Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions
Source abstract
Abstract
The effect of the tempering heat treatment, including heating prior to the isothermal step, on carbide precipitation has been determined in a 2.25 Cr-1 Mo bainitic steel for thick-walled applications. The carbides were identified using their amount of metallic elements, morphology, nucleation sites, and diffraction patterns. The evolution of carbide phase fraction, morphology, and composition was investigated using transmission electron microscopy, X-ray diffraction, as well as thermodynamic calculations. Upon heating, retained austenite into the as-quenched material decomposes into ferrite and cementite. M7C3 carbides then nucleate at the interface between the cementite and the matrix, triggering the dissolution of cementite. M2C carbides precipitate separately within the bainitic laths during slow heating. M23C6 carbides precipitate at the interfaces (lath boundaries or prior austenite grain boundaries) and grow by attracting nearby chromium atoms, which results in the dissolution of M7C3 and, depending on the temperature, coarsening, or dissolution of M2C carbides, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Y. Murakami, T. Nomura, J. Watanabe, Application of 21/4Cr-1Mo steel for thick-wall pressure vessels (ASTM, Denver, 1982), pp. 383–41710.1520/STP28425S ↗
2. D.T. Blagoeva, L. Debarberis, M. Jong, P. ten Pierick, Int. J. Press. Vessel. Pip. 122, 1–5 (2014)10.1016/j.ijpvp.2014.06.001 ↗
3. R.G. Baker, J. Nutting, J. Iron Steel Inst. 7, 257–68 (1959)
4. B.J. Cane, Met. Sci. 10, 29–34 (1976)10.1179/030634576790431435 ↗
5. P. Parameswaran, M. Vijayalakshmi, V.S. Raghunathan, High Temp. Mater. Process 21, 251–67 (2003)10.1515/HTMP.2002.21.5.251 ↗
6. D.R. Mitchell, C. Ball, Mater. Charact. 47, 17–26 (2001)10.1016/S1044-5803(01)00147-4 ↗
7. V. Jayan, M.Y. Khan, M. Hussain, Mater. Sci. Technol. 19, 1546–52 (2003)10.1179/026708303225007889 ↗
8. R.C. Thomson, H.K.D.H. Bhadeshia, Mater. Sci. Technol. 10, 193–203 (1994)10.1179/mst.1994.10.3.193 ↗
9. A. Výrostková, A. Kroupa, J. Janovec, M. Svoboda, Acta Mater. 46, 31–38 (1998)10.1016/S1359-6454(97)00238-3 ↗
10. J. Janovec, M. Svoboda, A. Výrostková, A. Kroupa, Mater. Sci. Eng. A 402, 288–93 (2005)10.1016/j.msea.2005.04.048 ↗
11. J. Yu, Metall. Trans. A 20A, 1561–64 (1989)10.1007/BF02665512 ↗
12. J.M. Leitnaker, R.L. Klueh, W.R. Laing, Metall. Trans. A 6A, 1949–55 (1975)10.1007/BF02646861 ↗
13. J.R. Yang, C.Y. Huang, C.N. Yang, J.L. Horng, Mater. Charact. 30, 75–88 (1993)10.1016/1044-5803(93)90011-J ↗
14. J. Pilling, N. Ridley, Metall. Trans. A 13A, 557–63 (1982)10.1007/BF02644419 ↗
15. S. Depinoy: Microstructural Evolution of a 2.25Cr - 1 Mo Steel during Austenitization and Temper: Austenite Grain Growth, Carbide Precipitation Sequence and Effects on Mechanical Properties, PhD Dissertation, ENSMP, Paris, France, 2015
16. S. Dépinoy, B. Marini, C. Toffolon-Masclet, F. Roch, and A.-F. Gourgues-Lorenzon: Metall. Mater. Trans. A, 2017. doi:10.1007/s11661-017-4002-410.1007/s11661-017-4002-4 ↗
17. H.-O. Andrén, G. Cai, L.-E. Svensson, Appl. Surf. Sci. 87–88, 200–06 (1995)10.1016/0169-4332(94)00491-9 ↗
18. K. Dawson: Dissimilar Metal Welds. PhD dissertation, University of Liverpool, United Kingdom, 2012
19. M. Pelletier: Study of Structural Transformations Occuring in Low Carbon Chromium-Molybdenum Ferritic Steels: Influence of Small Additions of Vanadium and Molybdenum PhD dissertation, Paris-Sud University, Orsay, France. In French. 1981
20. V.A. Bišs, T. Wada, Metall. Trans. A 16A, 109–14 (1985)10.1007/BF02656718 ↗
21. E. Parthé, V. Sadogopan, Acta Crystallogr. 16, 202–05 (1963)10.1107/S0365110X63000487 ↗
22. R.A. Stevens, D. Lonsdale, J. Mater. Sci. 20, 3631–38 (1985)10.1007/BF01113770 ↗
23. R.L. Klueh, J.M. Leitnaker, Metall. Trans. A 6A, 2089–93 (1975)10.1007/BF03161835 ↗
24. http://matcalc.at. Accessed 09 February 2017
25. V. Jayan, P.K. Mandal, M. Hirani, S.K. Sanyal, Mater. Sci. Technol. 15, 1308–16 (1999)10.1179/026708399101505266 ↗
26. P. Parameswaran, M. Vijayalakshmi, P. Shankar, V.S. Raghunathan, J. Mater. Sci. 28, 5426–34 (1993)10.1007/BF00367811 ↗
27. C.J. Moss, P.M. Kelly, Fatigue Fract. Eng. Mater. Struct. 17, 369–80 (1994)10.1111/j.1460-2695.1994.tb00237.x ↗
28. M.C. Murphy, G.D. Branch, J. Iron Steel Inst. 209, 546–61 (1971)
29. C.S. Kim, I.K. Park, K.Y. Jhang, NDT E Int. 42, 204–09 (2009)10.1016/j.ndteint.2008.09.002 ↗
30. N. Gope, A. Chatterjee, T. Mukherjee, D.S. Sarma, Metall. Trans. A 24A, 315–26 (1993)10.1007/BF02657318 ↗
31. H.J. Chang, J.J. Kai, Scripta Metall. Mater. 24, 2101–06 (1990)10.1016/0956-716X(90)90493-Z ↗
32. A.M. Abdel-Latif, J.M. Corbett, D.M.R. Taplin, Met. Sci. 16, 90–96 (1982)10.1179/030634582790427181 ↗
33. E.M. Mazzer, C.R.M. Afonso, M. Galano, C.S. Kiminami, C. Bolfarini, J. Alloys Compd. 579, 169–73 (2013)10.1016/j.jallcom.2013.06.055 ↗
34. D.J. Dyson, K.W. Andrews, J. Iron Steel Inst. 207, 208–19 (1969)
35. H. Yaguchi, S. Murakami, N. Fujitsuna, T. Shinya, M. Yamada, T. Sakai, Tetsu-to-Hagane 91, 888–96 (2005)10.2355/tetsutohagane1955.91.12_888 ↗
36. J. Yu, C.J. McMahon, Metall. Trans. A 11A, 277–89 (1980)10.1007/BF02660632 ↗
37. T. Wada, V.A. Bišs, Metall. Trans. A 14A, 845–55 (1983)10.1007/BF02644287 ↗
38. J. Nutting, Advanced Heat Resistant Steels for Power Generation, San Sebastian, Spain, 1998, pp. 1–20
39. A. Inoue, T. Masumoto, Metall. Trans. A 11A, 739–47 (1980)10.1007/BF02661203 ↗
40. E. Kozeschnik, Scripta Mater. 59, 1018–21 (2008)10.1016/j.scriptamat.2008.07.008 ↗