journal article·2014-05

Tensile Properties of Al-Cu 206 Cast Alloys with Various Iron Contents

K. Liu, X. Cao, X.-G. Chen

Publisher page

Abstract

The Al-Cu 206 cast alloys with varying alloy compositions (i.e., different levels of Fe, Mn, and Si) were investigated to evaluate the effect of the iron-rich intermetallics on the tensile properties. It is found that the tensile strength decreases with increasing iron content, but its overall loss is less than 10 pct over the range of 0.15 to 0.5 pct Fe at 0.3 pct Mn and 0.3 pct Si. At similar iron contents, the tensile properties of the alloys with dominant Chinese script iron-rich intermetallics are generally higher than those with the dominant platelet phase. In the solution and artificial overaging condition (T7), the tensile strength of the 206 cast alloys with more than 0.15 pct Fe is satisfactory, but the elongation does not sufficiently meet the minimum requirement of ductility (>7 pct) for critical automotive applications. However, it was found that both the required ductility and tensile strength can be reached at high Fe levels of 0.3 to 0.5 pct for the alloys with well-controlled alloy chemistry and microstructure in the solution and natural aging condition (T4), reinforcing the motivation for developing recyclable high-iron Al-Cu 206 cast alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. G.K. Sigworth and J.F. Major: Light Metals, San Antonio, TX, 2006, TMS Symposia Proceedings, TMS, Warrendale, PA, pp. 795–99.
2. V.S. Zolotorevsky, N.A. Belov, and M.V. Glazoff: Casting Aluminum Alloys, Elsevier Science, Oxford, 2007.
3. N.A. Belov, A.A. Aksenov, and D.G. Eskin: Iron Aluminum Alloys: Impurity and Alloying Element, Taylor & Francis, London, 2002.10.1201/9781482265019 ↗
4. H. Kamguo Kamga, D. Larouche, M. Bournane, and A. Rahem: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2844–55.10.1007/s11661-010-0293-4 ↗
5. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2004–16.10.1007/s11661-010-0578-7 ↗
6. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 1231–40.10.1007/s11663-012-9694-7 ↗
7. C.J. Tseng, S.L. Lee, T.F. Wu, and J.C. Lin: Mater. Trans. JIM, 2000, vol. 41, pp. 708–13.10.2320/matertrans1989.41.708 ↗
8. K. Liu, X. Cao, and X.G. Chen: TMS—Light Metals 2013, Wiley, San Antonio, TX, 2013, pp. 311–16.10.1002/9781118663189.ch54 ↗
9. K. Liu, X. Cao, and X.G. Chen: Light Metals—Advances in Materials and Processes, Metals Society, Vancouver, BC, 2010, pp. 113–20.
10. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1097–1101.10.1007/s11661-011-1004-5 ↗
11. K. Liu, X. Cao, and X.G. Chen: J. Mater. Sci., 2012, vol. 47, pp. 4290–98.10.1007/s10853-012-6279-4 ↗
12. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 682–95.10.1007/s11661-012-1419-7 ↗
13. S. Seifeddine, S. Johansson, and I.L. Svensson: Mater. Sci. Eng. A, 2008, vol. 490, pp. 385–90.10.1016/j.msea.2008.01.056 ↗
14. S.G. Shabestari: Mater. Sci. Eng. A, 2004, vol. 383, pp. 289–98.10.1016/j.msea.2004.06.022 ↗
15. S.S. SreejaKumari, R.M. Pillai, T.P.D. Rajan, and B.C. Pai: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 561–73.10.1016/j.msea.2007.01.082 ↗
16. C.J. Tseng, S.L. Lee, S.C. Tsai, and C.J. Cheng: J. Mater. Res., 2002, vol. 17, pp. 2243–50.10.1557/JMR.2002.0330 ↗
17. L. Zhang, W.L. Jiao, H.J. Yu, and G.C. Yao: Chin. J. Nonferrous Met., 2005, vol. 15, pp. 368–73.
18. H.K. Kamga, D. Larouche, M. Bournane, and A. Rahem: Int. J. Cast Met. Res., 2012, vol. 25, pp. 15–25.10.1179/1743133610Y.0000000012 ↗
19. J.Y. Hwang, H.W. Doty, and M.J. Kaufman: Mater. Sci. Eng. A, 2008, vol. 488, pp. 496–504.10.1016/j.msea.2007.12.026 ↗
20. C.H. Cáceres: J. Mater. Eng. Perform., 2000, vol. 9, pp. 215–21.10.1361/105994900770346178 ↗
21. C.H. Cáceres: Int. J. Cast Met. Res., 1998, vol. 10, pp. 293–99.10.1080/13640461.1998.11819245 ↗
22. M. Drouzy, S. Jacob, and M. Richard: AFS Int. Cast Met. J., 1980, vol. 5, pp. 43–50.
23. K. Liu, X. Cao, and X.G. Chen: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3494–3503.10.1007/s11661-013-1726-7 ↗
24. A. Couture: Int. Cast Met. J., 1981, vol. 6, pp. 9–17.
25. C.J. Tseng: Ph.D. Thesis, National Central University, Taiwan, 2003.
26. L. Ceschini, I. Boromei, A. Morri, S. Seifeddine, and I.L. Svensson: Mater. Des., 2012, vol. 36, pp. 522–28.10.1016/j.matdes.2011.11.047 ↗
27. J. Lapin and T. Pelachova: Mater. Sci. Eng. A, 1999, vol. 271, pp. 266–74.10.1016/S0921-5093(99)00210-5 ↗
28. J.G. Kaufman, E.L. Rooy, and American Foundry Society: Aluminum Alloy Castings: Properties, Processes, and Applications, ASM International, Materials Park, OH, 2004, pp. 71–92.10.31399/asm.tb.aacppa.9781627083355 ↗
29. T. Din and J. Campbell: Mater. Sci. Technol., 1996, vol. 12, pp. 644–50.10.1179/mst.1996.12.8.644 ↗