journal article·2000-01

Stress-strain response of a cast 319-T6 aluminum under thermomechanical loading

Huseyin Sehitoglu, Tracy Smith, Xinlin Qing, Hans J. Maier, J. A. Allison

Publisher page

Abstract

The stress-strain behavior of cast 319-T6 aluminum-copper alloys with three different secondary dendrite arm spacings (SDASs) was studied at high temperatures and under thermomechanical deformation, exposing marked cyclic softening. A two state-variable unified inelastic constitutive model proposed earlier was modified to describe the stress-strain responses of these alloys by considering the variation of hardening and recovery functions of back-stress and drag stress. The SDAS was incorporated in the model as a length-scale parameter, and the material constants were determined systematically from experiments on a cast 319-T6 aluminum with small and large SDASs. The capabilities of the constitutive model were checked by the comparisons of simulations to experiments in the small-strain regime (<0.005). The results show that the model provides successful simulations for material response after thermal exposure at high temperature and cyclic transient stress-strain behavior. The causes of mechanical behaviors at the macro scale are discussed based on microstructural changes during thermal exposure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. H. Sehitoglu: ASME J. Eng. Mater. Technol. 1989, vol. 111, pp. 192–203.10.1115/1.3226453 ↗
2. D.C. Slavik and H. Sehitoglu: in Thermal Stress, Material Deformation, and Thermo-Mechanical Fatigue, [ASME PVP 123,] H. Sehitoglu and S.Y. Zamrik, eds., ASME, Fairfield, NI.
3. D.C. Slavik and H. Sehitoglu: in Thermal Stress, Material Deformation, and Thermo-Mechanical Fatigue, [ASME PVP 123,] H. Sehitoglu and S.Y. Zamrik, eds., ASME, Fairfield, NI, 1987, pp. 65–74.
4. H. Sehitoglu: Handbook on Fatigue and Fracture, ASM, Materials Park, OH, 1996, vol. 19, pp. 527–54.10.31399/asm.hb.v19.a0002391 ↗
5. J.A. Eady and D.M. Smith: SAE Trans. 1984, vol. 93, pp. 747–55.
6. J.B. Andrews, and M.V.C. Seneviratne: Trans. AFMS, 1984, vol. 92, pp. 209–16.
7. R.B. Gundlach, B. Ross, A. Hetke, S. Valtierra and J.F. Mojica: AFS Trans., 1994, vol. 102, pp. 205–23.
8. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38 (10), pp. 1789–1802.10.1016/0956-7151(90)90291-N ↗
9. D.C. Drucker and L. Palgen: ASME J. Appl. Mech., 1981, vol. 48, pp. 479–85.10.1115/1.3157660 ↗
10. Y. Jiang and H. Sehitoglu: J. Appl. Mech., 1996, vol. 63, pp. 726–33.10.1115/1.2823356 ↗
11. H. Sehitoglu: in NATO ASI—Mechanical Behavior of Materials at High Temperature, C. Moura Branco, R. Ritchie, and V. Sklenicka, eds., Kluwer, Hingham, MA, 1996, pp. 349–79.10.1007/978-94-009-1714-9_19 ↗
12. S.R. Bodner and Y. Partom: ASME J. Appl. Mech. 1975, vol. 42, pp. 385–89.10.1115/1.3423586 ↗
13. M. Karayaka and H. Sehitoglu: in Fracture, and Nondestructive Evaluation of Advanced Materials, ASTM STP 1157, M.R. Mitchell and O. Buck, eds., APSTM, Philadelphia, PA, 1992, pp. 101–20.10.1520/STP15343S ↗
14. J. Boileau, P. Collins, and J.E. Allison: Proc. 5th Int. AFS Conf. on Molten Aluminum Processing, AFS Inc. Des Plaines, IL, 1998, pp. 157–72.
15. T. Hasegawa, T. Yakou, and U.F. Kocks: Acta Metall., 1982, vol. 30, pp. 235–43.10.1016/0001-6160(82)90061-X ↗
16. M.V. Heimendahl and G. Wassermann: Z. Metallkde., 1962, vol. 53, pp. 275–83.
17. M.C. Flemings, T.Z. Kattamis, and B.P. Bardes: AFS Trans. 1991, vol. 99, pp. 501–06.
18. A. Hetke and R.B. Gundlach: AFS Trans. 1994, vol. 102, pp. 367–80.
19. M.C. Flemings: Prem. Qual. Al. Castings, 1963, July pp. 60–63.
20. M.C. Flemings, S.Z. Uram, and H.F. Taylor: AFS Trans. 1960 vol. 68, pp. 670–84.
21. P. Reeber: Ford Research Laboratory, Dearborn, MI, Private Communication, 1998.
22. J. Weertman: J. Appl. Phys. 1957, vol. 28, p. 362.10.1063/1.1722747 ↗
23. K. Tanaka and T. Mura: ASME J. Appl. Mech. 1981, vol. 48, pp. 97–103.10.1115/1.3157599 ↗
24. L.M. Brown and W.M. Stobbs: Phil. Mag. 1971, vol. 23, pp. 1185–99.10.1080/14786437108217405 ↗
25. M.E. Ashby: in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds. Elsevier, Amsterdam, 1971, p. 137.
26. R.S.W. Shewfelt and L.M. Brown: Phil. Mag. vol. 35, 1977, pp. 945–62.10.1080/14786437708232636 ↗
27. T.J. Smith, H.J. Maier, H. Sehitoglu, and E. Fleury and J. Allison: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 133–46.10.1007/s11661-999-0201-y ↗