D. Farkas, S.J. Zhou, C. Vacilhe, B. Mutasa, and J. Panova: J. Mater. Res., 1977, vol. 12, pp. 93–99.10.1557/JMR.1997.0015 ↗
22. D. Farkas: Mater. Sci. Eng., 1998, vol. A249, pp. 249–58.10.1016/S0921-5093(98)00513-9 ↗
23. U.V. Waghmare, E. Kaxiras, V.V. Bulatov, and M.S. Duesberry: Modelling Simul. Mater. Sci. Eng., 1998, vol. 6, pp. 493–506.10.1088/0965-0393/6/4/013 ↗
24. J.R. Rice: J. Mech. Phys. Solids, 1992, vol. 40, pp. 239–71.10.1016/S0022-5096(05)80012-2 ↗
25. K.S. Chan: Metall. Mater. Trans. A, 2001, vol. 32A pp. 2475–87.10.1007/s11661-001-0037-6 ↗
26. K.S. Chan: Mechanisms and Mechanics of Fracture: The John F. Knott Symp. W.O. Soboyejo, J.J. Lewandowski, and R.O. Ritchie, eds., TMS, Warrendale, PA, 2002, pp. 143–48.
27. P.B. Hirsch and S.G. Roberts: Phil. Mag. A, 1991, vol. 64, pp. 55–80.10.1080/01418619108206126 ↗
28. S.G. Roberts and A.S. Booth: Acta Mater., 1997, vol. 45, pp. 1045–53.10.1016/S1359-6454(96)00230-3 ↗
29. P.B. Hirsch and S.G. Roberts: in Cleavage Fracture, Proc. George R. Irwin Symp., Kwai S. Chan, ed., TMS, Warrendale, PA, 1997, pp. 137–45.
30. R.E. Peierls: Proc. Phys. Soc., 1940, vol. 52, pp. 34–37.10.1088/0959-5309/52/1/305 ↗
31. F.R.N. Nabarro: Proc. Phys. Soc., 1947, vol. 59, pp. 236–394.10.1088/0959-5309/59/2/309 ↗
32. K.S. Chan and D.L. Davidson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2717–27.10.1007/s11661-001-1024-7 ↗
33. K.S. Chan: Mater. Sci. Eng., 2002, vol. A337, pp. 59–66.10.1016/S0921-5093(02)00011-4 ↗
34. K.S. Chan: Southwest Research Institute, San Antonio, TX, unpublished research, 2003.
35. M.R. Jackson: General Electric Global Research Laboratories, Schenectady, NY, unpublished research and private communications, 1999.
36. J.N. Wang: Mater. Sci. Eng. A, 1996, vol. A206, pp. 259–69.10.1016/0921-5093(95)09982-4 ↗
37. J.N. Wang: Acta Mater., 1996, vol. 44, pp. 1541–46.10.1016/1359-6454(95)00273-1 ↗
38. G. Wang, B. Gleeson, and D.L. Douglass: Oxid. Met., 1991, vol. 35, pp. 333–48.10.1007/BF00664707 ↗
39. Y.-W. Kim: UES, Inc., Dayton, OH, unpublished research and private communications, 2000.
40. Annual Book of ASTM Standards, Vol. 03.01, ASTM E39-90, ASTM, Philadelphia, PA, 1995, pp. 412–42.
41. D.L. Davidson and A. Nagy: J. Phys. E, 1978, vol. 11, pp. 207–10.10.1088/0022-3735/11/3/010 ↗
42. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
43. P. Chantikul, G.R. Anstis, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 539–43.10.1111/j.1151-2916.1981.tb10321.x ↗
44. B.R. Lawn, A.G. Evans, and D.B. Marshall: J. Am. Ceram. Soc., 1980, vol. 63, pp. 574–81.10.1111/j.1151-2916.1980.tb10768.x ↗
45. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, U. K. 1991, pp. 283–87.
46. J.R. Brockenbrough and S. Suresh: J. Mech. Phys. Solids, 1987, vol. 35, pp. 721–42.10.1016/0022-5096(87)90052-4 ↗
47. S. Suresh: in Modeling of Plastic Deformation and Its Engineering Applications, 13th Risø Int. Symp. on Materials Science, S.I. Andersen, J.B. Bilde-Sørensen, N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, 1992, pp. 111–24.
48. Joint Committee on Powder Diffraction Files, International Center for Diffraction Data, Swarthmore, PA, 1992.
49. M.G. Mendiratta: UES, Dayton, OH, private communication, 2001.
50. P.M. Hazzledine, K.S. Kumar, D.B. Miracle, and A.G. Jackson: MRS Symp. Proc., 1993, vol. 288, pp. 591–96.10.1557/PROC-288-591 ↗
51. K.S. Chan: Proc. Thermec 2003, Mater. Science Forum, 2003, in press; also Southwest Research Institute, San Antonio, TX, unpublished results, 2003.
52. K. Ito, K. Ihara, K. Tanaka, M. Fujikura, and M. Yamaguchi: Intermetallics, 2001, vol. 9, pp. 591–602.10.1016/S0966-9795(01)00049-8 ↗
53. Y. Harada, M. Morinaga, J.I. Saito, and Y. Takagi: J. Phys: Condens. Matter., 1997, vol. 9, pp. 8011–30.10.1088/0953-8984/9/38/008 ↗
54. A.F. Bower and M. Ortiz: J. Mech. Phys. Solids, 1991, vol. 39, pp. 815–58.10.1016/0022-5096(91)90026-K ↗
55. K.S. Chan, D.L. Davidson, and D.L. Anton: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1797–808.10.1007/s11661-997-0110-x ↗
56. D.L. Davidson and K.S. Chan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 401–16.10.1007/s11661-002-0101-x ↗