journal article·2012-12Open access

Microstructure of Low C Steel Isothermally Transformed in the M S to M f Temperature Range

Donghwi Kim, Seok-Jae Lee, Bruno C. De Cooman

Abstract

An isothermal transformation was observed when a fully austenitized lean-alloyed, low C steel was quenched to a temperature in the MS to Mf temperature range and held at the quenching temperature. The dilatometric analysis revealed that the isothermal transformation was distinct from the bainitic transformation. Internal friction (IF) measurements and X-ray diffraction (XRD) analysis showed that the dislocation density in the isothermal transformation product was larger than in lower bainite, and lower than in athermal martensite. Microstructural analysis by transmission electron microscopy (TEM) revealed that the isothermal transformation product had a specific microstructure consisting of large lath-type constituent units with wavy boundaries, with a Nishiyama–Wassermann orientation relationship (NW OR) with respect to the parent austenite. The isothermal transformation below MS proceeds by the thickening of athermally formed laths.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. D. Kim, J.G. Speer, H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2048–60.10.1007/s11661-009-9891-4 ↗
2. D. Kim, J.G. Speer, and B.C. De Cooman: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1575–85.10.1007/s11661-010-0557-z ↗
3. S.M.C. van Bohemen, M.J. Santofimia, and J. Sietsma: Scripta Mater., 2008, vol. 58, pp. 488–91.10.1016/j.scriptamat.2007.10.045 ↗
4. B.L. Averbach and M. Cohen: Trans. ASM, 1949 vol. 41, pp. 1024–60.
5. M. Oka and H. Okamoto: Metall. Trans. A, 1988, vol. 19A, pp. 447–52.10.1007/BF02649258 ↗
6. R.T. Howard and M. Cohen: Trans. AIME, 1948, vol. 176, pp. 384–400.
7. S.R. Pati and M. Cohen: Acta Metall., 1969, vol. 17, pp. 189–99.10.1016/0001-6160(69)90058-3 ↗
8. G. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
9. Z. Nishiyama: Sci. Rep. Tohoku Univ., 1934, vol. 23, pp. 637–64.
10. F.E. Fujita: Metall. Trans. A, 1977, vol. 8A, pp. 1727–36.10.1007/BF02646876 ↗
11. D. Mari, S. Bolognini, G. Feusier, T. Viatte, and W. Benoit: Int. J. Ref. Met. Hard Mater., 1999, vol. 17, pp. 209–25.10.1016/S0263-4368(98)00078-X ↗
12. R. Bagramov, D. Mari, and W. Benoit: Phil. Mag. A, 2001, vol. 81 (12), pp. 2797–2808.10.1080/01418610108217165 ↗
13. I. Tkalcec and D. Mari: Mater. Sci. Eng. A, 2004, vol. 370, pp. 213–17.10.1016/j.msea.2003.04.004 ↗
14. X.S. Guan, Y. Nishizawa, K. Okamura, H. Numakura, and M. Koiwa: Mater. Sci. Eng. A, 2004, vol. 370, pp. 73–77.10.1016/j.msea.2003.08.075 ↗
15. A.S. Nowick and B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York, NY, 1972, pp. 52–57.
16. L.B. Magalas, P. Moser, and I.G. Ritchie, J. Phys., 1983, vol. 12 (44), pp. 645–49.
17. L.B. Magalas: J. Phys. IV (Paris), 1996, vol. 6 (C8), pp. 163–72.
18. A. Seeger, M. Weller, J. Diehl, L. Pan, J. Zhang, and T. Kè: Z. Metallkd., 1982, vol. 73 (1), pp. 1–20.
19. Y. Liu: Acta Metall. Mater., 1994, vol. 42 (3), pp. 621–30.10.1016/0956-7151(94)90258-5 ↗
20. R. Ward and J.M. Capus: J. Iron Steel Inst., 1963, vol. 201, pp. 1038–43.
21. C.P. Kung and T.S. Kê: Scientia Sinica, 1957, vol. 6, p. 223.
22. G.J. Klems, R.E. Miner, F.A. Hultgren, and R. Gibala: Metall. Trans. A, 1976, vol. 7A, pp. 839–49.10.1007/BF02644081 ↗
23. P.G. Bordoni: Ric. Sci., 1949, vol. 19, pp. 851–62.
24. G. Fantozzi, C. Esnouf, W. Beniot, and I.G. Ritchie: Progr. Mater. Sci., 1982, vol. 27, pp. 311–451.10.1016/0079-6425(82)90003-2 ↗
25. G. Fantozzi and I.G. Ritchie: J. Phys., 1981, vol. 42 (C5), pp. 3–23.10.1051/jphyscol:1981501 ↗
26. I.G. Ritchie: Scripta Metall., 1982, vol. 16, pp. 249–53.10.1016/0036-9748(82)90344-1 ↗
27. J.J. Hoyos, A.A. Ghilarducci, H.R. Salva, C.A. Chaves, and J.M. Vélez: Mater. Sci. Eng. A, 2009, vols. 521–522, pp. 347–50.10.1016/j.msea.2008.09.088 ↗
28. K. Kamber, D. Keefer, and C. Wert: Acta Metall., 1961, vol. 9, pp. 403–14.10.1016/0001-6160(61)90134-1 ↗
29. T. Mura, I. Tamura, and J.O. Brittain: J. Appl. Phys., 1961, vol. 32 (1), pp. 92–96.10.1063/1.1735966 ↗
30. T.S. Kê: Scripta Metall., 1982, vol. 16, pp. 225–32.10.1016/0036-9748(82)90341-6 ↗
31. M. Weller: J. Phys., 1983, vol. 44, pp. 63–82.
32. I. Tkalcec and D. Mari: Def. Diff. Forum, 2002, vols. 203–205, pp. 253–56.10.4028/www.scientific.net/DDF.203-205.253 ↗
33. A. Seeger: Scripta Metall., 1982, vol. 16, pp. 241–47.10.1016/0036-9748(82)90343-X ↗
34. A. Seeger: Phys. Status Solidi (a), 1979, vol. 55 (2), pp. 457–68.10.1002/pssa.2210550213 ↗
35. S.V. Radcliffe and E.C. Rollason: J. Iron Steel Inst., 1959, vol. 191, pp. 56–65.
36. H. Okamoto and M. Oka: Metall. Trans. A, 1986, vol. 17A, pp. 1113–20.10.1007/BF02665309 ↗
37. M. Oka and H. Okamoto: Metall. Trans. A, 1988, vol. 19A, pp. 447–52.10.1007/BF02649258 ↗
38. J.W. Christian: The Theory of Transformations in Metals and Alloys, 2nd ed., Elsevier Science Ltd., Oxford, 2002, vol. 1, p. 546.
39. G. Nolze: Cryst. Res. Technol., 2006, vol. 41(1), pp. 72–77.10.1002/crat.200410533 ↗
40. G. Miyamoto, N. Takayama, and T. Furuhara: Scripta Mater., 2009, vol. 60, pp. 1113–16.10.1016/j.scriptamat.2009.02.053 ↗
41. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
42. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
43. A. Kobayashi and S.D. Sarma: Phys. Rev. B, 1987, vol. 35(5), pp. 8042–54.10.1103/PhysRevB.35.8042 ↗
44. Y. Gotoh and M. Uwaha: Jpn. J. App. Phys., 1987, vol. 26(1), pp. L17–L20.10.1143/JJAP.26.L17 ↗
45. Y. Gotoh and H. Fukuda: Surf. Sci., 1989, vol. 223, pp. 315–25.10.1016/0039-6028(89)90740-1 ↗
46. T. Ungár, I. Dragomir, Á. Révész, and A. Borbély: J. Appl. Cryst., 1999, vol. 32, pp. 992–1002.10.1107/S0021889899009334 ↗
47. T. Ungár and G. Tichy: Phys. Status Solidi (a), 1999, vol. 171, pp. 425–34.10.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
48. Á. Révész, T. Ungár, A. Borbély, and J. Lendvai: NanoStruc. Mater., 1996, vol. 7(7), pp. 779–88.10.1016/S0965-9773(96)00048-7 ↗
49. T. Ungár, I. Dragomir, Á. Révész, and A. Borbély: J. Appl. Cryst., 1999, vol. 32, pp. 992–1002.10.1107/S0021889899009334 ↗
50. G. Schoeck: Scripta Metall., 1982, vol. 16, pp. 233–39.10.1016/0036-9748(82)90342-8 ↗
51. G. Schoeck: Scripta Metall., 1988, vol. 22, pp. 389–94.10.1016/S0036-9748(88)80211-4 ↗
52. F.C. Frank: Acta Metall., 1953, vol. 1, pp. 15–21.10.1016/0001-6160(53)90005-4 ↗
53. H. Knapp and U. Dehlinger: Acta Metall., 1956, vol. 4, pp. 289–97.10.1016/0001-6160(56)90066-9 ↗