Peak Stir Zone Temperatures during Friction Stir Processing
Source abstract
Abstract
The stir zone (SZ) temperature cycle was measured during the friction stir processing (FSP) of NiAl bronze plates. The FSP was conducted using a tool design with a smooth concave shoulder and a 12.7-mm step-spiral pin. Temperature sensing was accomplished using sheathed thermocouples embedded in the tool path within the plates, while simultaneous optical pyrometry measurements of surface temperatures were also obtained. Peak SZ temperatures were 990 °C to 1015 °C (0.90 to 0.97 TMelt) and were not affected by preheating to 400 °C, although the dwell time above 900 °C was increased by the preheating. Thermocouple data suggested little variation in peak temperature across the SZ, although thermocouples initially located on the advancing sides and at the centerlines of the tool traverses were displaced to the retreating sides, precluding direct assessment of the temperature variation across the SZ. Microstructure-based estimates of local peak SZ temperatures have been made on these and on other similarly processed materials. Altogether, the peak-temperature determinations from these different measurement techniques are in close agreement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metallurgy and Material Science · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: Great Britain Patent Application 9125978.8, Dec. 1991
2. U.S. Patent 5460317, Oct. 1995.
3. R.S. Mishra: Adv. Mater. Processes, 2003, vol. 161, pp. 43–46.
4. R.S. Mishra, Z.Y. Ma, and I. Charit: Mater. Sci. Eng., A, 2003, vol. 341, pp. 307–10.10.1016/S0921-5093(02)00199-5 ↗
5. T.J. Lienert, W.L. Stellwag, Jr., B.B. Grimmett, and R.W. Warke: Weld. J., 2003, vol. 82, pp. 1S–9S.10.1179/136217103225008847 ↗
6. L. Cui, H. Fujii, N. Tsuji, and K. Nogi: Scripta Mater., 2007, vol. 56, pp. 637–40.10.1016/j.scriptamat.2006.12.004 ↗
7. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng., A, 2006, vol. 419, pp. 389–96.10.1016/j.msea.2005.09.040 ↗
8. P. Vilaca, L. Quintino, J.F. dos Santos, R. Zettler, and S. Sheikhi: Mater. Sci. Eng., A, 2007, vols. 445–446, pp. 501–08.10.1016/j.msea.2006.09.091 ↗
9. K. Oh-Ishi and T.R. McNelley: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2951–61.10.1007/s11661-004-0242-1 ↗
10. K. Oh-Ishi and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1575–85.10.1007/s11661-005-0249-2 ↗
11. K. Oh-Ishi, A.P. Zhilyaev, and T.R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2239–51.10.1007/BF02586143 ↗
12. T.R. McNelley, K. Oh-Ishi, and A.P. Zhilyaev: in Friction Stir Welding and Processing, R.S. Mishra and M.W. Mahoney, eds., ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 155–73.
13. E.A. Culpan and G. Rose: Br. Corros. J., 1979, vol. 14, pp. 160–66.10.1179/bcj.1979.14.3.160 ↗
14. G.M. Weston: Survey of Nickel-Aluminum Bronze Casting Alloys for Marine Applications: Australia Department of Defence Report DSTO MRL-R807, Australia Department of Defence, Melbourne, Australia, 1981, pp. 1–38.
15. P. Brezina: Int. Met. Rev., 1982, vol. 27, pp. 77–120.10.1179/imr.1982.27.1.77 ↗
16. E.A. Culpan and G. Rose: J. Mater. Sci., 1978, vol. 13, pp. 1647–57.10.1007/BF00548728 ↗
17. G.W. Lorimer, F. Hasan, J. Iqbal, and N. Ridley: Br. Corros. J., 1986, vol. 21, pp. 244–48.10.1179/000705986798272046 ↗
18. D.M. Lloyd, G.W. Lorimer, and N. Ridley: Met. Technol., 1980, vol. 7, pp. 114–19.10.1179/030716980803286577 ↗
19. F. Hasan, G.W. Lorimer, and N. Ridley: Proc. Int. Conf. on Solid-to-Solid Phase Transformations, TMS, Warrendale, PA, 1982, pp. 745–49.
20. F. Hasan, A. Jahanafrooz, G.W. Lorimer, and N. Ridley: Metall. Trans. A, 1982, vol. 13A, pp. 1337–45.10.1007/BF02642870 ↗
21. F. Hasan, G.W. Lorimer, and N. Ridley: J. Phys., 1982, vol. 43, pp. C4653–C4658.
22. A. Jahanafrooz, F. Hasan, G.W. Lorimer, and N. Ridley: Metall. Trans. A, 1983, vol. 14A, pp. 1951–56.10.1007/BF02662362 ↗
23. F. Hasan, G.W. Lorimer, and N. Ridley: Met. Sci., 1983, vol. 17, pp. 289–95.10.1179/030634583790420826 ↗
24. F. Hasan, J. Iqbal, and N. Ridley: Mater. Sci. Technol., 1985, vol. 1, pp. 312–15.10.1179/mst.1985.1.4.312 ↗
25. P. Weill-Couly and D. Arnaud: Fonderie, 1973, No. 322, pp. 123–35.
26. J.L. Robbins, O.C. Shepard, and O.D. Sherby: J. Iron Steel Inst., 1964, vol. 202, pp. 804–07.
27. O.D. Sherby, B. Walser, C.M. Young, and E.M. Cady: Scripta Metall., 1975, vol. 9, pp. 569–73.10.1016/0036-9748(75)90352-X ↗
28. B. Walser and O.D. Sherby: Metall. Trans. A, 1979, vol. 10A, pp. 1461–71.10.1007/BF02812011 ↗
29. Metals Handbook: Properties and Selection of Nonferrous Metals and Special Purpose Materials, 10th ed., A. Cohen, ed., ASM INTERNATIONAL, Metals Park, OH, 1990, vol. 2, pp. 386–87.
30. Y. Rabin and D. Rittel: Exp. Mech., 1999, vol. 39 (2), pp. 132–36.10.1007/BF02331116 ↗
31. K.M. Garrity, D.C. Ripple, M. Araya, C.R. Cabrera, L. Cordova Murillo, M.E. de Vanegas, D.J. Gee, E. Guillén, S. Martinez-Martinez, E. Mendez-Lango, L. Mussio, S.G. Petkovic, K.N. Quelhas, G. Rangugni, O. Robatto, E. von Borries Rocha: Int. J Thermophys., 2008, vol. 29, pp. 1828–37.10.1007/s10765-007-0354-0 ↗
32. D. Rosenthal: Weld. J., 1941, vol. 20, pp. 220s-234s.
33. S. Kou: Welding Metallurgy, 2nd ed., J. Wiley, Hoboken, NJ, 2003, pp. 47–58.