Precipitation of β-Al5FeSi Phase Platelets in Al-Si Based Casting Alloys
Source abstract
Abstract
The aim of the present work has been to investigate the factors affecting the precipitation of the β-Al5FeSi iron intermetallic phase of directionally solidified A356- and 319-type alloys as a function of the iron content, a Sr addition of ~250 ppm, and superheating or cooling rates. The iron levels selected varied from 0.12 to 0.8 wt pct and cover the range of Fe levels in commercial casting alloys. The use of an end-chill mold provided different cooling rates along the height of the same casting, with dendritic arm spacing values that varied from ~15 to 85 μm, corresponding to levels of 5, 10, 30, 50, and 100 mm above the chill end. The microstructure and phase identification were monitored using optical microscopy, scanning electron microscopy (SEM), thermal analysis, and electron probe microanalysis (EPMA) techniques. An image analyzer was used in conjunction with the optical microscope for quantification purposes. The results showed that, for the range of cooling rates covered in the present study, the highest cooling rate (at a 5-mm distance from the chill) is the more significant parameter in controlling the size and distribution of theβ-Al2FeSi intermetallic phase in the nonmodified 319 and 356 alloys. The addition of strontium leads to fragmentation of coeutectic or posteutectic β platelets. This effect diminishes with an increase in the iron concentration, and further strontium addition leads to the precipitation of Al2Si2Sr phase particles, instead.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. P.N. Crepeau: AFS Trans., 1995, vol. 103, pp. 361–66.
2. S. Nishi, T. Shinoda, and E. Kato: J. Jpn. Inst. Light Met., 1968, vol. 18 (12), pp. 627–35.10.2464/jilm.18.627 ↗
3. D.L. Colwell and R.J. Kissling: AFS Trans., 1961, vol. 69, pp. 610–15.
4. R.C. Lemon and H.Y. Hunsiker: AFS Trans., 1956, vol. 64, pp. 255–60.
5. M. Tsukuda, M. Harada, T. Suzuki, and S. Koike: J. Jpn. Inst. Light Met., 1978, vol. 28 (3), pp. 109–15.10.2464/jilm.28.109 ↗
6. F.A. Badia: Mod. Cast., 1966, vol. 49, pp. 104–15.
7. J.E. Hatch: Aluminum: Properties and Physical Metallurgy, ASM, Metals Park, OH, 1984, pp. 320–50.
8. D.O. Northwood, X.C. Sun, G.E. Byczynski, and J.H. Sokolowski: Proc. Int. Symp. on Recent Metallurgical Advances in Light Metals Industries, 34th Annual Conf. of Metallurgists of CIM, S. MacEwen and J.P. Gilardeau, eds., Vancouver, BC, 1995, pp. 355–65.
9. L.A. Narayanan, F.H. Samuel, and J.E., Gruzleski: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1761–73.10.1007/BF02668540 ↗
10. D.A. Granger: AFS Trans., 1991, vol. 99, pp. 379–83.
11. L. Bäckerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, vol. 2, Foundry Alloys, AFS/Skanaluminium, Des Plaines, IL, 1990, pp. 71–84.
12. G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop: Metall. Trans. A, 1986, vol. 17A, pp. 45–52.10.1007/BF02644441 ↗
13. D.A. Granger, R.R. Sawtell, and M.M. Kersker: AFS Trans., 1984, vol. 92, pp. 579–86.
14. S.G. Shabestari and J.E. Gruzleski: Cast Met., 1994, vol. 6 (4), pp. 217–24.10.1080/09534962.1994.11819153 ↗
15. S.G. Shabestari and J.E. Gruzleski: Cast Met., 1994, vol. 6 (4), pp. 241–51.
16. A.M. Samuel, H.W. Doty, and F.H. Samuel: Proc. 4th Int. Conf. on Molten Aluminum Processing, Orlando, FL, AFS, Des Plaines, IL, 1995, pp. 261–94.
17. A.M. Samuel, F.H. Samuel, and H.W. Doty: J. Mater. Sci., 1996, vol. 31, pp. 5529–39.10.1007/BF01159327 ↗
18. L.A. Narayanan, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2161–74.10.1007/BF02670687 ↗
19. M. Drouzy and M. Richard: Fonderie, 1969, vol. 285, pp. 500–04.
20. J.C. Jaquet and H.J. Huber: Geissereiforschung, 1985, vol. 38 (1), pp. 11–20.
21. K.J. Oswalt and M.S. Misra: AFS Trans., 1980, vol. 88, pp. 845–62.
22. H. Samuel, P. Ouellet, A.M. Samuel, and H.W. Doty: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2871–84.10.1007/s11661-998-0194-y ↗
23. C. Mascré: Fonderie, 1955, vol. 108, pp. 4330–36.
24. A. Pennors, A.M. Samuel, and F.H. Samuel: ASF Trans., 1998, vol. 106, pp. 251–70.
25. C. Villeneuve and F.H. Samuel: Int. J. Cast Met. Res., 1997, vol. 12, pp. 145–60.10.1080/13640461.1999.11819352 ↗