journal article·2015-02

Revealing the Intrinsic Nanohardness of Lath Martensite in Low Carbon Steel

B. B. He, M. X. Huang

Publisher page

Abstract

The mechanical property of martensite blocks in low carbon steel is studied by nanoindentation combined with scanning electron microscopy, electron backscattered diffraction, and transmission electron microscopy. The average nanohardnesses of small and large martensite blocks are 6.9 and 5.4 GPa, respectively. A size effect that the smaller is stronger is thus observed. This size effect was ascribed to the different formation sequence of martensite blocks during quenching. Therefore, the present work suggests that the as-quenched martensite may be considered as a composite material with the small but strong martensite blocks embedded in the large but soft martensite block matrix, which is important information for modeling the tensile stress–strain behavior of martensitic steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. L. Qi, A.G. Khachaturyan, and J.W. Morris: Acta Mater., 2014, vol. 76, pp. 23–39.10.1016/j.actamat.2014.04.038 ↗
2. X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, and L. Wang: Scripta Mater., 2013, vol. 68, pp. 321–24.10.1016/j.scriptamat.2012.11.003 ↗
3. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
4. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
5. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
6. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng. A, 2006, vol. 438, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
7. T. Ohmura, K. Tsuzaki, and S. Matsuoka: Scripta Mater., 2001, vol. 45, pp. 889–94.10.1016/S1359-6462(01)01121-6 ↗
8. B.B. He, K. Zhu, and M.X. Huang: Philos. Mag. Lett., 2014, pp. 1–8.
9. C. Ohlund, E. Schlangen, and S.E. Offerman: Mater. Sci. Eng. A, 2013, vol. 560, pp. 351–57.10.1016/j.msea.2012.09.078 ↗
10. T. Ohmura, K. Tsuzaki, and S. Matsuoka: Philos. Mag. A, 2002, vol. 82, pp. 1903–10.
11. T. Ohmura, T. Hara, and K. Tsuzaki: Scripta Mater., 2003, vol. 49, pp. 1157–62.10.1016/j.scriptamat.2003.08.025 ↗
12. T. Ohmura, T. Hara, and K. Tsuzaki: J. Mater. Res., 2003, vol. 18, pp. 1465–70.10.1557/JMR.2003.0201 ↗
13. T. Ohmura, A.M. Minor, E.A. Stach, and J. W. Morris: J. Mater. Res., 2004, vol. 19, pp. 3626–32.10.1557/JMR.2004.0474 ↗
14. B.B. He, W. Xu, and M.X. Huang: Mater. Sci. Eng. A, 2014, vol. 609, pp. 141–46.10.1016/j.msea.2014.04.108 ↗
15. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
16. Y.C. Liu, F. Sommer, and E.J. Mittemeijer: Acta Mater., 2003, vol. 51, pp. 507–19.10.1016/S1359-6454(02)00434-2 ↗
17. T.A. Kop, J. Sietsma, and S. Van Der Zwaag: J. Mater. Sci., 2001, vol. 36, pp. 519–26.10.1023/A:1004805402404 ↗
18. H.K.D.H. Bhadeshia and R. Honeycombe: Steels: Microstructure and Properties, 3rd ed., Butterworth-Heinemann, Oxford, United Kingdom, 2006.
19. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
20. B.B. He, M.X. Huang, A.H.W. Ngan, and S. Van Der Zwaag: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4875–81.10.1007/s11661-014-2435-6 ↗
21. K.L. Johnson: Contact Mechanics, Cambridge University Press, Cambridge, United Kingdom, 1985.10.1017/CBO9781139171731 ↗
22. S. Shim, H. Bei, E.P. George, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–98.10.1016/j.scriptamat.2008.07.026 ↗
23. F. Lani, Q. Furnémont, T. Van Rompaey, F. Delannay, P.J. Jacques, and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 3695–3705.10.1016/j.actamat.2007.02.015 ↗
24. A. Barnoush: Acta Mater., 2012, vol. 60, pp. 1268–77.10.1016/j.actamat.2011.11.034 ↗
25. G. Miyamoto, A. Shibata, T. Maki, and T. Furuhara: Acta Mater., 2009, vol. 57, pp. 1120–31.10.1016/j.actamat.2008.10.050 ↗
26. K. Durst, B. Backes, O. Franke, and M. Göken: Acta Mater., 2006, vol. 54, pp. 2547–55.10.1016/j.actamat.2006.01.036 ↗
27. S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki: ISIJ Int., 2005, vol. 45, pp. 91–94.10.2355/isijinternational.45.91 ↗
28. W.T. Read and W. Shockley: Phys. Rev., 1950, vol. 78, pp. 275–89.10.1103/PhysRev.78.275 ↗
29. W.A. Soer, K.E. Aifantis, and J.T.M. De Hosson: Acta Mater., 2005, vol. 53, pp. 4665–76.10.1016/j.actamat.2005.07.001 ↗
30. B.B. He, M.X. Huang, Z.Y. Liang, A.H.W. Ngan, H.W. Luo, J. Shi, W.Q. Cao, and H. Dong: Scripta Mater., 2013, vol. 69, pp. 215–18.10.1016/j.scriptamat.2013.03.030 ↗