journal article·2006-11

Interactions between iron, manganese, and the Al-Si eutectic in hypoeutectic Al-Si alloys

C. M. Dinnis, J. A. Taylor, A. K. Dahle

Publisher page

Abstract

Sand-cast plates were used to determine the effect of iron and manganese concentrations on porosity levels in Al-9 pet Si-0.5 pet Mg alloys. Iron increased porosity levels. Manganese additions increased porosity levels in alloys with 0.1 pet Fe, but reduced porosity in alloys with 0.6 and I pet Fe. Thermal analysis and quenching were undertaken to determine the effect of iron and manganese on the solidification of the Al-Si eutectic. At high iron levels, the presence of large beta-Al5FeSi was found to reduce the number of eutectic nucleation events and increase the eutectic grain size. The preferential formation of alpha-Al15Mn3Si2 upon addition of manganese reversed these effects. It is proposed that this interaction is due to beta-Al5FeSi and the Al-Si eutectic having common nuclei. Porosity levels are proposed to be controlled by the eutectic grain size and the size of the iron-bearing intermetallic particles rather than the specific intermetallic phase that forms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A. Couture:Int. J. Cast Met., 1981, vol. 6, pp. 9–17.
2. P.N. Crepeau:AFS Trans., 1995, vol. 103, pp. 361–66.
3. T.O. Mbuya, B.O. Odera, and S.P. Ng’ang’a:Int. J. Cast Met. Res., 2003, vol. 16, pp. 451–65.10.1080/13640461.2003.11819622 ↗
4. C. Mascré:Fonderie, 1955, vol. 108, pp. 4330–36.
5. J.A. Taylor, G.B. Schaffer, and D.H. StJohn:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1651–55.10.1007/s11661-999-0102-0 ↗
6. H. Iwahori, H. Takamiya, K. Yonekura, Y. Yamamoto, and M. Nakamura:Imono, 1988, vol. 60, pp. 590–95.
7. L.A. Narayanan and F.H. Samuel:AFS Trans., 1992, vol. 100, pp. 383–91.
8. N. Roy, A.M. Samuel, and F.H. Samuel:Metall. Mater. Trans. A, 1996, vol. 27A, pp. 415–29.10.1007/BF02648419 ↗
9. A.M. Samuel, F.H. Samuel, C. Villeneuve, H.W. Doty, and S. Valtierra:Int. J. Cast Met. Res., 2001, vol. 14, pp. 97–120.10.1080/13640461.2001.11819429 ↗
10. J.A. Taylor, G.B. Schaffer, and D.H. StJohn:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1643–50.10.1007/s11661-999-0101-1 ↗
11. M.O. Otte:Porosity Formation in AlSi9Cu3 Alloy Castings: The Influence of Iron, Strontium, Sodium, Antimony and Bismuth, Mining, Minerals, and Materials Engineering, University of Queensland, Brisbane, 2000.
12. C.M. Dinnis, J.A. Taylor, A.K. Dahle, and W. Schneider:Giessereiforschung, 2005, vol. 57, pp. 2–10.
13. J.A. Taylor, G.B. Schaffer, and D.H. StJohn:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1657–62.10.1007/s11661-999-0103-z ↗
14. K. Nogita, S.D. McDonald, K. Tsujimoto, K. Yasuda, and A.K. Dahle:J. Electron Microsc., 2004, vol. 53, pp. 361–69.10.1093/jmicro/dfh048 ↗
15. A. Pennors, A.M. Samuel, F.H. Samuel, and H.W. Doty:AFS Trans., 1998, vol. 106, pp. 251–64.
16. A.M. Samuel, A. Pennors, C. Villeneuve, F.H. Samuel, H.W. Doty, and S. Valtierra:Int. J. Cast Met. Res., 2000, vol. 13, pp. 231–53.10.1080/13640461.2000.11819406 ↗
17. X. Cao and J. Campbell:Int. J. Cast Met. Res., 2000, vol. 13, pp. 175–84.10.1080/13640461.2000.11819400 ↗
18. X. Cao and J. Campbell:Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1409–20.10.1007/s11661-003-0253-3 ↗
19. L.F. Mondolfo:Manganese in Aluminium Alloys, The Manganese Centre, Neuilly sur Seine, France, 1978.
20. C. Villeneuve, A.M. Samuel, F.H. Samuel, H.W. Doty, and S. Valtierra:AFS Trans., 2001, vol. 109, pp. 39–60.
21. M. Dash and M. Makhlouf:J. Light Met., 2001, vol. 1, pp. 251–65.10.1016/S1471-5317(02)00002-0 ↗
22. G. Heiberg, K. Nogita, A.K. Dahle, and L. Arnberg:Acta Mater., 2002, vol. 50, pp. 2537–46.10.1016/S1359-6454(02)00081-2 ↗
23. S.D. McDonald, A.K. Dahle, J.A. Taylor, and D.H. St John:Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1829–37.10.1007/s11661-004-0091-y ↗
24. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. McDonald, and L.M. Hogan:Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–60.10.1007/s11661-001-0352-y ↗
25. C.M. Dinnis, A.K. Dahle, and J.A. Taylor:Mater. Sci. Eng., A, 2005, vol. 392, pp. 440–48.10.1016/j.msea.2004.10.037 ↗
26. S.D. McDonald, K. Nogita, and A.K. Dahle:Acta Mater., 2004, vol. 52, pp. 4273–80.10.1016/j.actamat.2004.05.043 ↗
27. M.A. Easton and D.H. St John:Acta Mater., 2001, vol. 49, pp. 1867–78.10.1016/S1359-6454(00)00368-2 ↗
28. L.F. Mondolfo:Aluminium Alloys: Structure and Properties, Butterworth and Co., London, 1976.
29. M.G. Day and A. Hellawell:J. Aust. Inst. Met., 1964, vol. 9, pp. 213–18.
30. C.M. Dinnis:Porosity Formation in Unmodified Al-Si-Mg-(Cu) Foundry Alloys: the Role of Iron and Manganese, University of Queensland, Brisbane, 2005, p. 43.
31. R.P. Taylor, S.T. McClain, and J.T. Berry:Int. J. Cast Met., 1999, vol. 11, pp. 247–57.10.1080/13640461.1999.11819281 ↗
32. D.C. Montgomery, G.C. Runger, and N.F. Hubele:Engineering Statistics, 2nd ed., John Wiley, New York, NY, 2001.
33. E.E. Underwood:Quantitative Stereology, Addison-Wesley, Reading, MA, 1970.
34. Q.S. Hamed, R. Elliott, and P.S. Cooper: inLight Met. 1992, San Diego, CA, 1–5 March 1992, pp. 1391–97.
35. O. Nielsen, L. Arnberg, A. Mo, and H. Thevik:Mater. Sci. Forum, 2000, vols. 329–330, pp. 43–48.10.4028/www.scientific.net/MSF.329-330.43 ↗