The Role of Microstructure on Ductility of Die-Cast AM50 and AM60 Magnesium Alloys
Source abstract
Abstract
Die-cast AM50 and AM60 magnesium alloys have been examined to determine the fracture processes in bending and tension and to elucidate the influences of microstructure and porosity distribution on mechanical properties. The effect of section thickness has been explored using 2-, 6-, and 10-mm-thick die-cast plates. The processes of damage accumulation in terms of crack initiation, growth, and linkage leading to eventual failure have been studied qualitatively using progressive tensile straining experiments and three-point bend studies. The presence of a heterogeneous distribution of porosity played a critical role in the observed differences between strains to fracture in tension and in bending. More rapid damage accumulation at lower strains was observed in the high porosity regions with the rate of damage accumulation strongly dependent on the loading mode. Fracture processes at the microstructural level were characterized by scanning electron microscopy using an in-situ bending fixture. Crack initiation and growth occurred predominantly in the interdendritic eutectic regions, both in the presence of porosity and, to a lesser extent, in pore-free regions. The role of porosity volume fraction and distribution on ductility in these alloys has been examined using a modified Brown–Embury model. This model allows the prediction of fracture location in either loading mode by predicting the critical strains for the onset of cracking in differently strained regions of the test samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Magers D., Willekens J. (1998) Werkstoff-Informationsgesellschaft. In: Mordike B.L., Kainer K.U. (eds) Magnesium Alloys and Their Applications. Wolfsburg, Germany, pp. 247–52
2. D.J. Sakkinen: SAE Technical Paper No. 940779, SAE, Detroit, MI, 1994
3. Mordike B.L., Ebert T. (2001) Mater. Sci. Eng. A302:37–4510.1016/S0921-5093(00)01351-4 ↗
4. Allsop D.F., Kennedy D. (1983) Pressure Die Casting Part 2: The Technology of the Casting and the Die. Pergamon Press, New York, NY
5. H. Mao, J. Brevick, C. Mobley, V. Chandrasekar, D. Rodrigo, M. Murray, and R. Esdaile: SAE Technical Paper No. 1999–01-0928, SAE, Detroit, MI, 1999
6. D. Rodrigo, M. Murray, H. Mao, J. Brevick, C. Mobley, V. Chandrasekar, and R. Esdaile: SAE Technical Paper No. 1999-01-0927, SAE, Detroit, MI, 1999
7. T.K. Aune, D.L. Albright, and H. Westengen: SAE Technical Paper No. 900792, SAE, Detroit, MI, 1990
8. A.L. Bowles: Ph.D. Thesis, The University of Queensland, Queensland, Australia, 2002
9. Wang R.M., Eliezer A., Gutman E.M. (2003) Mater. Sci. Eng. A 355(1–2):201–2010.1016/S0921-5093(03)00065-0 ↗
10. Shan Z., Gokhale Arun M. (2003) Mater. Sci. Eng. A 361: 267–7410.1016/S0921-5093(03)00529-X ↗
11. S. Sannes, H. Gjestland, H. Westengen, H.I. Laukli, and O. Lohne: SAE Technical Paper No. 2003-01-0183, SAE, Detroit, MI, 2003
12. Dahle A.K., Lee Y.C., Nave M.D., Schaffer P.L., St. John D.H. (2001) J. Light Met. 1:61–7210.1016/S1471-5317(00)00007-9 ↗
13. Dahle A.K., Sannes S., St. John D.H., Westengen H. (2001) J. Light Met. 1:99–10310.1016/S1471-5317(01)00002-5 ↗
14. Dahle A.K., St. John D.H. (1999) Acta Mater. 47:31–4110.1016/S1359-6454(98)00342-5 ↗
15. Haiping Cao and Magnus Wessén: 11th Magnesium Automotive and End User Seminar, Aalen, Germany, 2003
16. Lee C.D. (2002) Met. Mater. Int. 8(3):283–8810.1007/BF03186097 ↗
17. Liu Z., Chen L., Zhao H., Wang Y., Wang Z., Klein F. (2000) Metall 54:122–25
18. A.L. Bowles, J.R. Griffiths, and C.J. Davidson: Magnesium Technology 2001, New Orleans, LA, 2001, J. Hryn, ed., TMS, Warrendale, PA, 2001, pp. 161–6810.1002/9781118805497.ch29 ↗
19. Easton M., Abbott T., Caceres C. (2003) Mater. Sci. Forum 419–422:47–52
20. Abott T., Easton M., Song W. (2003) Mater. Sci. Forum 419–422:141–4610.4028/www.scientific.net/MSF.419-422.141 ↗
21. A. Stich and H.G. Haldenwager: Magnesium 2000, Proc. 2nd Israeli Int. Conf. on Magnesium Science and Technology, Dead Sea, Israel, 2000, E. Aghion and D. Eliezer, eds., 2000, pp. 27–34
22. Schindelbacher G., Rosch R. (1998) Werkstoff-Informationsgesellschaft. In: Mordike B.L., Kainer K.U. (eds) Magnesium Alloys and Their Applications. Wolfsburg, Germany, pp. 247–52
23. B.J. Coultes, J.T. Wood, G. Wang, and R. Berkmortel: Magnesium Technology 2003, H.I. Kaplan, ed., San Diego, CA, 2003, TMS, Warrendale, PA, 2003, pp. 45–50
24. Liu Y.Z., Wang Q.D., Ding W.J., Zeng X.Q., Zhu Y.P. (2000) Mater. Lett. 44:265–6810.1016/S0167-577X(00)00041-0 ↗
25. Regener D., Schick E., Wagner I., Heyse H. (1999) Materialwissenschaft Werkstofftechnik 30: 525–32 (in German)10.1002/(SICI)1521-4052(199909)30:9<525::AID-MAWE525>3.0.CO;2-T ↗
26. Haiping Cao and Magnus Wessén: private communication
27. M.D. Nave, A.K. Dahle, and D.H. St John: Magnesium Technology 2000, Nashville, TN, 2000, H.I. Kaplan, J. Hryn, and B. Clow, eds., TMS, Warrendale, PA, 2000, pp. 233–4210.1002/9781118808962.ch33 ↗
28. L.M. Brown and J.D. Embury: Proc. Int. Conf. on Microstructure and Design of Alloys, London, 1973, Institute of Metals and Iron and Steel Institute, London, 1973, vol. 1, pp. 164–69
29. Jung J.Y. (2002) Phil. Mag. A 82(11):2263–6810.1080/01418610208235737 ↗