journal article·2012-06

Effect of Postweld Heat Treatment on the Microstructure and Cyclic Deformation Behavior of Laser-Welded NiTi-Shape Memory Wires

C. W. Chan, H. C. Man, T. M. Yue

Publisher page

Abstract

NiTi wires of 0.5 mm diameter were laser welded using a CW 100-W fiber laser in an argon shielding environment with or without postweld heat-treatment (PWHT). The microstructure and the phases present were studied by scanning-electron microscopy (SEM), transmission-electron microscopy (TEM), and X-ray diffractometry (XRD). The phase transformation behavior and the cyclic stress–strain behavior of the NiTi weldments were studied using differential scanning calorimetry (DSC) and cyclic tensile testing. TEM and XRD analyses reveal the presence of Ni4Ti3 particles after PWHT at or above 623 K (350 °C). In the cyclic tensile test, PWHT at 623 K (350 °C) improves the cyclic deformation behavior of the weldment by reducing the accumulated residual strain, whereas PWHT at 723 K (450 °C) provides no benefit to the cyclic deformation behavior. Welding also reduces the tensile strength and fracture elongation of NiTi wires, but the deterioration could be alleviated by PWHT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Advanced Welding Techniques Analysis · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. T. Duerig, A. Pelton, and D. Stockel: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 149–60.10.1016/S0921-5093(99)00294-4 ↗
2. N.B. Morgan: Mater. Sci. Eng. A, 2004, vol. 378, pp. 16–23.10.1016/j.msea.2003.10.326 ↗
3. A. Ikai, K. Kimura, and H. Tobush: J. Intel. Mater. Syst. Struct., 1996, vol. 7, pp. 646–54.10.1177/1045389X9600700604 ↗
4. A. Tuissi, S. Besseghini, T. Ranucci, F. Squatrito, and M. Pozzi: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 813–17.10.1016/S0921-5093(99)00422-0 ↗
5. Y.T. Hsu, Y.R. Wang, S.K. Wu, and C. Chen: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 569–76.10.1007/s11661-001-0073-2 ↗
6. Y. Ogata, M. Takatugu, T. Kunimasa, K. Uenishi, and K.F. Kobayashi: Mater. Trans., 2004, vol. 45, pp. 1070–76.10.2320/matertrans.45.1070 ↗
7. A. Falvo, F. M. Furgiuele, and C. Maletta: Mater. Sci. Eng. A, 2005, vol. 412, pp. 235–40.10.1016/j.msea.2005.08.209 ↗
8. H. Gugel, A. Schuermann, and W. Theisen: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 668–71.10.1016/j.msea.2006.11.179 ↗
9. C.W. Chan and H.C. Man: Opt. Las. Eng., 2011, vol. 49, pp. 121–26.10.1016/j.optlaseng.2010.08.007 ↗
10. B. Tam, M.I. Khan, and Y. Zhou: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2166–75.10.1007/s11661-011-0639-6 ↗
11. P. Schlossmacher, T. Haas, and A. Shussler: J. Phys. IV Coll., C5, 1997, pp. 251–56.
12. Y. Zhou: Microjoining and Nanojoining, Woodhead Publishing, Ltd., Cambridge, United Kingdom, 2008, pp. 345.10.1533/9781845694043 ↗
13. C.W. Chan, H.C. Man, and T.M. Yue: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2264–70.10.1007/s11661-011-0623-1 ↗
14. M.I. Khan, S.K. Panda, and Y. Zhou: Mater. Trans., 2008, vol. 49, pp. 2702–08.10.2320/matertrans.MRA2008243 ↗
15. M.I. Khan and Y. Zhou: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6235–38.10.1016/j.msea.2010.06.025 ↗
16. M. Nishida, C.M. Wayman, and T. Honma: Metall. Trans., 1986, vol. 17A, pp. 1505–15.10.1007/BF02650086 ↗
17. S. Paula, K.K. Mahesh, C.M.L. dos Santos, F.M. Braz Fernandes, and C.S. Da Costa Viana: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 146–50.10.1016/j.msea.2007.02.142 ↗
18. D. Favier, Y. Liu, L.Orgeas, A. Sandel, L. Dobove, and P. Comte-Gaz: Mater. Sci. Eng. A, 2006, vol. 429, pp. 130–36.10.1016/j.msea.2006.05.018 ↗
19. K. Nurveren, A. Akdoğan, and W.M. Huang: J. Mater. Proc. Tech., 2008, vol. 196, pp. 129–34.10.1016/j.jmatprotec.2007.05.015 ↗
20. K.S. Kim, K.K. Jee, W.C. Kim, W.Y. Jang, and S.H. Han: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 658–61.10.1016/j.msea.2006.12.221 ↗
21. K.W.K. Yeung, K.M.C. Cheung, W.W. Liu, and C.Y. Chung: Mater. Sci. Eng. A, 2004, vol. 383, pp. 213–18.10.1016/j.msea.2004.05.063 ↗
22. X. Hunag and Y. Liu: Scripta Mater., 2001, vol. 45, pp. 153–60.10.1016/S1359-6462(01)01005-3 ↗
23. C.P. Frick, A.M. Ortega, J. Tyber, A. Maksound, H.J. Maier, Y. Liu, and K. Gall: Mater. Sci. Eng. A, 2005, vol. 405, pp. 34–49.10.1016/j.msea.2005.05.102 ↗
24. K. Gall, J. Tyber, G. Wilkesanders, S.W. Robertson, R.O. Ritchie, and H.J. Maier: Mater. Sci. Eng. A, 2008, vol. 486, pp. 389–403.10.1016/j.msea.2007.11.033 ↗
25. A. Yawny, J. Olbricht, M. Sade, and G. Eggeler: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 86–90.10.1016/j.msea.2007.04.124 ↗
26. X. Wang, B. Xu, and Z. Yue: J. Alloy. Compd., 2008, vol. 463, pp. 417–22.10.1016/j.jallcom.2007.09.029 ↗
27. K. Gall and H.J. Maier: Acta Mater., 2002, vol. 50, pp. 4643–57.10.1016/S1359-6454(02)00315-4 ↗
28. X. Li, J. Xie, and Y. Zhou: J. Mater. Sci., 2005, vol. 40, pp. 3437–43.10.1007/s10853-005-0447-8 ↗
29. K. Otsuka and C.M. Wayman: Shape Memory Material, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 49–96.
30. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed., vol. 3, ASM International, Materials Park, OH, 1990, pp. 2874.
31. K. Otsuka and T. Kakeshita: MRS Bulletin, 2002, vol. 27, pp. 91–100.10.1557/mrs2002.43 ↗
32. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
33. X.J. Yan, D.Z. Yang, and X.P. Liu: Mater. Char., 2007, vol. 58, pp. 262–66.10.1016/j.matchar.2006.05.001 ↗
34. M. Carroll, C. Somsen, and G. Eggeler: Scripta Mater., 2004, vol. 50, pp. 187–92.10.1016/j.scriptamat.2003.09.020 ↗
35. J. Michutta, Ch. Somsen, A. Yawny, A. Dlouhy, and G. Eggeler: Acta Mater., 2006, vol. 54, pp. 3525–42.10.1016/j.actamat.2006.03.036 ↗
36. E. Hornbogen, V. Mertinger, and D. Wurzel: Scripta Mater., 2001, vol. 44, pp. 171–78.10.1016/S1359-6462(00)00543-1 ↗
37. Z. Yang, W. Tirry, and D. Schryvers: Scripta Mater., 2005, vol. 52, pp. 1129–34.10.1016/j.scriptamat.2005.02.013 ↗
38. W. Tirry and D. Schryvers: Mater. Sci. Eng. A, 2004, vol. 378, pp. 157–60.10.1016/j.msea.2003.10.336 ↗
39. D. Holec, O. Bojda, and A. Dlouhý: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 462–65.10.1016/j.msea.2006.11.182 ↗
40. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
41. J. Uchil, K.G. Kumara, and K.K. Mahesh: Mater. Sci. Eng. A, 2002, vol. 332, pp. 25–28.10.1016/S0921-5093(01)01711-7 ↗
42. A.R. Pelton, J. DiCello, and S. Miyazaki: Min. Invas. Ther. Allied Technol., 2000, vol. 9, pp. 107–18.10.3109/13645700009063057 ↗
43. V.M. Radhakrishnan: Welding Technology and Design, 2nd ed., New Age International, New Delhi, India, 2006, pp. 175–203.
44. J.L. Proft, K.N. Melton, and T.W. Duerig: Proc. Int. Conf. on Martensitic Transformations, I. Tamura, ed., The Japan Inst. Metals, Nara, Japan, 1986, pp. 742–47.
45. F.T. Cheng: J. Mater. Sci. Tech., 2004, vol. 20, pp. 700–02.10.1179/026708304225011153 ↗