Comprehensive microstructural characterization in modified 9Cr-1Mo ferritic steel by ultrasonic measurements
Source abstract
Abstract
Modified 9Cr-1Mo ferritic steel (T91/P91) has been subjected to a series of heat treatments consisting of soaking for 5 minutes at the selected temperatures, starting from the α-phase region (1073 K) to the γ + δ-phase region (1623 K), followed by oil quenching. Hardness measurements, microstructural features, and grain-size measurements by the linear-intercept method have been used for correlating them with the ultrasonic parameters. Ultrasonic velocity and attenuation measurements, and spectral analysis of the first backwall echo have been used for characterization of the microstructures obtained by various heat treatments. As the soaking temperature increased above Ac1, the ultrasonic velocity decreased because of the increase in the volume fraction of martensite in the structure. There were sharp changes in the ultrasonic velocities corresponding to the two critical temperatures, Ac1 and Ac3. Ultrasonic longitudinal- and shear-wave velocities were found to be useful in identifying the Ac1 and Ac3 temperatures and for the determination of hardness in the intercritical region. However, ultrasonic attenuation and spectral analysis of the first backwall echo were found to be useful to characterize the variation in the prior-austenitic grain size and formation of δ ferrite above the Ac4 temperature. The scattering coefficients have been experimentally determined for various microstructures and compared with the theoretically calculated value of the scattering coefficients for iron reported in literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. B.K. Shah, Anish Kumar, M. Bandyopadhyay, A.K. Bandyopadhyay, and P.G. Kulkarni: INSIGHT, 1999, vol. 41 (11), pp. 707–09.
2. R.B. Mignogma, J.C. Duke, Jr., and R.E. Green: Mater. Eval., 1980, vol. 38, pp. 37–42.
3. N. Grayeli and J.C. Shyne: Review of Progress in Quantitative NDE, Plenum Press, NY, 1985, vol. 4b, pp. 927–37.
4. E.P. Papadakis: Metall. Trans., 1970, vol. 1, pp. 1053–57.10.1007/BF02811803 ↗
5. T. Jayakumar, H. Willems, and Baldev Raj: Trans. Ind. Inst. Met., 1991, vol. 44, pp. 327–38.
6. M. Rosen, L. Ives, S. Ridder, F. Biancaniello, and R. Mehrabian: Mater. Sci. Eng., 1985, vol. 74, pp. 1–11.10.1016/0025-5416(85)90104-1 ↗
7. R. Klinman and E.T. Stephencon: Mater. Eval., 1981, vol. 39, pp. 1116–20.
8. A. Vary: Mater. Eval., 1988, vol. 46, pp. 642–49.
9. Ulf Stigh: Eng. Fract. Mech., 1987, vol. 28, pp. 1–12.10.1016/0013-7944(87)90114-7 ↗
10. T.R.G. Kutty, K.N. Cndrasekharan, J.P. Pannakal, S.K. Ghoshal, and P.K. De: NDT Int., 1987, vol. 20, pp. 359–61.10.1016/0308-9126(87)90294-X ↗
11. D.W. Fitting and L. Adler: Ultrasonic Spectral Analysis for NDE, Plenum Press, New York, NY, 1981.
12. Anish Kumar, T. Jayakumar, P. Palanichamy, and Baldev Raj: Scripta Mater., 1999, vol. 40, pp. 333–40.10.1016/S1359-6462(98)00435-7 ↗
13. K. Honjoh: Jpn. J. Appl. Phys., 1994, vol. 33, pp. 1554–59.10.1143/JJAP.33.1554 ↗
14. O.R. Gericke: in The Future of Ultrasonic Spectroscopy, P.M. Reynolds, ed., British Non-Ferrous Metals Research Association, London, 1971.
15. E.P. Papadakis: J. Testing Eval., 1984, vol. 12, pp. 273–75.10.1520/JTE10727J ↗
16. Marc Dubois, A. Moreau, M. Militzerand, and J.F. Bussiere: Scripta Mater., 1999, vol. 39, pp. 333–40.
17. Annual Book of ASTM Standards, ASTM E112-88, ASTM, Philadelphia, PA, 1992, vol. 3. 01, pp. 294–326.
18. B.P.C. Rao, T. Jayakumar, D.K. Bhattacharya, and Baldev Raj: J. Pure Appl. Ultrasonics, 1993, vol. 25, pp. 53–59.
19. T. Jayakumar: Ph.D. Thesis, University of Saarland, Saarbruecken, Germany, 1997.
20. J. Orr, D. Burton, and C. Rasche: The Manufacture and Properties of Steel 91 for the Power Plant and Process Industries, Nov. 5, 1992, VDEh, Dusseldorf.
21. P.J. Alberry and W.K.C. Jones: Met. Technol., 1977, vol. 4, pp. 557–63.10.1179/030716977803292826 ↗
22. V.V. Muravev: Defectoscopiya, 1989, vol. 2, pp. 66–68.
23. B.J. Elkind, M. Rosen, and H.N.G. Wadley: Conf. Proc. Intelligent Processing of Materials and Advanced Sensors, Orlando, FL, Oct. 5–9, 1986, TMS-AIME, Warrendale, PA, 1987, pp. 49–60.
24. G. Benkisser: Metall. Werkstofftech., 1985, pp. 220–37 (German).
25. E.M. Papadakis: J. Appl. Phys., 1964, vol. 35 (5), pp. 1474–80.10.1063/1.1713652 ↗
26. H.M. Ledbetter: Materials at Lower Temperature, R.P. Reed and A.F. Clark, eds., ASM, Metals Park, OH, 1983, pp. 1–45.
27. G.R. Spiech, A.J. Schwoeble, and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 2031–37.10.1007/BF02643211 ↗
28. W. Koester and H. Franz: Metall. Rev., 1961, vol. 6 (21), p. 1–54.10.1179/095066061790425893 ↗
29. P. Palanichamy, A. Josheph, T. Jayakumar, and Baldev Raj: NDTE Int., 1995, vol. 28, pp. 179–85.10.1016/0963-8695(95)00011-L ↗
30. E.P. Papadakis: Physical Acoustics: Principles and Methods, 4b, Academic Press, New York, NY, 1981, pp. 269–370.
31. E.P. Papadakis: J. Acoust. Soc. Am., 1965, vol. 37 (4), pp. 703–10.10.1121/1.1909399 ↗
32. W.P. Mason and McSkimin: J. Appl. Phys., 1948, vol. 19, pp. 940–46.10.1063/1.1697900 ↗
33. W.A. Simpson Jr.: J. Acoust. Soc. Am., 1974, vol. 56, p. 1776.10.1121/1.1903512 ↗
34. R. Klinman, G.R. Webster, F.J. Marsh, and E.T. Stephenson: Mater. Eval., 1980, vol. 38, pp. 26–31.