Stochastic Multi-Scale Reconstruction of 3D Microstructure Consisting of Polycrystalline Grains and Second-Phase Particles from 2D Micrographs
Source abstract
Abstract
An accurate knowledge of the 3D polycrystalline microstructure of a material is crucial to its property prediction, performance optimization, and design. Here, we present a multi-scale computational scheme that allows one to stochastically reconstruct the 3D microstructure of a highly heterogeneous polycrystalline material with large variation in grain size, morphology, and spatial distribution, as well as the distribution of second-phase particles, from single-2D electron back-scattered diffraction (EBSD) micrograph. Specifically, the two-point correlation functions S 2 are employed to statistically characterize grain morphology, orientation, and spatial distribution and are incorporated into the simulated annealing procedure for microstructure reconstruction. During the reconstruction, the original polycrystalline microstructure is coarsened such that the large grains are reconstructed first and the smaller ones are generated later. The second-phase particles are then inserted into the reconstructed polycrystalline material based on the pair-correlation function g 2 sampled from the 2D back-scattered electron micrograph. The utility of our multi-scale scheme is demonstrated by successfully reconstructing a highly heterogeneous polycrystalline Sn-rich solder joint with Cu6Sn5 intermetallic particles. The accuracy of our reconstruction is ascertained by comparing the virtual microstructure with the actual 3D structure of the joint obtained via serial sectioning techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Aluminum Alloy Microstructure Properties · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. A. D. Rollett, S. B. Lee, R. Campman, and G. S. Rohrer: Annu. Rev. Matter. Res., 2007, vol. 37, pp. 627-38.10.1146/annurev.matsci.37.052506.084401 ↗
2. D. M. Saylor, J. Fridy, B. S. El-Dasher, K-Y. Jung, and A. D. Rollett: Metal. Mater. Trans. A, 2004, vol. 35A, p. 1969.10.1007/s11661-004-0146-0 ↗
3. A. Brahme, M. H. Alvi, D. Saylor, J. Fridy, and A. D. Rollett: Scripta Mater., 2006, vol. 55, pp. 75-80.10.1016/j.scriptamat.2006.02.017 ↗
4. M. Groeber, S. Ghosh, M. D. Uchic, and D. M. Dimiduk: Acta Mater., 2008, vol. 56, pp. 1257-1273.10.1016/j.actamat.2007.11.041 ↗
5. M. Groeber, S. Ghosh, M. D. Uchic, and D. M. Dimiduk: Acta Mater., 2008, vol. 56, pp. 1274-1287.10.1016/j.actamat.2007.11.040 ↗
6. Ochoa, F., J.J. Williams, and N. Chawla: Journal of Electronic Materials, 2003, vol. 32, pp. 1414-1420.10.1007/s11664-003-0109-z ↗
7. Ochoa, F., X. Deng, and N. Chawla: Journal of Electronic Materials, 2004, vol. 33, pp. 1596-1607.10.1007/s11664-004-0103-0 ↗
8. Zou, H., Q. Zhu, and Z. Zhang: Journal of Alloys and Compounds, 2008, vol. 461, pp. 410-417.10.1016/j.jallcom.2007.07.001 ↗
9. J.F. Hobart: Brazing and Soldering, 1906.
10. Harrison, M.R., J.H. Vincent, and H.A.H. Steen: Soldering & Surface Mount Technology, 2001, vol. 13, pp. 21-38.10.1108/09540910110407388 ↗
11. Abtew, M. and G. Selvaduray: Materials Science and Engineering: R: Reports, 2000, vol. 27, pp. 95-141.10.1016/S0927-796X(00)00010-3 ↗
12. Wood, E.P. and K.L. Nimmo: Journal of Electronic Materials, 1994, vol. 23, pp. 709-713.10.1007/BF02651363 ↗
13. Tu, K.N. and K. Zeng: Materials Science and Engineering: R: Reports, 2001, vol. 34, pp. 1-58.10.1016/S0927-796X(01)00029-8 ↗
14. K. B. Gilleo: Area Array Package Design: Techniques in High Density Electronics, McGraw Hill Professional, 2003.
15. M. Lu, D.-Y. Shih, P. Lauro, C. Goldsmith, and D. W. Henderson: Applied Physics Letters, 2008, vol. 92, p. 211909.10.1063/1.2936996 ↗
16. D. Yang, B. Y. Wu, Y. C. Chan, and K. N. Tu: Journal of Applied Physics, 2007, vol. 102, p. 043502.10.1063/1.2769270 ↗
17. Y. Xia, X. Xie, C. Lu, and J. Chang: Journal of Alloys and Compounds, 2006, vol. 417, pp. 143-149.10.1016/j.jallcom.2005.09.051 ↗
18. Bertheau, F. Hodaj, N. Hotellier, and J. Charbonnier: Intermetallics, 2014, vol. 51, pp. 37-47.10.1016/j.intermet.2014.02.012 ↗
19. M. Dudek and N. Chawla: Materials Characterization, 2008, vol. 59, pp. 1364-1368.10.1016/j.matchar.2007.10.008 ↗
20. K. Yazzie, J. Williams, N. Phillips, F. De Carlo, and N. Chawla: Materials Characterization, 2012, vol. 70, pp. 33-41.10.1016/j.matchar.2012.05.004 ↗
21. M. Maleki, J. Cugnoni, and J. Botsis: EnglishJournal of Electronic Materials, 2014, vol. 43, pp. 1026–1042.10.1007/s11664-014-3017-5 ↗
22. H. Tsuritani, T. Sayama, Y. Okamoto, T. Takayanagi, K. Uesugi, and T. Mori: Journal of Electronic Packaging, 2011, vol. 133, p. 021007.10.1115/1.4003992 ↗
23. Torquato, S.: Random Heterogeneous Materials: Microstructure and Macroscopic Properties, Springer, New York, 2002.10.1007/978-1-4757-6355-3 ↗
24. Yeong, C. L. Y., and S. Torquato: Physical Review E, 1998, vol. 57.1, p. 495.10.1103/PhysRevE.57.495 ↗
25. Yeong, C. L. Y., and S. Torquato: Physical Review E, 1998, vol. 58.1, p. 224.10.1103/PhysRevE.58.224 ↗
26. D. M. Saylor, B. S. El-Dasher, A. D. Rollett, and G. S. Rohrer: Acta Mater., 2004, vol. 52, pp. 3649-3655.10.1016/j.actamat.2004.04.018 ↗
27. M. E. Frary, and C. A. Schuh: Phys Rev E, 2007, vol. 76, p. 041108.10.1103/PhysRevE.76.041108 ↗
28. S. E. Wilding, D. T. Fullwood: Comput Mater Sci, 2011, vol. 50, pp. 2262-2272.10.1016/j.commatsci.2011.03.003 ↗
29. P.G. Callahan: Ph.D. Dissertation, Carnegie Mellon University, 2012.
30. S. R. Niezgoda, R. K. Kanjaria, and S. R. Kalidindi: Inter Mater Manu Innov, 2013, vol. 2, p. 3.10.1186/2193-9772-2-3 ↗
31. D. Li: JOM, 2014, vol. 66, p. 444.10.1007/s11837-013-0848-0 ↗
32. B. L. Hansen, B. L. Adams, M. E. Lyon, and A. J. Henrie: J. Computer-Aided Materials Design, 2003, vol. 10, pp. 163-173.10.1007/s10820-005-0884-3 ↗
33. D. T. Fullwood, S. R. Niezgoda, and S. R. Kalidindi: Acta. Mater., 2008, vol. 56, pp. 942-948.10.1016/j.actamat.2007.10.044 ↗
34. S. Singh, J. J. Williams, Y. Jiao and N. Chawla: Metallurgical and Materials Transactions A, 2012, vol. 43, p. 4470.10.1007/s11661-012-1451-7 ↗
35. Y. Jiao and N. Chawla: Journal of Applied Physics, 2014, vol. 115, p. 093511.10.1063/1.4867611 ↗
36. K. M. Gerke, M. V. Karsanina, R. V. Vasilyev, and D. Mallants: EPL, 2014, vol. 106, p. 66002.10.1209/0295-5075/106/66002 ↗
37. Y. Jiao, F. H. Stillinger, S. Torquato: Phys. Rev. E, 2008, vol. 77, p. 031135.10.1103/PhysRevE.77.031135 ↗
38. Y. Jiao, F. H. Stillinger, S. Torquato: Phys. Rev. E, 2010, vol. 81, p. 011105.10.1103/PhysRevE.81.011105 ↗
39. Y. Jiao, F. H. Stillinger, S. Torquato: Phys. Rev. E, 2010, vol. 82, p. 011106.10.1103/PhysRevE.82.011106 ↗
40. C. Gommes, Y. Jiao, and S. Torquato: Phys. Rev. Lett., 2012, vol. 108, p. 080601.10.1103/PhysRevLett.108.080601 ↗
41. C. Gommes, Y. Jiao, and S. Torquato: Phys. Rev. E, 2012, vol. 85, p. 051140.10.1103/PhysRevE.85.051140 ↗
42. Frenkel, Daan, and Berend Smit: Understanding molecular simulation: from algorithms to applications, Academic Press, San Diego, 2001.
43. V.A. Snyder, J. Alkemper, P.W. Voorhees: Acta Mater, 2000, vol. 48, pp. 2689-2701.10.1016/S1359-6454(00)00036-7 ↗
44. Hu, M.-K.: IRE Trans. Inf. Theory, 1962, vol. 8(2), pp. 179–87.10.1109/TIT.1962.1057692 ↗
45. Y. Jiao, F.H. Stillinger, and S. Torquato: Phys. Rev. E, 2007, vol. 76, p. 031110.10.1103/PhysRevE.76.031110 ↗
46. Roberts, A.P.: Phys. Rev. E, 1997, vol. 56, p. 3203.10.1103/PhysRevE.56.3203 ↗
47. Manwart, C., and R. Hilfer: Physical Review E, 1999, vol. 59.5, p. 5596.10.1103/PhysRevE.59.5596 ↗
48. E.Y. Guo, N. Chawla, T. Jing, S. Torquato, and Y. Jiao: Materials Characterization, 2014, vol. 89, p. 33.10.1016/j.matchar.2013.12.011 ↗
49. Y. Jiao, E. Padilla and N. Chawla: Acta Materialia, 2013, vol. 61, p. 3370.10.1016/j.actamat.2013.02.026 ↗
50. C. Manwart and R. Hilfer: Phys. Rev. E, 1999, vol. 59, p. 559610.1103/PhysRevE.59.5596 ↗
51. S. Torquato, C. L. Y. Yeong, M. D. Rintoul, D. L. Milius, and I. A. Aksay: J. Am. Ceram. Soc., 1999, vol. 82, p. 1263.10.1111/j.1151-2916.1999.tb01905.x ↗
52. Y. Jiao and N. Chawla: Integrating Materials and Manufacturing Innovation, 2014, vol. 3, p. 3.10.1186/2193-9772-3-3 ↗
53. S. Kirkpatrick, C. D. Gelatt, and M. P. Vecchi: Optimization by simulated annealing. Science, 1983, vol. 220, pp. 671-680.10.1126/science.220.4598.671 ↗